1 / 12

RS232 Converter SB-DN-RS232N

RS232 Converter SB-DN-RS232N. Description. SB-DN-RS232N is the converter between buspro and RS232 system, realize that control the RS232 system from buspro system, and vice versa. Function. 2 control way: RS232(ASCll Code or HEX) -> Buspro

tharms
Download Presentation

RS232 Converter SB-DN-RS232N

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RS232 Converter SB-DN-RS232N

  2. Description SB-DN-RS232N is the converter between buspro and RS232 system, realize that control the RS232 system from buspro system, and vice versa.

  3. Function • 2 control way: • RS232(ASCll Code or HEX) -> Buspro • RS232(ASCII Code or HEX) <- Buspro • Support ASCII code and hexadecimal • 24 Characters ASCII length. • RS232 interface works in all baud rates: 2400, 4800, 9600, 14400, 19200, 38400, • 57600, 115200 bps • Send and receive ASCII command • It can receive 99 ASCII/HEX to trigger different targets

  4. Connection

  5. Subnet ID and Device ID Device remark HDL is adding more and more protocols in it, so it is possible that customers don’t need to spend much time to configure it but just select the built-in protocol . Basicinformation

  6. Config serial port Need to match with 3rd party system.

  7. RS232HDL Buspro RS232HDL Buspro: It can set up to 200 strings and 20 targets for each string. Setup control targets in HDL system. Setup strings

  8. HDL busproRS232 HDL BusproRS232: It can set up to 200 strings and 20 targets for each string. Setup output strings to be transfer to RS232 port Setup inputs from HDL system

  9. Test Using a tool to test the function (e.g., FormCom232.exe) Tx window Rx window

  10. Test Configure COM port enable COM port

  11. Test Input a string Send out the string Get feedback from RS232 module

More Related