1 / 8

Facing for Unfaced Batts

Facing for Unfaced Batts. Facing for Unfaced Batts. Where will I see applications of Facing for Unfaced Batts , requiring Class A (Flame Spread of 25 or less) ratings? Educational, Retail, Office…other Commercial Buildings; in Plenum Area and wall applications.

tanek
Download Presentation

Facing for Unfaced Batts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Facing for UnfacedBatts

  2. Facing for Unfaced Batts Where will I see applications of Facing for Unfaced Batts, requiring Class A (Flame Spread of 25 or less) ratings? Educational, Retail, Office…other Commercial Buildings; in Plenum Area and wall applications. What is the typical solution provided by Architects? FSK-faced Batts

  3. What is FSK Shield Insulation Facing? Unfaced fiberglass and Fi-Foil’s FSK Shield™ is lower cost and more readily available than FSK-faced Batts FSK stands for Foil Scrim Kraft or aluminum foil bonded to kraft paper with a flame retardant adhesive and reinforced with fiberglass scrim.

  4. When and where is it used? • FSK Shield was tested with R11, R19, and R30 unfaced batts in accordance with ASTM E-84. • Primarily to provide a lower-cost alternative to FSK-faced batts, as well as, meet Class A (Flame Spread of 25 or less) requirements in ceiling and wall applications. • It is also used to insure that unfaced fiberglass batt insulation is fully aligned with the air barrier or drywall. FACING FOR UNFACED BATTS WALL APPLICATION

  5. When you substitute FSK Shield + UnfacedBatts, for FSK-faced Batts… Save MONEY and TIME TOTAL COST SAVINGS = 22%* *Note: Example is based on Retail Pricing for all products.

  6. Can be used as an effective vapor retarder. All seams should be taped with Fi-Foil’s FSK Tape. Another Benefit: VAPOR RETARDER ASTM E-96 Water Vapor Permeance of 0.02 Building Standard in:

  7. Thermal Performance • The Low Emittance High Reflective surface facing an Air Film adds R-value to the insulation system • Ceilings:R- 4.6 • Walls:R- 1.7 • Reference: Surface Conductances and Resistances for Air, ASHRAE FundamentalsHandbook.

  8. Another Solution: PLENUM AREA APPLICATION FSK Shield™ can be installed in the Plenum Areaas FACING FOR UNFACED BATTS or as a facing for Fi-Foil’s Masonry Wall insulation - AA2 Vapor Shield, to achieve a Class A rating. A Plenum Area is often the air return for an air conditioning system. In some buildings, the area above a drop ceiling is used as the air return (source of air) for the air conditioning.

More Related