1 / 27

FE Series Electrical IMM

BOLE's high-end electrical injection moulding machine offers energy-saving, stability, and multi-function capabilities compared to traditional hydraulic machines. Enjoy precision, adaptability, and intelligence with touchable technology.

srayl
Download Presentation

FE Series Electrical IMM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FE Series Electrical IMM --MAKE HIGH-END TOUCHABLE

  2. Our sales network covers more than 73 countries GREE AUX GREE SHIJI JINGXIN HUA XIANG

  3. Advantage Of Full Electrical Injection Moulding Machine Compared to the traditional hydraulic injection moulding machine 01 02 03 04 05 06 07 Energy saving Efficiency Intelligence Multi-function Adaptability Precision Stability

  4. High –End

  5. High-End 115,200,000 + Movement • 10,000 mm/s+ Speed of ball • +/-0.002mm Position tolerance • 290 ton+ Load Ball Screw

  6. Untouchable Friction Temperature Viscosity Dust

  7. Untouchable 01 Need special high-temperature grease from Japan 02 Need good workshop environment, no dust and stable temperature

  8. Touchable • Patented Enclosed Ball Screw Structure

  9. Touchable Take heat away by grease to keep temperature stable Protected by barrel against dust Keeping lubrication

  10. Touchable BOLE ORIGINAL DESIGN——Enclosed ball screw structure Take away friction heat rapidly,reducing ball screw temperature and abrasion Avoid dust pollution and request of working environment is low Expensive and imported ball screw lubrication grease is unnecessary More easy for maintenance and no need to clean fatlute Reliable,no lubrication channel 1 2 3 4 5

  11. Touchable stable temperature of the feeding throat The stable temperature of the feeding throat prevents the instability of the feed due to the change of the temperature, affects the screw plasticization and injection accuracy, and improves the stability of the whole machine.

  12. High –End

  13. Untouchable To select a suitable machine for high quality mold

  14. Touchable To select a suitable machine for high quality mold

  15. Touchable Central clamping structure IMM with traditional structure can produce 100pcs products at most via 100kgs material.BOLE IMM can produce 102-105pcs products with same mold via 100kgs material.Save 2-5% material； Less flash and trim work,saving labor cost； 100% clamping force is used and higher 10-20% than traditional structure； The clamping force is focused on mold center and less deformation,which can protect the mold,platen and tie bar； Traditional structure's clamping force is wasted and used only 80-90%.The moving platen will be deformation and cause flash,material/labor waste.

  16. Touchable E-version Of Central Clamping Toggle System +/-0.01mm Position tolerance 01 02 03 04 Clamping force is used more effective The machine is strong adaptability and wide versatility Less deformation of platen and mold,save material 2%-5% Clamping force is focused on the mold center.Large mold reduce the center part of the flash,small mold,platen less deformation

  17. Touchable Big opening stroke,fitting for IML&Automation

  18. Touchable No contact tie bar Tie bar is not touch with moving platen, no lubrication and ensure the mold area clean。

  19. Linear guideway Clamping movement adopts the Linear guideway, high-precision, high-strength linear guide with sliding foot are used to support the moving platen, to ensure the positioning accuracy. Faster opening and closing speed can be obtained due to low resistance, performance of the whole machine is further improved.

  20. High –End

  21. Untouchable 01 02 03 Need extra hydraulic station Large power consumption No intergrated hydraulic control

  22. Touchable Servo Hydraulic Pump Station As Standard Servo hydraulic pump station,energy-saving effects more obvious Symmetric double hydraulic carriage cylinder,providing sufficient force to offset Matching hydraulic core to meet more mold needs 01 Arrange double hydraulic cylinder symmetrical Hydraulic core pulling 02 Hydraulic ejection 03 Servo Hydraulic Pump Station

  23. High –End

  24. E225H E325H E225 E325 AA型 AA型 AA型 AA型 B型 B型 B型 B型 C型 C型 C型 C型 Standard combination configuration BL110FE A型 A型 BL150FE A型 A型

  25. BOLE electrical IMM-Make High-End Touchable 1.Totally-Enclosed Ball Screw 2.E-Centre Clamping Structure 3.Stardand Servo Hydraulic Pump 4.Belt-pully transfer,fit for thinwall&thickwall application

  26. BOLE electrical IMM-Make High-End Touchable BOLE Brand Clamping unit Ball Screw Hrdraulic station Position precise Others Large inclined angle Common open Ball Screw external +/-0.01mm Central clamping Encapsulated Ball Screw Embed +/-0.01mm

  27. 感 谢 聆 听 Thanks for listening

More Related