1 / 3

How to Fix Virtually Any Hoverboards UK Problem Yourself

Whether you purchase your Swegways UK or self balancing scooter from us or another trader there are some practical issue that occur on rare occasions. It’s good to know that most of these issues can be solved quite simply with the correct knowledge.

smartboardsuk
Download Presentation

How to Fix Virtually Any Hoverboards UK Problem Yourself

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Fix Virtually Any Hoverboards UK Problem Yourself Whether you purchase your Swegways UK or self balancing scooter from us or another trader there are some practical issue that occur on rare occasions. It’s good to know that most of these issues can be solved quite simply with the correct knowledge. Since this is still new technology, sometimes problems can occur. We try to moderate this as much as possible by doing quality control in our built-up process however just like any electronic device, defects do occur as well as external circumstances can cause a scooter to break of malfunction. We suggest anyone who is having technical difficulties with a swegway to use this guide to try to solve their problem and write a comment something is unclear. Also, if you have any pointers to add to other readers feel free to comment, I am sure our readers will appreciate any practical advice from other users. or question if So let’s dive into the most common types of swegway errors and problems: Problems with calibration This is the most common problem. The symptoms of this the red warning light goes on. SOLUTION: do a recalibration of your scooter -The steps do a recalibration is: -Turn your scooter off -Put the Swegways UK on a perfectly smooth surface and make sure the wheels and axle are aligned straight and flat with the ground -Press the power button and hold it down for 5 seconds -The light will start blinking, when this happens release the power button -Now the calibration procedure has begun, leave the hoverboard UK alone to allow the process to complete. -Once the augmentation is complete the scooter should be ready to use as normal.

  2. Problem with the pads getting stuck This is another relatively common problem. When it happens, the board will not be able to sense the rider and won’t work properly. SOLUTION: Turn off your hoverboard Try to push down hard on the pads and release to see if you can get them back into place Upon doing so power up the Swegways UK, trial it, if this fails… Power off or switch off the hoverboard again, remove the lower plastic hoverboard case shell and try to relocate pads from inside the segway or hoverboard. Hoverboards UK Shakes when getting on or off (an infrared sensor problem) This is a common but unnerving issue. Thankfully it is usually a relatively quick fix. SOLUTION 1 (Cutting sensors): Remove the plastic cover, but be careful for cables and not to lose the screws from the cover. Locate the infrared balance sensor. It should look like this: Take a photo of how the cables are attached to avoid problems later. Remove the 4 screws that hold the sensor in place Use scissors to cut the sensor about 1.5 millimeters. Do the same for the second sensor; try to cut it as evenly as possible Now use the photo you took to reassemble the scooter and reattach the plastic case. POWER AND CHARGING PROBLEMS There are generally 2 types of problems that occur with power. They are: The scooter will not charge (due to losing contact with the charging port) The scooter will not start again after being charged (due to the Swegways UK losing contact with the power supply) SOLUTION: (some technical knowledge required)

  3. Power off the scooter Turn the Swegways UK over and unlock up the cover. Check carefully for loose wires and detached cables, if any are found press on them back together If this does not solve the problem inspect the wires for any damaged wires. Repair any found with repairing tape. Before touching the circuitry, make sure you are free of electric charges, i.e. not wearing cotton etc you can polarize yourself or use rubber gloves Inspect the board capacitors. If any are smashed they need to be replace, and probably the whole logic board could need to be replaced. If they are burnt or black they are damaged We will add more guides and tips in the future. Feel free to post any questions or comments below; we can also answer technical questions if you have a problem with your hoverboard UK. For getting more information feel free to contact our Smart Boards UK team at Address: Westland Ct, Leeds LS11 5ST, United Kingdom Phone: 0113 277 3733 Email: info@smartboardsuk.com Website: https://www.smartboardsuk.com/ You may also find us on

More Related