20 likes | 111 Views
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: SG3a Suggested Channel Model Graphic Date Submitted: 12 April, 2002 Source: Stan Bottoms Company: Time Domain Corporation Address: 7057 Old Madison Pike, Huntsville, AL, USA 35806
E N D
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: SG3a Suggested Channel Model Graphic Date Submitted: 12 April, 2002 Source: Stan Bottoms Company: Time Domain Corporation Address: 7057 Old Madison Pike, Huntsville, AL, USA 35806 Voice: 1-256-428-6534 E-Mail: stan.bottoms@timedomain.com Re: [UWB Channel Model] Abstract: [Suggested UWB channel model graphic] Purpose: [To support the channel model discussions in conjunction with the establishment of the Alternative PHY standard for IEEE 802.15.3a.] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that these viewgraphs become the property of IEEE and may be made publicly available by P802.15. Stan Bottoms, Time Domain
RFI = RF interference • Path loss is accounted for in the multipath model • Any channel-induced signal distortion is accounted for in the multipath model • Radio-induced distortion (e.g. compression) should not be part of the channel model • Channel noise and interference are part of the channel model, but distinct from the multipath model Stan Bottoms, Time Domain