1 / 22

Thermal physics

Thermal physics. What is specific latent heat?????. This is the energy absorbed or released when a substance changes state or phase e.g.) melting or freezing. Specific latent heat of fusion.

talen
Download Presentation

Thermal physics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermalphysics

  2. What is specific latent heat????? This is the energy absorbed or released when a substance changes state or phase e.g.) melting or freezing.

  3. Specific latent heat of fusion • This is the heat required to convert 1kg of a substance at a fixed temperature from the solid to liquid state.

  4. Specific latent heat of vaporization • This is the heat required to convert 1kg of a substance at a fixed temperature from a liquid to gaseous state.

  5. Phase changes • Here particles are rearranged when heat is added or removed from substances. • Example: when heat is supplied to change ice to water or water to water vapor.

  6. PHASE CHANGE DEMONSTRATION • A THERMOMETER IS PLACED IN A BEAKER OF CRUSHED ICE, IT READS O DEGREES UNTIL THE ICE HAS COMPLETELY MELTED.A THERMOMETER PLACED IN BOILING WATER REGISTERS A CONSTANT TEMPERATURE OF 100 DEGREES………………………

  7. The above diagram is a demonstration of the cooling curve of naphthalene. At 80 degrees the temperature remains constant for around nine minutes, at this point in time the naphthalene is changing state. As demonstrated above temperature remains constant during a phase change. Cooling curve

  8. The formula • Both specific latent heat if fusion and specific latent heat of vaporization are measured in J kg(-1). • The formula used is heat supplied or lost during a phase change = mass x specific latent heat E (H)= m x l (f) = m x l (v)

  9. Example mass of water evaporated =19.5g Power rating of the immersion heater=50W Time for which the boiling water was heated=900s Find a value for the specific latent heat of vaporization of water The Heat supplied = power rating x time =50 x 900 =45000J 45000J = mass of water evaporated x l (v) l (v)= ____45000___ x10(2) 1.95 =2.3 x 10(6) J Kg(-1)

  10. Specific latent heat of vaporization using the electrical method • Place a beaker on a top pan balance. • Switch on the immersion heater and bring the water to a boil. • Record the reading on the balance. • Continue heating the water for a fixed time. • Turn off the heater and at the same time take the reading off the balance. • Use the power rating off the heater and the time for which the water was boiling to obtain a value for the heat supplied. • The difference of the two readings of the top pan balance gives the mass of water which turned to vapour. • Calculate a value for the specific latent heat of vaporization of water. • List possible sources of errors in the experiment as carried out.

  11. Differences between evaporation and boiling Boiling Evaporation • Takes place throughout the liquid • Takes place at one fixed temperature • Boiling temperature is not affected by change of surface area • Temperature is increased by increases in external pressure • Takes place at the surface of the liquid • Takes place at all temperatures • Rate increases if surface area increases • Rate decreases if external pressure increases • Rate is increased by increased movement of air over the surface of the liquid

  12. Boiling and Evaporation

  13. Radiation

  14. What is radiation???????? • Nb) radiation takes place at the speed of light and requires neither contact of mass flow. It can take place in a vacuum. • This is the process of heat transfer which does not require a medium. All objects radiate energy continuously in the form of electromagnetic waves. Objects also absorb electromagnetic radiation form their surroundings. An object whose temperature is steady is radiating and absorbing radiation at the same time.

  15. The transfer of thermal energy by radiation continued • The radiation falling on an object may be partly reflected and partly absorbed . The absorbed radiation is converted to heat.

  16. The greenhouse effect • The increasing use of fossil fuels have caused a rise in the amount of carbon dioxide in the atmosphere. Neither carbon dioxide nor water vapour prevents the energy from the sun from reaching the surface of the earth. However, the radiant energy given off from the earth has a different wavelength and is absorbed by both the carbon dioxide and the water vapour. The absorption of the radiant energy causes the carbon dioxide molecules to vibrate and heat up. The heat so produced is reflected back to the earth which then heats up.

  17. A vacuum flask • A vacuum flask is designed to reduce heat loses by convection, conduction and radiation. The flask contains a double-walled glass vessel with a vacuum between the walls. • the silvering on the inner surfaces of the double wall reduces loss of heat by radiation. • The top and the support at the base are made of insulating materials. These reduce, but do not entirely cut out loss of heat by conduction. The flask hot liquids hot and cold liquids cold.

  18. Picture of vacuum flask

  19. The solar cooker • The solar cooker is a curved reflector with a highly polished surface: it collects the sun’s rays and focuses them at a point. The pot or dish should be placed here.

  20. Absorbers and Emitters Good absorbers of radiant energy (black and rough surfaces) are also good emitters of radiant energy.

  21. The end!!!!!!!!! *wink wink*

More Related