THERMAL INSULATION TECHNOLOGY

1. THERMAL INSULATION TECHNOLOGY

2. Politerm: a successful transfer of theory to practical • Superlight inert made of EPS vergin beads preadditivated with EIA (Edilteco Insulating Additive) • Suitable for the preparation of lightweight – thermal insulating mortars • To be mixed with cement and water, NO SAND REQUIRED • Preadditivated at the factory = constancy of use and final results

3. Politerm: a successful transfer of theory to practical • Perfect mixing with the water binder • Homogeneous distribution within the mixture • Light: just as low as from 200 kg/m3! • High thermal insulation: λ = 0,067 W/Mk • Perfect pumping capacities • Prevention of the polystyrene beads from floating. POLITERM INTERMEDIATE LAYER AND PIANO ZERO (230) POLITERM ROOFING AND FCA (215) MANUAL OF USE TECHNICAL DATA SHEET

4. Thermal insulation on roofs Thermal insulation in attics Thermal insulation and lightening on floors single-layer Thermal insulation and lightening and levelling on floors intermediate layer under screed Thermal insulation for basements -single-layer-intermediate layer under screed Politerm applications

5. Thermal insulation, lightening and gradient formation on terraces single-layer Politerm applications

6. Thermal insulation, lightening and gradient formation on terraces Intermediate layer under screed Politerm applications

7. Thermal insulation, lightening and gradient formation on flat roofs under waterproofing layer Politerm applications

8. Thermal insulation, lightening and levelling intermediate layer under floor heating system Politerm applications

9. Thermal insulation, lightening and levelling on vaulted floors Politerm applications

10. POLITERM Politerm: preparation + POLITERM THE LIGHTWEIGHT THERMAL INSULATING MORTAR NO SAND IN THE MIXTURE CEMENT + CLEAN WATER

11. Politerm: preparation Cement mixer (*) Truck mixer (**) (**): 500 litres packaging recommended (*): 200 litres packaging recommended

12. Politerm equipment POLITERM MACHINE • Suitable for mixing and pumping of lightweight mortars • Capacity: 10-12 m3 /h of mortar • Tank: 1000 lt • Pumping distance: 120 m horizontally and >30 m vertically • Electrical power 7,5 kW – 380 V • Weight: 800 kg Other versions: • With automatic dosage of water • Diesel engine TECHNICAL DATA SHEET HIGH PRODUCTIVITY !

13. Politerm equipment ISOLCAP MACHINE • Suitable for lightweight mortars and selflevelling mortars • Capacity: 3 m3 /hour of mortar • Tank: 260 lt • Pumping distance: 50 m horizontally and 25 m vertically • Electrical power 6 kW – 380 V • Weight: 128 kg VERSATILE AND PORTABLE ! TECHNICAL DATA SHEET

14. Politerm equipment POLITERM PUMP • Suitable for pumping of premix lightweight mortars • Capacity: 500 litre/minute • Tank: 200 lt • Pumping distance: 120 m horizontally and 60 m vertically • Electrical power: 7,5 kW – 380-220 V • Weight: 300-350 kg POWERFUL AND RELIABLE ! TECHNICAL DATA SHEET

15. Politerm equipment POLITERM BLOW READY MIX • Suitable for blowing of Politerm into the truck mixer • Capacity: 750 litre/minute • Tank: 760 lt • Pumping at 4 m high • Electrical power: 0,75 kW – 380 V • Weight: 300 kg PRACTICAL AND QUICK !

16. Politerm based Readymix products HORIZONTAL INSULATION AND LIGHTENING VERTICAL WALLS AND CEILING

17. Readymix: vertical walls and ceilings ISOLTECO • Lightweight and Highly thermal insulating plaster • Composition: EPS virgin beads and special additives • λ = 0,058 W/m°K • Density: 150 kg /m3 • Compressive resistance: 1,07 N/mm2 • μ = 12,67 • Sound insultaion: 7dB at 6 cm thickness • Application: with plastering machine TECHNICAL DATA SHEET MANUAL OF USE

18. Thermal insulation on ceiling External thermal insulation Elimination of thermal bridges 4. Thermal insulation in-between walls 5. Internal thermal insulation Readymix: vertical walls and ceilings ISOLTECO SUITABLE FOR THE INSULATION OF: • CEILING • EXTERNAL WALLS • ELIMINATION OF THERMAL BRIDGES • IN-BETWEEN WALLS* • INTERNAL WALLS *ISOLTECO WALL (0,42 N/mm2)

19. Readymix: vertical walls and ceilings ISOLSAN • Dehumidifying plaster, lightweight and with high thermal insulating properties • Composition: EPS virgin beads and special additives • λ = 0,068 W/m°K • Density: 230 kg /m3 • Compressive resistance: 1,28N/mm2 • μ = 9,0 • Bag: 60 lt yeld • Application: with plastering machine MANUAL OF USE (Isolteco) TECHNICAL DATA SHEET

20. Thermal insulation on ceiling External thermal insulation Elimination of thermal bridges 5. Internal thermal insulation Readymix: vertical walls and ceilings ISOLSAN SUITABLE FOR THE INSULATION OF: • CEILING • EXTERNAL WALLS • ELIMINATION OF THERMAL BRIDGES 5. INTERNAL WALLS

21. Isolteco (Isolsan): preparation ISOLTECO (ISOLSAN) THERMAL INSULATING PLASTER + CLEAN WATER ISOLTECO (44 e 440)

22. Isolteco (Isolsan): preparation MIXING (Manual application) MIXING AND PUMPING (mechanical application) HELICOIDAL FULL BLADE 30 LT ROTOR-STATOR CEMENT MIXER PLASTERING MACHINE

23. Readymix: horizontal insulation and lightening

24. Lightweight single layer screed for terraces and balcony Lightweight single layer screed with slope creation Lightweight, thermal insulating underfloor layer Thermal insulation on roof Lightweight thermal insulating single layer for cercamic screed Levelling and lightweight filling for thermal insulation of vaults ceilings Lightweight thermal insulating layer under heating floors Lightweight thermal insulating layer on wood slab Readymix: horizontal insulation and lightening

25. Readymix: horizontal insulation and lightening

26. POLITERM: SUMMARY OF MAIN ADVANTAGES • Using a higher performance material means obtain savings in terms of: • Material consumption • Weight • Space (reduced thickness) • Time • Furthermore, due to its lightness, it contributes to considerably reduce the earthquake effect at the buildings

27. THERMAL INSULATION TECHNOLOGIES We warmly Thank You for your attention Grazie