1 / 9

Defining 10GBASE-S over OM4media (Engineered Link)

Defining 10GBASE-S over OM4media (Engineered Link). Steve Swanson, Corning Adrian Amezcua, Draka. Supporters. John Abbott, Corning Gerard Kuyt, Draka James Lott, VIS Systems Paul Kolesar, Commscope Sharon Lutz, USConec Rick Pimpinella, Panduit Valerie Maguire, Siemon Robert Lingle, OFS

tejana
Download Presentation

Defining 10GBASE-S over OM4media (Engineered Link)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Defining 10GBASE-S over OM4media (Engineered Link) Steve Swanson, Corning Adrian Amezcua, Draka

  2. Supporters • John Abbott, Corning • Gerard Kuyt, Draka • James Lott, VIS Systems • Paul Kolesar, Commscope • Sharon Lutz, USConec • Rick Pimpinella, Panduit • Valerie Maguire, Siemon • Robert Lingle, OFS • Paul Vanderlaan, Nexans

  3. CISCO proposal

  4. Corning-Draka proposal • Define an Engineered Link in Table 52-6 4700 2 to 400 4700 2 to 500 (1) • (1) Links longer than 400m are considered engineered links. The cable attenuation and connector allocation needs to be less than that specified in IS 11801. In addition, the maximum spectral width of the VCSEL is a subset of that specified in this standard. For example, with a cable attenuation of 3.0 dB/km, a connector allocation of 1.0 dB and a maximum spectral width of 0.30nm, a 500m link length is supported.

  5. -2.8 -3.8 VCSEL characteristics CISCO proposal considers worst case sources 500m reach is possible with a subset of sources.

  6. Reducing cable and connectorization loss By reducing the cable attenuation to 3.0dB/km and connector loss to 1.0dB, the margin increases 0.70dB. This extra margin can be used to extend the reach CISCO proposal 3.5dB/km cable attenuation, 1.5dB connector loss.

  7. 10GbE reach on OM3 & OM4 System Margins with OM3 Connector loss = 1.5dB Fiber Attenuation = 3.5dB/km EMB = 2,000MHz-km System Margins with OM4 Connector loss = 1.0dB Fiber Attenuation = 3.0dB/km EMB = 4,700MHz-km System margin calculations based on IEEE spreadsheet model show that chromatic dispersion ultimately limits the reach of 10GbE on OM4 7

  8. System Budget with narrow sources (1) • These calculations are based on central wavelength at 840nm (worst case scenario). The central wavelength of most sources is close to 850nm and at this wavelength the BW of the fiber is >4700MHz.km. Reach up to 500m is feasible

  9. System Budget with narrow sources (2)

More Related