390 likes | 407 Views
Learn about important safety practices and equipment in construction. Identify hazards, understand fall protection, and ensure a safe work environment.
E N D
CONSTRUCTION MASTERS 12345BONUS 678910BONUS 1112131415BONUS 1617181920BONUS 2122232425BONUS 2627282930BONUS
QUESTION # 1 ABCD
QUESTION # 2 ABCD
QUESTION # 3 ABCD
QUESTION # 4 ABCD
QUESTION # 5 ABCD
QUESTION # 6 ABCD
QUESTION # 7 ABCD
QUESTION # 8 ABCD
QUESTION # 9 ABCD
QUESTION # 10 ABCD
QUESTION # 11 ABCD
QUESTION # 12 ABCD
QUESTION #13 ABCD
QUESTION #14 ABCD
QUESTION # 15 ABCD
QUESTION # 16 ABCD
QUESTION # 17 ABCD
QUESTION # 18 ABCD
QUESTION # 19 ABCD
QUESTION # 20 ABCD
QUESTION # 21 • Change from an accepted, normal, or correct procedure that usually causes an accident is called an __________ act. • A ABNORMALITY • B ALTERATION • C UNSAFE • D HAZARDOUS ABCD
QUESTION # 22 • Safety signs with a white background, green panels and white letters are used to give information on where to find important areas such as Material safety data sheet or ( _________ ) stations. • A OSHA • B EYE WASH • C DOCUMENT • D MSDS ABCD
QUESTION # 23 THIS IS AN EXAMPLE OF WHAT? A – FARM EQUIPMENT B – HAZARDOUS WORK C – PROXIMITY WORK D – CONFINED SPACES ABCD
QUESTION # 24 THESE TAGS ARE USED FOR: A – FIRE EXTINGUISHERS B – TAGOUT C – WARNING LABELS D – GFCI DANGER ABCD
QUESTION # 25 NAME THIS DEVICE: A – HARNESS B – SAFETY BELT C – LANYARD D – D-RING ABCD
QUESTION #26 A SHOCK ABSORBING LANYARD IS USED IN CONJUCTION WITH A SAFETY HARNESS TO DO THE FOLLOWING: A CREATE DECELLERATION TO PREVENT INJURY B ACCELERATE THE FALL AND PREVENT INJURY C PREVENT SWING FALL HAZARDS D PART OF “FALL RESTRAINT” AND STOPS WORKERS JUST SHORT OF THE AREA WHERE A FALL COULD OCCUR ABCD
QUESTION #27 THE “D” RING ON A SAFETY HARNESS IS LOCATED WHERE? A FRONT AT BELT BUCKLE B BETWEEN SHOULDERS ON BACK C LOWER BACK D SWIVELS FOR MULTIPLE SETUPS ABCD
QUESTION #28 WHICH OF THE FOLLOWING IS NOT A TRUE STATEMENT: A FALLS ARE THE LEADING CAUSE OF DEATH IN THE WORKPLACE B MOST FATALITIES OCCUR WHEN WORKERS FALL FROM OPEN-SIDED FLOORS AND OPENINGS C FALLS FROM AS LITTLE AS 4 TO 6 FEET CAN CAUSE DEATH OR SERIOUS INJURY D OPEN-SIDED FLOORS AND PLATFORMS THAT ARE MORE THAN 10 FEET HIGH MUST BE GUARDED ABCD
QUESTION #29 A SAFETY HARNESS & BELT IS PART OF WHAT KIND OF SYSTEM? A PERSONAL FALL GUARDING SYSTEM B PERSONAL FALL PREVENTION SYSTEM C PERSONAL FALL ARREST SYSTEM D PERSONAL FALL CATCH SYSTEM ABCD
QUESTION #30 WHICH MOST ACCURATELY DESCRIBES A SITE BUILT WOOD GUARD RAIL SYSTEM? A TOP RAIL 42”, MIDDLE RAIL, TOEBOARD B TOP RAIL 30”, MIDDLE RAIL C TOP RAIL 28”, MIDDLE RAIL 16”, TOEBOARD D TOP RAIL 28”, MIDDLE RAIL 12” ABCD
BONUS # 1 • The following are examples of “unsafe conditions” except for which? • A poor housekeeping • B poor lighting • C horseplay • D overcrowding ABCD
BONUS # 2 Prior to using any scaffold, it must first be inspected by: A the competent person B the qualified person C the worker D the building inspector ABCD
BONUS # 3 Before pulling the pin on a fire extinguisher you should be positioned at least ____ feet from the fire so that burning objects or debris do not scatter and cause the fire to spread. A 10 B 6 C 5 D 4 ABCD
BONUS # 4 One of the most common types of safety grounding systems is the ______. A Three wire system B Two wire (+ / -) with ground C GFCI D Double Insulated ABCD
BONUS # 5 THE NATIONAL TESTING AGENCY RESPONSIBLE FOR EYEGLASS AND PPE SAFETY IS: A – OSHA B – NCCER C – ANSI D - MSDS ABCD
BONUS #6 OSHA REQUIRES SOME METHOD OF FALL PROTECTION IF WORK IS BEING PERFORMED AT OR ABOVE: A 10 FT. B 8 FT. C 6 FT. D 4 FT. ABCD