680 likes | 778 Views
The Role of Drug Names and Packaging in Medication Errors. Learning Objectives. Describe potential errors caused by confusing look-alike or sound-alike (LASA) drug products Explain ways to decrease the potential for LASA medication errors
E N D
Learning Objectives • Describe potential errors caused by confusing look-alike or sound-alike (LASA) drug products • Explain ways to decrease the potential for LASA medication errors • Discuss the role of practitioners in decreasing LASA medication errors
Magnitude of the Problem • The Institute for Safe Medication Practices (ISMP) has reported over 1,000 drug pairs of confusing drug names • Confusion related to product names is one of the most common causes of errors reported to the U.S. Pharmacopeia (USP), Food and Drug Administration (FDA), and ISMP Institute for Safe Medication Practices. http://www.ismp.org/Tools/confuseddrugnames.pdf. Starr CH. Drug Topics. May 15, 2000;144(10):49–58.
Examples of Errors Reported to ISMP • Daptomycin and Dactinomycin • Generic names are similar, both are once daily administration, both are lyophilized powders, both are yellowish in color • Error detected prior to reaching patient attributable to differences in dosing • Purinethol and Propylthiouracil • A child missed 6 months of chemotherapy because propylthiouracil, an antithyroid drug, was dispensed instead of purinethol
Name Changes • Levoxine and Lanoxin • Similar brand names, both are tablet forms, both available as 0.125 mg tablets, both once daily administration • Losec (omeprazole) and Lasix • Similar brand names, both dosed at 20 mg, names look similar when written in cursive • After reports of errors arose, FDA and ISMP advocated name changes • Levoxine changed to Levoxyl • Losec changed to Prilosec
Use of TALL-Man Letters • Use of mixed-case or enlarged letters to emphasize the differing portions of two drug names: zyPREXA zyRTEC hydrOXYzine hydrALAZINE DOBUTamine DOPamine • Use required by the FDA in 16 generic name pairs • For complete list, see Table 6-1 in textbook • For examples of name pairs on product labels, see Figures 6-2 and 6-3 in textbook
Lists of Similar Name Pairs • Limitations of some lists • Too long for practitioners to remember • Confirmation bias • Some name pairs may be on the list because of packaging, not name • No way to distinguish between pairs with frequent reports of confusion versus pairs with a single report
Lists of Similar Name Pairs • Overcoming limitations • The Joint Commission and ISMP compiled three smaller lists • Reviewed by an expert panel • Each pair includes recommendations to prevent confusion within that specific pair • For potentially problematic name pairs encountered in inpatient and outpatient care settings, see Tables 6-2, 6-3, and 6-4 in textbook
Lists of Similar Name Pairs • Overcoming limitations • To comply with The Joint Commission 2009 standards for hospitals, organizations must: • Choose at least 10 pairs of LASA medications from LASA tables listed on The Joint Commission Web site http://www.jointcommission.org • Annually review the organization’s list of LASA medications and take actions
Generic Name Selection • The World Health Organization (WHO) International Nonproprietary Names (INN) committee • Advocates for worldwide names • The U.S. Adopted Names (USAN) Council assigns generic names in the United States • Multidisciplinary group • WHO INN designates first, then USAN
Generic Name Mix-Ups • 9 of 10 pairs of potentially problematic names on the The Joint Commission list include generic names • The Joint Commission and ISMP encourage the use of both generic and brand name • Avoids confusion • Adds to redundancy • Inclusion of “indication for use” can further decrease confusion • Most LASA products have different uses
Look-Alike and Sound-Alike Drug Choices For additional LASA name pairs, see Tables 6-2 and 6-3 in textbook
Trademark Suffixes • FDA requires each new formulation of a drug to be distinguished by a suffix • Inconsistent use of suffixes may cause errors • Example • Wellbutrin SR (sustained release) is given twice daily, Dilatrate SR is once daily, Wellbutrin XL is once daily • Misinterpretation of brand name suffixes may result in errors • Examples • Percocet-5 to designate Percocet 5 mg, misinterpreted as Percocet 5 tablets
Ad Hoc Abbreviations • Avoid the use of abbreviations • Interpretation of abbreviations • Varies person-to-person • May be dependent on handwriting • Leads to confusion and errors • Examples • “Norflox” for norfloxacin mistaken for Norflex • “HCT” for hydrocortisone mistaken for hydrochlorothiazide • “Adria” for Adriamycin mistaken for Aredia
Nonprescription Brand-Name Line Extensions • Federal regulations do not prevent nonprescription drugs from being marketed without FDA approval of product names • Companies can capitalize on a well-known and trusted brand name • Product may not include any of the active ingredients of the original branded product • Product may even be used for an opposing indication • ISMP opposes brand name extension unless at least one ingredient from original product is present in the new product
Brand-Name Extensions Original Kaopectate formulation: antidiarrheal A newer Kaopectate formulation: contains docusate, thus it is a stool softener Same brand name for opposing indications
Foreign Drug Names and Impact of Reimportation • No clearinghouse for worldwide brand names • Depending on the country: • Same brand names may have different active ingredients in the United States versus foreign countries • For examples of U.S. brand names with different active ingredients in Europe, see Table 6-5 in the textbook • Suffixes are not standardized worldwide
Foreign Drug Names and Impact of Reimportation • Increasing problem attributable to: • Internet pharmacies • Reimportation of less expensive medications • Instruct patients traveling abroad to keep a list of medications by generic and brand name
U.S. Brand Names With Different Ingredients in Europe For additional U.S. brand names with different active ingredients abroad, see Table 6-5 in textbook
Role of the FDA • Premarketing review of proposed trademarks • Postmarketing surveillance and risk management
Premarketing Review of Proposed Trademarks FDA Office of Drug Safety, Division of Medication Errors and Technical Support (DMETS) reviews all trademarks
Premarketing Review of Proposed Trademarks • DMETS has recommended disapproval of trademarks for the following reasons: • Names are too similar to existing names • Misleading, incorrect, or unsafe elements • Claims not supported by clinical data • Prefixes and suffixes may be confused with a common medical abbreviation • Inclusion of dosage form or regimen in the proprietary name • Similarities in storage environment • Unacceptable similarity between generic and brand names
Postmarketing Surveillance and Risk Management • Phase IV Medication Error Monitoring Program • Part of an NDA approval letter • Similar to a probationary period • Gives FDA and manufacturers time to determine if a theoretical risk materializes into a true risk
Role of the Pharmaceutical Industry • Trademarks must: • Be free of bad meanings or connotations • Be relatively easy to pronounce • Not add to medication errors • Not infringe upon other products • Undergo considerable scrutiny • Linguistics algorithms • Cultural checks • Searches for similar names • Market studies with providers and consumers • Analyses of potential errors
Role of Prescribers • Maintain awareness of LASA drug names • Clearly specify dosage form, drug strength, and complete directions on prescriptions • Use both brand and generic names when writing a prescription • Include the purpose of the medication in the prescription • Alert patients to the potential for mix-ups • Encourage patients to ask nurses or pharmacists about unfamiliar medications they may be given • Avoid verbal orders; if used, require staff receiving order to read back the order
Role of Practitioners and Organizations • Determine purpose of medication prior to dispensing • Limit verbal orders; require read back of the transcribed order (not “repeat back” of the spoken order) • Consider confusion potential when a medication is added to the formulary • Computerize prescribing; if not, use pre-printed orders • List brand and generic names on medication administration records and in automated dispensing cabinet (ADC) screens • Use independent double checks
Role of Practitioners and Organizations • Change appearance of LASA drugs on computer screens, ADCs, bins, carts, and labels by using TALL-man lettering, highlighting, color, or boldface • Install and use computerized alerts • Configure computer screens to prevent LASA drugs from appearing consecutively • Affix name alert stickers • Do not store LASA drug pairs together • Separate drug products in pharmacy, nursing units, OR, etc. • Encourage reporting of errors and potentially hazardous conditions (near misses)
Human factors Confirmation bias Look-alike packaging Readability Color Two-sided labels Lack of contrast Blister strips Expression of: Concentration Strength Company name, logo Product expiration dates Typeface Excessive use of warnings Use of symbols Nonstandard terminology Unsafe abbreviations Bar codes Container design Protective overwraps External carton labels Promotional materials Drug shortages Factors Affecting Packaging and Labeling Errors
Information in an inconspicuous place Ambiguous presentation Information overshadowed by less important information Stylized graphics Positioning of corporate logos Print of suboptimal: Size Boldness Contrast Labels read in less than ideal conditions: Low light Stressful situations Label-Specific Factors Contributing to Errors
Human Factors • Human and environmental factors play a major role in medication safety • Simple modifications enhance readability: • Optimize lighting (significant reduction of errors at 146 footcandles versus 102 footcandles of light) • Using magnifying lenses • Printing information in exaggerated fonts • Regular eye exams • Rearranging work stations
Confirmation Bias • Definition: seeing or hearing what is familiar or what a person wants to see or hear, rather than what is actually there • Factors adding to confirmation bias • Similar packaging • Difficult to read labeling • Similar shape and size • Similar color • Stored in the same location • For example of overcoming confirmation bias, see Figure 7-2 in the color photographs section of textbook
PARIS IN THE THE SPRING
Examples of Look-Alike Packaging • These ampuls are two different products • External cartons are different • Internal amber packaging makes them difficult to distinguish • Small writing and identical colored ampul neck rings add to confusion
Look-Alike Packaging • CDC reported 100 patients in 21 states received tetanus toxoid instead of purified protein derivative for tuberculin skin testing (PPD) during 2004 • Owing to look-alike packaging, tetanus toxoid was administered by the wrong route: • Administered intradermally versus intramuscularly • Packaging was very colorful with stylized logos and writing • Practitioners distracted by color and style • Did not stop and read • Manufacturer changed packaging to reduce confusion • For examples of look-alike packaging, see Figures 18-4 and 18-5 in textbook Centers for Disease Control and Prevention. MMWR. 2004;53(29):662–4.
Readability of Labels and Packages • Items may be correctly labeled, but if label is too cluttered it cannot be easily read (Figures 7-4 and 7-5) • Leads to confirmation bias • Bias compounded if containers stored in same location, or stocked incorrectly • Common source of this type of error, IV stock solutions (Figures 7-6 and 7-7) • Same volume sizes often stored together • Packaging is typically identical • Little variation in text color • Excessive writing on the bag because it serves as its own “container”
ISMP Recommended Hierarchy of Information on Front Panel of Prescription Drug Labels Brand name—bold, sans serif type Consider TALL-man lettering Generic name Dosage form Strength (metric units) Suggested route Warnings (if no space, note where information can be found) If injectable, note whether single-use, multi-dose, etc. Manufacturer, distributor, packager information Never place at top of container because logos can be distracting and are not considered necessary for dispensing “Rx only” statement and other federal requirements
Uses of Color • Color coding: systematically applying color to aid in classification and identification • Relies on remembering what each color means • Example: ophthalmic preparations, color identifies drug category • Color differentiation: color used to make elements stand out or distinguish between items • Concern that practitioners may rely only on color and not read labels • Example: pediatric formulation packaged in light blue, adult version in orange
Uses of Color • Color matching: colors have no special meaning, used to match one item to another • Example: a blue plug attaches to a blue receptacle • Example: Broselow tape for pediatric emergencies • For photograph of Broselow tape, see Figure 7-9 in textbook
Uses of Color • Color coding
Problems With Uses of Color • Should not distract from drug name and strength • Use color coding with caution • Slight color changes may be difficult to discern • Colorblind employees • American Society of Health-System Pharmacists (ASHP), ISMP, and FDA oppose the use of color alone to identify drug products • No single variable should be relied upon to prevent errors, including color
Problems With Uses of Color • Problem extends beyond medication packaging • Syringe and needle packages also problematic • Overdoses have resulted • For example of syringe packaging, see Figure 7-12 in textbook • Possibly included in department specific procedures • Anesthesia • Labels indicate a drug category, not a specific drug • For examples of color-code scheme, see Table 7-2 in textbook • User must add drug name and dose to avoid confusing the end products
Need for Two-Sided Labeling • Most common with IV fluids or piggyback medications • Problem • Premixed IV bags look identical to one another when stored face down • Foil overwraps have the same risk associated with them • For examples of front and back package labeling, see Figures 7-13 and 7-14 in textbook
Contrast • Examples of difficulty achieving contrast • Printing on glass ampuls (Figure 7-15) • Labeling on aluminum foil–wrapped packaging • Glare off packaging affects readability • Small package sizes do not allow room for contrast (Figure 7-16) • Labeling on low-density polyethylene (LDPE) plastic ampuls for respiratory therapy medications (Figure 13-3) • Writing is embossed in transparent, raised lettering • Virtually impossible to read • Exempt from FDA bar coding rules • New IV formulations and eye drops are available in LDPE containers, leading to wrong route errors as a result of packaging
Contrast • American Society for Testing and Materials standards requires: • Contrast between drug names and amount of drug per unit • Legibility testing requiring • Prevention of errors with LDPE • Allow only pharmacy to order and stock respiratory medications from wholesaler • Manufacturers should ship products in well-marked boxes • Dispense ampuls in an outer package that can be easily labeled • Do not store different respiratory medications in the same bin
Expressions of Concentration and Strength • Way in which strength is denoted may be confusing • Total volume displayed in small type size • Total volume and concentration not displayed near each other • Expressions in concentration and ratios versus dose can cause confusion • Example: epinephrine 1:1,000 versus 1:10,000 • Unit-dose packages labeled as amount per tablet versus amount per package
Expressions of Concentration and Strength • Errors have involved entire volumes of a vial injected instead of the correct dose • Example: gentamicin 40 mg/mL supplied in a 20 mL vial • Correct dose is 40 mg (i.e., 1 mL) • Error: full 20 mL injected mistaking the need for entire vial to be used for the dose • For photograph of package labeling, see Figure 7-17 in textbook
Labeling of Blister Strips • Nonprescription medications • Product name and strength may appear in a random pattern across strip • Blisters may be cut and separated by patients or for use in institutions • Leaves medication with no label