3 Important Techniques of Interior Concrete Finish Walls

1. 3 Important Techniques of Interior Concrete Finish Walls

2. Interior Designers always looks for creates something amazing with Experiments. Interior Concrete Finish Walls is one of the classic yet trending options in the market, which are used for Living room, Bedroom, Kitchen, Bathroom and even exterior area. There are mainly 3 types of Techniques to apply in this finishes.

3. Troweling / Floating • First, the Concrete tooled with a screed, after that Concrete finishers used trowels to smooth and fine-layer the concrete surface. • This process is done with two options depends on the work area, in a small area it can be done with manual, while work area on the big structure or in Industrial area the mechanical options is the make the work done.

4. Edging • The edging process allows the concrete to be rounded or angled, and the joints are made so that the cracks in the concrete are minimized. • A special type of tool is used for this process, as well as a little mastery is required to operate it. Edging also creates an amazing classic block design.

5. Broom Finish • Broom Finish is a simple but important technique to make concrete surfaces slip-resistant. This process is applied after placement, troweling and Leveling of the concrete. • After smoothing steps, a broom is dragged on the surface to make small ridges that helps in traction control while the Surface is wet. • Without a broom process, the direct concrete finish can be dangerous when liquids are on the surface.

6. FIND US www.sds-me.com