1 / 25

Light and dark adaptation

Light and dark adaptation. The range of light levels over which we can see Why do we need adaptation? The design problem Role of pupil changes The duplex retina: four comparisons of rod-based and cone-based vision Dark adaptation and pigment bleaching Light adaptation: Weber’s Law

spence
Download Presentation

Light and dark adaptation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Light and dark adaptation • The range of light levels over which we can see • Why do we need adaptation? • The design problem • Role of pupil changes • The duplex retina: four comparisons of rod-based and cone-based vision • Dark adaptation and pigment bleaching • Light adaptation: Weber’s Law The response of visual neurons

  2. Luminance and retinal illumination Sun Fluorescent light/bulbs White paper, full sunlight Candle flame Comfortable reading Print read with difficulty White surface, moonlight Threshold for cone vision White surface, moonless night Visual threshold The range of luminances (left) and retinal illumination (right) found in the natural world

  3. Rod and cone operating ranges

  4. Light reflected from a surface under low and high illumination The ratio of light intensities reflected from the white surround and the black letter is 9:1 under both low and high illuminations.

  5. Consider and comment: A white page inside a room reflects less light than a black stone on a sunny beach, yet the page looks white and the stone looks black

  6. The sensations of blackness and lightness depend on the contrast of the stimulus, not on the absolute amount of light reflected off any one part of it.

  7. Luminance difference between ‘L’ and background = 80 units 8000 units Background = 90 units 9000 units Response  Difference/Background 80/90 (89%) 8000/9000 (89%)

  8. The eye’s sliding scale of brightness log luminance log illuminance A piece of white paper that is dimly lit (A) looks white because its luminance lies at the top of its local scale, even though this luminance may be less than that of a piece of black paper that is brightly lit (B).

  9. Mechanisms that enable us to see over a wide range of light intensities: • Pupil changes • Duplex retina: rods & cones  • Dark adaptation & pigment bleaching • Light adaptation of the visual system and individual neurons (Webers Law)

  10. Rods & cones: 4 key differences between scotopic and photopic vision • Contrast sensitivity • Distribution of rods and cones • Spectral sensitivity of rods and cones • Sensitivity to light of rods and cones.

  11. 1. Contrast sensitivity functions at three different light levels Spatial frequency (cycles/degree) Sensitivity (1/threshold contrast) Spatial Frequency (cycles/mm on retina)

  12. 2. Distribution of rods and cones visual eccentricity (deg) spatial density (cells/square mm) macula lutea cones rods retinal eccentricity (mm)

  13. Convergence

  14. 3. Spectral sensitivity curves for rod and cone vision Relative sensitivity Wavelength (nm)

  15. Purkinje effect • A shift in the colour appearance at dusk. • Reds look darker, blues look brighter

  16. 4. Sensitivity to light of rods & cones: Dark Adaptation Low Log. light sensitivity 7 minutes High Time in dark (min)

  17. Duplex function • 1. Rods are more sensitive than cones (x50) • 2. There are more rods than cones (x10) • 3. Ganglion cells have larger RFs for rods than cones (i.e. more post-receptoral summation)

  18. Dark adaptation curves Low Log. light sensitivity Rods Cones High Time in dark (min)

  19. The “design” problem • To detect differences in luminances across the visual scene • Scale the response to these differences according to the ambient light level In solving the problem, we must: 1. Have good sensitivity to luminance differences 2. Be able to operate across a wide range of ambient light levels 3. Cope with a limited neural response range

  20. Contrast sensitivity and operating range Brightness Brightness Relative light intensity Intensity Large operating range but poor contrast sensitivity Good contrast sensitivity but small operating range

  21. Increment threshold curve Log increment threshold (delta I) WEBER’S LAW Log background intensity (I)

  22. Weber’s Law • I/I = constant • Our sensation is determined by the percentage difference in the luminance of a surface relative to its background • This holds over a wide range of background (ambient) luminances

  23. I1 I2 I3 Mean light levels I I A single neuron can shift its operating range according to the mean light level. The light increment (delta I) required to obtain a criterion response is scaled up or down, according to the mean light level. This is known as GAIN CONTROL. Response (ips) Flash intensity log 1 1.5 10 15 100 150 I = 0.5 I = 5 I = 50

  24. Ganglion cell adaptation

  25. Receptoral adaptation

More Related