1 / 9

Optimizing Air-blast Sprayers In The Agriculture

The first step in enhancing spray quality is proper sprayer maintenance and operation. This post will go over six processes for calibrating and optimizing sprayer output in your vineyard spray equipment.

sprayshop
Download Presentation

Optimizing Air-blast Sprayers In The Agriculture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Optimizing Air-blast Sprayers In The Agriculture https://www.sprayshop.co.nz/

  2. The goal of every pesticide treatment is to ensure that every drop reaches the crop. Spray or drift from orchard spraying equipment that enters the air plainly misses the aim, resulting not only in harmful environmental and health repercussions but also in financial waste.

  3. Steps For Optimizing Air-blast Sprayers Step 1: Check The Speed Step 2: Change The Air Direction

  4. Check The Speed Tractor speedometers, particularly in older models, are often known for their inaccuracies. Precision in speed measurement is crucial, as it plays a key role in tracking calibration processes for optimal coverage.

  5. Change The Air Direction Spray droplets are carried by air; thus, wherever the air flows, droplets will follow. As a result, it is necessary to guide the air compressor into the top layer or compensate for air that is unable to be redirected.

  6. The Expected Nozzle Output The gallons/minute for every nozzle may now be determined once the right nozzles have been utilized to match the air orientation with the canopy design (step 2).

  7. Determine Nozzle Output Any nozzle that deviates more than 10% from the predicted value should be replaced. If more than two nozzles fail, replace them all.

  8. Check For Coverage Now that your air volume, spray results, as well as nozzle orientation are right, use water-sensitive paper (WSP), which is a yellow paper that becomes blue when wet. Wear nitride gloves when utilizing WSP since moisture in the fingertips causes the card to become blue.

  9. Thank You North Island - 09 974 7516 South Island - 03 974 1524 https://www.sprayshop.co.nz/

More Related