Everything That You Need to Know about electrolytic capacitors Thailand

1. Electrolytic capacitors Thailand are one of the most popular types of electronic components that are used widely while building the circuit of the appliances. The name of the capacitor has been generated because of the dielectric. As these capacitors have a specific positive and negative end, they are often known as the polarized capacitors. From this list can be easily derived that the capacitors should be corrected in this way only. If you do not connect the polarized ends of the capacitor in the right way, it can lead to defects, malfunctions, abnormality and what not. In some cases, it can even ruin the circuit for good. To make sure that does not happen to your circuit, you should understand the electrolytic capacitors very well before taking any steps. It would help you to understand different aspects of the capacitor and use it properly. Properties of Electrolytic Capacitors Capacitance Drift overtime capacitance levels of the electrolytic capacitors change from the minimum value. Also, these capacitors come with a huge tolerance. The tolerance levels of the capacitors largely stay about 20% range. While the tantalum capacitors can have even higher tolerance levels, their operating voltage capacity cannot be as high as the electrolytic ones. That is one of the reasons why you can not use the tantalum capacitors as a direct replacement of the electrolytic ones. Polarity and Safety Thanks to the construction technique of these capacitors and the features of the electrolytes used, these capacitors are almost always forward biased. In simple terms, you should always put the positive terminal of the capacitor at a higher voltage level compared to the negative terminal.

2. Dielectric constant Similar to ceramic capacitors, the electrolytic capacitors have high dielectric constant. That is one of the reasons why these capacitors provide a higher capacitance value to the circuit. Temperature Limitations The dielectric of the capacitors contains an electrolytic jelly inside of it. That is one of the reasons why you cannot use the electrolytic capacitors below or above a certain temperature. A temperature lower than -49 degree centigrade would freeze the jelly and high temperature (+105 C) would evaporate it. Cost as the electrolytic capacitors have a very low manufacturing cost, their retail value is not that high as well. Size availability These capacitors are available in different sizes. You can choose the size of the capacitor depending on the size and the requirements of the circuit. Compared to the ceramic capacitors, the installation space does not create any issue for these capacitors. Reliability These capacitors are quite reliable and can be considered as one of the most popular components in the capacitor family. The capacitors possess high tolerance value. It helps the capacitors to function efficiently or a longer period if you install the capacitor according to its polarization requirements. The above properties of the electrolytic capacitors come in handy when you are dealing with one. If you keep all these factors in mind while installing the capacitor in the circuit, you would be able to install it correctly. That would help you to get the maximum benefits out of these components in the long run.