1 / 12

RECALL LECTURE 9

RECALL LECTURE 9. Introduction to BJT 3 modes of operation Cut-off Active Saturation Active mode operation of NPN. NPN. PNP. I E = I S [ e VBE / VT ]. I E = I S [ e VEB / VT ]. I C =  I B. I C =  I E. I E = I B (  + 1).  = [  / 1 -  ].  = [  /  + 1 ].

thais
Download Presentation

RECALL LECTURE 9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RECALL LECTURE 9 • Introduction to BJT • 3 modes of operation • Cut-off • Active • Saturation • Active mode operation of NPN

  2. NPN PNP IE = IS [ e VBE / VT ] IE = IS [ e VEB/ VT] IC = IB IC = IE IE = IB(+ 1)  = [/ 1 - ]  = [ / + 1 ] Based on KCL: IE = IC + IB

  3. DC Analysis of BJT Circuit

  4. DC analysis of BJT • BE Loop (EB Loop) – VBE for npn and VEB for pnp • CE Loop (EC Loop) - VCE for npn and VEC for pnp • When node voltages are known, branch current equations can be used.

  5. Common-Emitter Circuit • The figures below is showing a common-emitter circuit with an npn transistor and the dc equivalent circuit. • Assume that the B-E junction is forward biased, so the voltage drop across that junction is the cut-in or turn-on voltage VBE (on). Unless given , always assume VBE = 0.7V

  6. Common-Emitter Circuit • The base current: KVL at B-E loop • Implicitly assuming that VBB > VBE (on), which means that IB > 0. When VBB < VBE (on), the transistor is cut off and IB = 0.

  7. Common-Emitter Circuit • In the C-E loop of the circuit, we can use: and • Implicitly assuming that the transistor is biased in the forward-active mode.

  8. Examples BJT DC Analysis

  9. Common-Emitter Circuit Example Calculate the base, collector and emitter currents and the C-E voltage for a common-emitter circuit by considering VBB = 4 V, RB = 220kΩ, RC = 2 kΩ, VCC = 10 V, VBE (on) = 0.7 V andβ = 200.

  10. BJT Circuits at DC  = 0.99 KVL at BE loop: 0.7 + IERE – 4 = 0 IE = 3.3 / 3.3 = 1 mA Hence, IC =  IE= 0.99 mA IB = IE – IC = 0.01 mA KVL at CE loop: ICRC + VCE + IERE – 10 = 0 VCE = 10 – 3.3 – 4.653 = 2.047 V

  11. Common-Emitter Circuit - PNP Example Find IB, IC, IE and RC such that VEC = ½ VCC for a common-emitter circuit. Consider: VBB = 1.5 V, RB = 580 Ω, VCC = 5 V, VEB (on) = 0.6 V, β = 100.

  12. IE EXAMPLE Given  = 75 and VEC = 6V. Find the values of the labelled parameters, RC and IE,

More Related