1 / 15

DRAFT

DRAFT. Major Tool Data Set 65678-1 FULL VESSEL PORT12 AND NB FOR PPPL.xls Model smc121-vv-insp-data.asm stored in intralink. DRAFT. ORIENTATION. Top Vertical port. Right Flange. Left flange. Bottom Vertical Port. DRAF. DRAFT. Positive Distance from Outside Surface of Vacuum Vessel. .314.

taryn
Download Presentation

DRAFT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DRAFT Major Tool Data Set65678-1 FULL VESSEL PORT12 AND NB FOR PPPL.xlsModel smc121-vv-insp-data.asm stored in intralink DRAFT

  2. ORIENTATION Top Vertical port Right Flange Left flange Bottom Vertical Port DRAF DRAFT

  3. Positive Distance from Outside Surface of Vacuum Vessel .314 .274 Majority of points in the range of .180 to .200 .180 to.200 Majority of points in the range of .180 to .200 .239 falling off to .1875 .228 DRAFT

  4. Positive Distance from Outside Surface of Vacuum Vessel .350 to .300 Additional points in the range of .200 to .275 .388 to .486 .350 to .400 Areas outside those indicated range from .187 near edge to .250 closer to high spots DRAFT

  5. Positive Distance from Outside Surface of Vacuum Vessel Points outside indicated area are approximately .250 .300 to .350 Bottom Vertical Port DRAFT

  6. Positive Distance from Outside Surface of Vacuum Vessel .405 .391 Top Vertical Port .390 .300 to .350 .215 DRAFT

  7. Positive Distance from Outside Surface of Vacuum Vessel .365 .405 .210 DRAFT

  8. Positive Distance from Outside Surface of Vacuum Vessel .200 to .225 DRAFT

  9. Negative Distance to Outside Surface of Vacuum Vessel DRAFT Right flange Bottom Half of Vessel Left flange ~.300 .191 .325 to .383 .250 to .300

  10. Negative Distance to Outside Surface of Vacuum Vessel Right flange .278 .200 Left flange .307 Bottom Half of Vessel .195 .220 .305 .250 to .300 DRAFT

  11. Negative Distance to Outside Surface of Vacuum Vessel Bottom Half of Vessel Right flange .200 .190 .244 .230 Left flange .281 .200 DRAFT

  12. Negative Distance to Outside Surface of Vacuum Vessel Right flange Top Half of Vessel Left flange .396 .339 .300 .193 DRAFT

  13. Negative Distance to Outside Surface of Vacuum Vessel Right flange Top Half of Vessel .333 .392 Left flange .200 .200 .312 .250 DRAFT

  14. Left Side Flange DRAFT

  15. Right Side Flange DRAFT

More Related