10 likes | 132 Views
Preliminary test of passive decay heat removal system. In- Guk Kim, In Cheol Bang* School of Mechanical and Nuclear Engineering Ulsan National Institute of Science and Technology (UNIST) 50 UNIST- gil , Ulju -gun , Ulsan 689-798, Republic of Korea.
E N D
Preliminary test of passive decay heat removal system In-GukKim, In Cheol Bang* School of Mechanical and Nuclear Engineering Ulsan National Institute of Science and Technology (UNIST) 50 UNIST-gil, Ulju-gun, Ulsan 689-798, Republic of Korea 5th Korea – Japan Joint Seminar on Nuclear Thermal Hydraulics and Safety for Students and Young Researchers Introduction Experiment • SAMPLE • SAMPLE Ga • SAMPLE Advantages O • SAMPLE Results and Discussion • SAMPLE Ultimate Goal • SAMPLE MARS Simulation • SAMPLE. Conclusions and Further work • SAMPLE. References Mochizuki, M. et al. (2013). “Prevention Possibility of Nuclear Power Reactor Meltdown by use of Heat Pipes for Passive Cooling of Spent Fuel,” Frontiers in Heat Pipes, 4, pp.013001. Wang, C. et al. (2013). “Study on the characteristics of the sodium heat pipe in passive residual heat removal system of molten salt reactor,” Nucl. Eng. Design., 265, pp.691-700. Wong, S. C. et al. (2008). “Visualization and Performance Measurement of Operating Mesh Wicked Heat Pipes,” Int. J. Heat Mass Transfer, 51, pp.4249-4259.