* Charge sensors completely (couple of hours) * Do not recharge until charge is low

1. Using sensors for the first few times * Charge sensors completely (couple of hours) * Do not recharge until charge is low

2. After using the sensors a few times * Sensors do not have to be fully charged (15 minutes enough for a few trials) * When fully charged, sensors can function for 3-4 h When not connected, sensors will shut off after 5-30 min to save battery charge

5. 3M Dual Lock tape to hold the sensor Velcro straps Pocket for the gyroscope

6. To attach the head sensor 1- Place the head bumper

7. To attach the head sensor 2- Attach the sensor to the 3M Dual Lock tape

8. Alternative for the head bumper Attach the sensor to the halter

10. To attach the pelvic sensor 1- Make the horse stand squarely find dorsal midline check for pelvic symmetry

11. To attach the pelvic sensor 2- Locate the dorsal spinal processes

12. To attach the pelvic sensor 3- Attach a piece of 3M Dual Lock tape over the sacral tuberosities

13. To attach the pelvic sensor 4- Attach the sensor to the 3M Dual Lock tape

14. To attach the pelvic sensor 5- Cover the sensor with tape

15. To attach the sensor to the right front limb 1- Attach the pastern wrap

16. How to attach the sensor to the right front limb 2- Attach the sensor to the pastern wrap

17. How to attach the sensor to the right front limb 3- Cover half of the wrap with an elastic adhesive tape

18. Long range Bluetooth receiver

19. Ready to collect data