Fire Doorsets & 3 rd Party Accreditation

1. Fire Doorsets & 3rd Party Accreditation Julian Vollans DipFD – Noberne Doors Ltd 26th March 2013

2. About noberne doors ltd • Julian Vollans – General Manager for Noberne Doors Ltd • Noberne Doors Ltd – Established in 1975 in Leeds. Manufacture bespoke High Performance Specialist Doorsets; including FD30, FD60, FD90, FD120, X-Ray and Bullet Resistant. • Founder Members of the BM TRADA “Q-Mark” Scheme (3rd Party Accreditation body). • ISO9001:2008 Quality Standard & Forestry Stewardship Council (FSC) Accredited (timber only from sustainable sources).

3. overview • Fire Doorsetsvs Fire Door Assemblies (or kits) • Why choose Fire Doorsets? • Approved Fire Doorset Installation • The importance of Primary Test Evidence & 3rd Party Accreditation • Summary

4. What are fire doorsets? • Fire Doorsets play a vital role in protecting a building from fire • They protect escape routes and allow safe evacuation in case of a fire • Fire Doorsets must be tested by the manufacturer • The complete design will be awarded official certification on a successful fire test result. • Fire Doorsets comprise of; • Door + frame / linings • Closers, Hinges and other ESSENTIAL ironmongery • Seals • Glazing system

5. FIRE DOORSETS vs. assemblies (kits) • Definition – Fire Doorset • The British Standard BS EN 12519 provides the following definition: ‘complete unit consisting of a door frame and a door leaf or leaves, supplied with all essential parts from a single source’. • This means that a door leaf is factory pre-hung in its frame, with hinges, glazing system, fire and smoke seals, and ironmongery. It is supplied as a complete unit. • A Fire Doorsetis sourced, from a single manufacturer, with all components matched and pre-assembled in the factory and is covered by a single fire certificate.

6. FIRE DOORSETS vs. assemblies (kits) • Definitions – Assemblies (Kits) • Fitting together various component parts including; door leaf or leaves, frame, glazing system (factory fitted only), essential ironmongery and fire and smoke seals all from one or more sources. • This means the compatibility of each product needs to be scrutinized to ensure they ALL comply collectively.

7. What’s the difference? 1. Frame Versus Fire Doorset Assembly or Kit

8. Assemblies= headaches? • You have to coordinate the purchase and supply of the door, frames, intumescent seals, hinges and other ironmongery. • Who will provide the important fire test certificate you need? • Is it cost effective, will remedial work be necessary shortly after installation? • What about quality? • Will the components be compatible and contain a fire? • From July this year CE Marking on Fire Doorsets could make this method obsolete! • IT IS YOUR RESPONSIBILITY! You have to do your research correctly, get it wrong and it could be very costly to put right! (Prosecution or Custodial Sentences).

9. Why choose fire doorsets? • A Fire Doorsetmanufacturer will; • Provide the door, frame, seals and essential ironmongery as one package. • Have had products tested by a UKAS (United Kingdom Accreditation Service) laboratory as a complete set to BS476 Part 22: 1987 or EN1634-1:2000 – The same set you will receive on site. • Have undergone stringent audit processes to achieve 3rd Party Accreditation and Factory Production Controls, ensuring consistent quality products. • Supply you with documentary evidence with a valid fire test certificate. • Offer complete technical advice for managing and maintaining doorsets for the life of the product. • Sleep easy at night!

10. Approved fire doorsetInstallation • “The Fire Doorsetis a complex product, however. Every component - the door leaf or leaves, the frame in which the door is hung, essential hardware, intumescent and smoke sealing devices – must be correctly designed and installed”. • Peter Barker – Senior Consultant at Chiltern International Fire

11. Poor fire door installations Case Study – Hotel, Sheffield: August 2011 (opened in Spring 2011) Architectural & Specialist Door Manufacturers Association – Best Practise Guide

12. Poor fire door installations • Case Study – College in North Yorkshire: June 2012

13. Poor fire door installations • Case Study – Ward Kitchen – Local NHS Trust (Dec 2012) • Use of incorrect screw (minimum of 50mm with chipboard cores) Should chipboard cores be used in areas of high traffic?

14. Approved Installation • Use approved installers, don’t break the chain! • Take Advice! • Take Control!

15. Primary test evidence & 3rd party accreditation • Through 3rd Party Accreditation and Factory Production Controls, you will receive a product that is constantly the same standard time after time. ISO9001:2008 is a basic requirement of the BM TRADA “Q-Mark” Scheme • Peace of mind, knowing that you will have a Fire Certificate proving you have undertaken your duty of care on behalf of the building user.

16. 3rd Party Accreditation On product identification Orange Tree indicates a glazed FD60 Doorset Silver Tree indicates factory hung Doorset Gold Tree indicates installation by a BM TRADA approved installer

17. How 3rdParty Accreditation works Test House Manufacturer tests products at UKAS test house Certificate provides evidence UKAS approved body checks evidence Checks regularly audited products against evidence by testing 3rd Party Accreditation Manufacturer Manufacturer has ISO9000 QMS 3rd Party audits the Company and its products Installation Is this the weakest link?

18. In summary • Buy Fire Doorsets once from one source, i.e. a 3rd Party Accredited Manufacturer. • Reduce your responsibility and gain peace of mind. • Use approved installers. • Insist on 3rd Party Accreditation. • Any Questions?

19. Thank you. • Noberne Doors Ltd • Lupton Street • Leeds, LS10 2QP • www.nobernedoors.co.uk • 0113 2778577