1 / 14

Wireless Measurement System for Environmental Monitoring and Control

Wireless Measurement System for Environmental Monitoring and Control. M M. Srbinovska , V. Dimcev , C . Gavrovski Ss Cyril and Methodius University, Skopje, Macedonia Faculty of Electrical Engineering and Information Technologies - Skopje. Outline. Introduction

tekli
Download Presentation

Wireless Measurement System for Environmental Monitoring and Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Measurement System for Environmental Monitoring and Control MM.Srbinovska, V.Dimcev, C. Gavrovski Ss Cyril and Methodius University, Skopje, Macedonia Faculty of Electrical Engineering and Information Technologies - Skopje

  2. Outline • Introduction • Wireless sensor networks –application • Humidity • Temperature • Light • Experimental results • Conclusions

  3. The architecture of wireless sensor networks (WSN) consists of spatially distributed embedded devices, called sensor nodes, which form multi-hop mesh network and measure the parameters of interest within the application. These sensors are small, with limited processing and computing resources, and they are inexpensive compared to traditional sensors. Introduction

  4. Precision agriculture is a new modern solution in traditional agriculture. The monitored data is used to derive the most suitable decision which can help in control and adjustment of environmental parameters for obtaining better production yield. First monitoring parameters such as temperature, humidity and illumination, as these parameters are the main factors that influence the product yield and quality. The control and management decision is based on the analysis of the monitored data. Finally, automatic or manual control mechanism is implemented to complete the required environmental control and adjustment.

  5. Measurement parameters: temperature, humidity, pressure, light and acceleration. • Measurement data obtained from the sensor nodes are wirelessly transmitted to a central base station for data collection. The base station makes a decision according to which the nodes perform appropriate task. • Indoor measurements in Laboratory of Electrical measurement.

  6. Measurement system consists of 6 Micaz nodes which communicate to one MIB520 USB gateway connected to the PC. The nodes consist of XM2110 radio/ processing modules with MTS400 sensor boards and are battery powered from 2 x AA batteries Sensor node placement

  7. Experimental results • Measurement of the following parameters: • Humidity; • Temperature; • Light. • The application for monitoring and control of the environmental parameters using wireless sensor nodes is developed using Labview software.

  8. Block diagram of the measurement system

  9. Measurement system which is monitoring the environmental parameters measuring temperature, humidity and light is presented. Analysis and processing of collected measuring data using Labview software are presented. Graphical user interface in Labview is used for presenting the measurement results as a function of time Conclusions

  10. Thank you for your attention!

More Related