1 / 20

[LAB 1] Getting Start

[LAB 1] Getting Start. Introduction Getting Start Guiding Materials. BeagleBone Rev A6a . 配件 : Beagle Bone USB OTG cable MicroSD Card MicroSD Card adaptor. BeagleBone Rev A6a . Getting Start. Connect to PC with Windows7. Getting Start. Check Storage device. Getting Start.

suzuki
Download Presentation

[LAB 1] Getting Start

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. [LAB 1] Getting Start • Introduction • Getting Start • Guiding Materials

  2. BeagleBone Rev A6a • 配件: • Beagle Bone • USB OTG cable • MicroSD Card • MicroSD Card adaptor

  3. BeagleBone Rev A6a

  4. Getting Start • Connect to PC with Windows7

  5. Getting Start • Check Storage device

  6. Getting Start • Install thedriver: Bone_DRV or Bone_D64 • It’s going to pop out an error message • Change the language of system to English. • Change back after installed.

  7. Getting Start • Default mode when BeagleBone connect to PC via USB cable is FlashDrive mode. • Switch to Network mode after Driver has been installed by “Eject” function.

  8. Getting Start

  9. Getting Start

  10. Getting Start • Launch Bone101 introduction • Connect to address192.168.7.2:80 • Launch Cloud9 IDE with Chrome or FireFox • Connect to IP address192.168.7.2:3000

  11. Getting Start • Bone101

  12. Getting Start • Cloud9 IDE

  13. Guiding Materials • BeagleBone SystemReference Manual • BeagleBone Schematic • http://beagleboard.org/bone • http://circuitco.com/support

  14. Guiding Materials • BeagleBone System Reference Manual

  15. Guiding Materials • BeagleBone Schematic

  16. Guiding Materials • http://beagleboard.org/bone

  17. Guiding Materials • http://circuitco.com/support

  18. Example 1 • Drive LED onBoardUSR 2、USR 3 • Programming in JavaScript • “require (’Bonescript’)” for including Library in need.

  19. Example 1 • Drive LED onBoardUSR 2、USR 3 • Programming in JavaScript • “require (’Bonescript’)” for including Library in need.

  20. Example 1

More Related