1 / 19

Types of reactors

Types of reactors. Reactor types. Classifications Classification by type of nuclear reaction Classification by moderator material Classification by coolant Classification by generation Classification by phase of fuel Classification by use. 1. Classification by type of nuclear reaction.

soleil
Download Presentation

Types of reactors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Types of reactors

  2. Reactor types Classifications • Classification by type of nuclear reaction • Classification by moderator material • Classification by coolant • Classification by generation • Classification by phase of fuel • Classification by use

  3. 1. Classification by type of nuclear reaction • Fission • Thermal reactorsuse slowed or thermal neutrons. Almost all current reactors are of this type. • Has neutron moderator materials that slow neutrons until their neutron temperature is thermalized [i.e., until their kinetic energy approaches the average kinetic energy of the surrounding particles.]

  4. Thermal neutrons have a far higher probability of fissioning the fissile nuclei U-235, plutonium-239 & Pt-241, and a relatively lower probability of neutron capture by U-238 compared to the faster neutrons that originally result from fission, allowing use of low-enriched uranium or even natural uranium fuel. • The moderator is often also the coolant, usually water under high pressure to increase the boiling point.

  5. Fission • Fast neutron reactorsuse fast neutrons to cause fission in their fuel. • It is a NO neutron moderator, and use less-moderating coolants. • Maintaining a chain reaction requires the fuel to be more highly enriched [isotope separation] in fissile material (~20% or more) due to the relatively lower probability of fission versus capture by U-238. • Less waste – but more difficult to build – more expensive to operate. – less common than thermal reactors • Some early power stations were fast reactors

  6. Nuclear fusion: • Fusion power is an experimental technology, generally with hydrogen as fuel. • Not suitable for power production. • Despite research having started in the 1950s, no commercial fusion reactor is expected before 2050. • ITER (International Thermonuclear Experimental Reactor) is an international nuclear fusion research and engineering project • Currently building the world's largest experimental fusion reactor in France.

  7. 2. Classification by moderator material - used by thermal reactors • Graphite moderated reactors • Water moderated reactors • Heavy water reactors • Light water moderated reactors (LWRs). • Use ordinary water to moderate and cool the reactors. • When at operating temperature, if the temperature of the water increases,  its density drops,  and fewer neutrons passing through it are slowed enough to trigger further reactions. • That negative feedback stabilizes the reaction rate. • Graphite and heavy water reactors tend to be more thoroughly thermalised than light water reactors. Due to the extra thermalization, these types can use natural uranium/unenriched fuel.

  8. Light element moderated reactors. These reactors are moderated by lithium or beryllium. • Molten salt reactors (MSRs) are moderated by a light elements such as lithium or beryllium, which are constituents of the coolant/fuel matrix salts LiF and BeF2. • Liquid metal cooled reactors, such as one whose coolant is a mixture of Lead and Bismuth, may use BeO as a moderator. • Organically moderated reactors (OMR) use biphenyl and terphenyl as moderator and coolant.

  9. 3. Classification by coolant • Water cooled r.[in USA – 104 operating reactors  69 are pressurized water reactors (PWR), & 35 are boiling water reactors (BWR) • Pressurized water reactor (PWR): • A primary characteristic of PWRs is a pressurizer, a specialized pressure vessel. • Most commercial PWRs and naval reactors use pressurizers. • Pressurisedheavy water reactors • A subset of pressurized water reactors, sharing the use of a pressurized, isolated heat transport loop, • but using heavy water as coolant and moderator for the greater neutron economies it offers.

  10. Boiling water reactor (BWR): • BWRs are characterized by boiling water around the fuel rods in the lower portion of a primary reactor pressure vessel. • A boiling water reactor uses 235U, enriched as uranium dioxide, as its fuel. • The fuel is assembled into rods  that are submerged in water  and housed in a steel vessel. • Fission causes the water to boil,  generating steam. • This steam flows through pipes into turbines. • The turbines are driven by the steam, and this process generates electricity. • During normal operation, pressure is controlled by the amount of steam flowing from the reactor pressure vessel to the turbine.

  11. Liquid metal cooled reactor. Since water is a moderator, it cannot be used as a coolant in a fast reactor. Liquid metal coolants  sodium, NaK, lead, lead-bismuth, and in early reactors, mercury. • Sodium-cooled fast reactor • Lead-cooled fast reactor

  12. Gas cooled reactors.  cooled by a circulating inert gas, often helium,CO2 • Molten Salt reactors (MSRs).  cooled by circulating a molten salt, typically mixture of fluoride salts.

  13. 4. Classification by generation • Generation I reactor • Generation II reactor (most current nuclear power plants) • Generation III reactor (evolutionary improvements of existing designs) • Generation IV reactor (technologies still under research)

  14. G IV r.: The primary goals being to • improve nuclear safety • improve proliferation [to increase/spread at a rapid rate] resistance • minimize waste and • minimize natural resource utilization, and • decrease the cost to build and run such plants

  15. Generations

  16. Generation V+ reactors! • Generation V reactors are designs which are theoreticallypossible, but which are not being actively considered or researched at present. • Prob.: little interest for reasons of economics, practicality, or safety. • E.g., • Liquid core r. – molten uranium • Gas core r. – gaseous uranium-hexafluoride

  17. 5. Classification by phase of fuel • Solid fueled • Fluid fueled • Aqueous homogeneous reactor • Molten salt reactor • Gas fueled (theoretical)

  18. 6. Classification by use • Electricity • Nuclear power plants  • Propulsion • Nuclear marine propulsion • Various proposed forms of rocket propulsion [spacecraft] • Other uses of heat • Desalination • Heat for domestic and industrial heating

  19. Trend - • Current technologies - as above • Future and developing technologies • Advanced reactors • Generation IV reactors • Generation V+ reactors • Fusion reactors

More Related