1 / 19

EXPERIMENT ON MATTER

EXPERIMENT ON MATTER. BY ZAINAB BINTI ARIFFIN 90286. EXPERIMENT. Green principles. Chemical products should be designed so that at the end of their function they do not persist in the environment and breakdown into innocuous degradation product.

suchi
Download Presentation

EXPERIMENT ON MATTER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EXPERIMENT ON MATTER BY ZAINAB BINTI ARIFFIN 90286

  2. EXPERIMENT

  3. Green principles • Chemical products should be designed so that at the end of their function they do not persist in the environment and breakdown into innocuous degradation product. • It is better to prevent waste than treat or clean up waste after it is formed. • Substances used in a chemicals process should be chosen as to minimize the potential chemicals accidents.

  4. objectives • Study the effects of heating and cooling of the pure substance. • Construct heating and cooling curve of pure substance using experimental data. • Determine the freezing and melting point of pure substance.

  5. EQUIPMENT AND MATERIAL

  6. 200 ml water Naphthalene BOILING TUBE-FILLED WITH NAPHTHALENE. 250ML BEAKER-FILLED WITH 200 ML WATER.

  7. BUNSEN BURNER NAPHTHALENE

  8. RETORT STAND TRIPOD STAND

  9. BOILING TUBE HOLDER THERMOMETER

  10. WIRE GAUZE WIRE GAUZE SPATULA WIRE GAUZE

  11. procedure

  12. 1)Fill one third of the boiling tube with Naphthalene. 2)Place the boiling tube in a beaker of water standing on a gauze and tripod stand over a Bunsen Burner.

  13. 3)Heat the water. As the water is heated ,stir the naphthalene. 4) Read and record the temperature every one minute. 5)Repeat steps 3 and 4 until the temperature reaches about 90°C. 6)At every stage,observe and record the state of naphthalene.

  14. 7)Take the boiling tube of liquefied naphthalene out of the hot water and allow it to cool slowly. 8)Read and record the temperature at the interval of one minute till it reaches about 70ºC. 9)At every stage, observe the state of the naphthalene. 10)Using the data, draw graphs: • »The temperature against time for the heating curve of naphthalene. »The temperature against time for cooling curve of naphthalene.

  15. OBSERVATION

  16. Post lab questions

  17. 1)Describe the change in temperature at the initial stage of heating naphthalene • The temperature increase sharply. • Explain. • When the solid is heated, heat energy is absorbed. This causes the particles to gain kinetic energy and vibrate faster. This is why the increased in temperature is observed.

  18. 2)When naphthalene is cooled, describe what happens to: • The temperature? • The temperature decrease. • 2.The state of the naphthalene? • The liquefied naphthalene be in solid state again.

More Related