draft-ietf-ancp-framework-04.txt Presenter: Stefaan De Cnodder

1. Framework & Requirementsfor an Access Node Control Mechanism in Broadband Multi-Service NetworksANCP WGIETF 70 – Vancouver draft-ietf-ancp-framework-04.txt Presenter: Stefaan De Cnodder

2. History • Jan 2006: draft-ooghe-l2cp-framework-00.txt submitted for L2CP BOF • May 2006: draft-ooghe-ancp-framework-00.txt • November 2006: draft-ietf-ancp-framework-00.txt • March 2007: draft-ietf-ancp-framework-01.txt • July 2007: draft-ietf-ancp-framework-02.txt • October 2007: draft-ietf-ancp-framework-03.txt • November 2007: draft-ietf-ancp-framework-04.txt • => 2 re-submissions since last IETF meeting

3. Main Updates in v03 and v04 • Updates in draft-ietf-ancp-framework-03.txt • multicast • use case worked out per IETF discussion • Added corresponding Access Node and NAS requirements • Added multicast related security considerations • bonding • addition of a notification to inform NAS about configuration changes made by EMS, only applicable for use case “Access Loop Configuration” • Updates in draft-ietf-ancp-framework-04.txt • Small terminology consistency change (“net data rate”)

4. New Sections • Section 3. Use Cases for Access Node Control Mechanism • 3.4. Multicast • 3.4.1. Multicast Conditional Access • 3.4.2. Multicast Admission Control • 3.4.3. Multicast Accounting • 3.4.4. Multicast Termination [but this title has to be changed] • Section 4. Requirements • 4.2. ANCP Multicast Requirements • 4.3. ANCP Security Requirements • 4.7. Access Node Requirements • 4.7.6. Multicast • 4.8. Network Access Server Requirements • 4.8.6. Multicast • also updates in section 1.2. “Definitions” with some new multicast related definitions

5. Reference Architecture +--------+ | Policy | | Server | +--------+ | | +-----+ +-----+ +--------+ +-----+ +----------+ | CPE |---| HGW |---| | | | | | +-----+ +-----+ | Access | +---------+ | | | Regional | | Node |---| Aggreg. |---| NAS |---| Network | +-----+ +-----+ | | | Node | | | | | | CPE |---| HGW |---| | +---------+ | | | | +-----+ +-----+ +--------+ +-----+ +----------+ Information Report / Admission Request --------------------------> Admission Response / Control Request <-------------------------- Control Response --------------------------> Access Node Control Mechanism <-------------------------> PPP, DHCP, IP <---------><-------------------------------------> + Updated the description of all components accordingly to include multicast and bonding

6. Use Case – Multicast (1/2) • Conditional Access • dynamically control, at the network level, access to some multicast flows on a per user basis • Option 1: AN decides based on pre-provisioned access information • “push model”: Control Request / Control Response • Option 2: AN queries the NAS for a particular multicast flow or for a group of flows • “pull model”: Admission Request / Admission Response • Admission Control • Option 1: AN queries the NAS for CAC decision • “pull model”: Admission Request / Admission Response • Option 2: Policy Server queries the AN (ANCP not required)

7. Use Case – Multicast (2/2) • Accounting • Option 1: AN keeps track of when replication starts or stops, generates the time and/or volume accounting information and sends it to a central accounting system (no ANCP required) • Option 2: AN keeps track of when replication starts or stops and reports this to the NAS for further processing • Information Report • Termination • NAS can dynamically stop the replication of a multicast flow • NAS sends “Admission Response” to AN to terminate replication

8. Next Steps • All comments closed? • conditional access • in current draft, default behavior is querying the NAS • this has to be changed into one of the following: • discard Join • treat multicast flow as best effort • make it mandatory to configure a “catch-all” entry in one of the lists • terminology update: grey list • these updates are pending, to be done in v05 • after these updates are done, ready for WG LC?

9. Backup

10. Terminology • Line Rate • total data rate including overhead • Net Data Rate • portion of the total data rate that can be used to transmit user information (e.g. ATM cells or Ethernet frames). It excludes overhead that pertains to the physical transmission mechanism (e.g. trellis coding in case of DSL) • Control Channel • a bidirectional IP communication interface between the controller function (in the NAS) and the reporting/enforcement function (in the AN) • Access Node Control Adjacency • relationship between an Access Node and a NAS for the purpose of exchanging ANCP messages. The adjacency may either be up or down, depending on the result of the Access Node Control Adjacency protocol operation. • Multicast flow • multicast Any Source Multicast group or multicast Source Specific Multicast (S,G) channel

11. Use Case - Dynamic Access Loop Attributes • Communicating Access Loop attributes • Beneficial since the Access Loop rate may change overtime • NAS gains knowledge about the topology of the access network (e.g. for QoS scheduling)

12. Use Case - Access Loop Configuration • Change Access Loop parameters (e.g. rate) from the NAS • Avoids cross-organization business-to-business interactions • Allows to centralize Subscriber-related service data in e.g. a policy server • The best way to change Access Loop parameters is by using profiles • pre-configured on the Access Node using EMS • Mechanism could be used for additional parameters (e.g. QoS)

13. Use Case – Remote Connectivity Test • NAS can use ANCP to initiate an Access Loop test between Access Node and HGW • Allows mixed ATM/Ethernet environment • Supports multiple Access Loop technologies (e.g. ATM/ADSL, Ethernet/VDSL) • Preserve existing operational functionality

14. Access Node requirements • General Architecture • Partitioning • Redundant controllers • Control Channel Attributes • Capability Negotiation Failure • Adjacency Status Reporting • Adjacency protocol • Identification • In line with TR-101 (e.g. Access-Node-Identifier atm slot/port:vpi.vci) • The AN MUST use the same ACI format for identifying the AN and access port in ANCP, PPPoE and DHCP messages • Multicast • Message Handling • Parameter Control • Damping • Bundling • Security

15. Network Access Server requirements • General Architecture • Partitioning • Shaping based on Dynamic Access Loop Attributes • Access Loop Configuration • Remote Connectivity Test • Control Channel Attributes • Capability Negotiation Failure • Adjacency Status Reporting • Identification • In line with TR-101 (e.g. Access-Node-Identifier atm slot/port:vpi.vci) • Multicast • Message Handling • Wholesale Model • Communicate Access Loop Attributes to an LNS • Security