520 likes | 848 Views
Megaplex-4. v4.0 General Availability. Agenda. Introduction to RAD’s Service Assured Access Megaples-4 overview New v4.0 features & benefits Management Summary. RAD’s Service Assured Solutions. Retail Providers of Business Ethernet Services . Wholesalers. Service Providers
E N D
Megaplex-4 v4.0General Availability
Agenda • Introduction to RAD’s Service Assured Access • Megaples-4 overview • New v4.0 features & benefits • Management • Summary
RAD’sService Assured Solutions Retail Providers of Business Ethernet Services Wholesalers Service Providers Best Service Assured Access Solutions Mobile Operators Leasing Wholesale Networks Railways Substation Connectivity Motorways Transportation & Government Packet-based & Legacy Communications for Private Networks Teleprotection Connectivity Air Traffic Control Power Utilities Best EvolutionaryMigration Solutions Maritime Operational Network Government/Defense
Increase Revenues: SLA/Premium service introduction Up-selling opportunities Fast TTM Customer stickiness & reduced churn High resilience Service Assured SolutionsMajor Capabilities A comprehensive set of tools making it easier to plan, deploy, provision, and maintain Carrier Ethernet services • Reduce TCO: • Better network utilization • Reduce truck rolls • Reduce trouble ticket handling • Space and power savings • Minimize integration, training and inventory
Megaplex-4 • Megaplex-4 – Carrier-class, TDM and Ethernet aggregator, high capacity DS0 cross connect and next generation multiservice access node consist of two devices: • Megaplex-4100 – High scale Next Generation Multiservice Access Node • Megaplex-4104 – Compact Next Generation Multiservice Access Node MP-4100 MP-4104
Multiservice Support over SDH and Ethernet Networks Add Drop Multiplexer (ADM) SONET/SDH terminal SDH/SONET PBX Digital Cross Connect (DACS) TPR (Teleprotection) E1’s/STM-1/OC-3 STM-4/OC-12 Voice Modem Megaplex Analog bridge Phone - Fixed FE/GbE Router SCADA RTU Packet Switched Network TPR (Teleprotection) Breaker control circuit Relay/Alarm Intelligent Electronic Device (IED) Router Copper CPE Fiber CPE
Physical View 2 x Power supplies 10x IO modules 10 x I/O modules 4U (6.8”) 2 x Common Logic Hybrid Ethernet/TDM Compact Redundant Hot Swap Hybrid
MP-4104 – Physical View 2 Fans 2 Common Logic IEEE-1613 Compliant 2U (3.4”) 2 Power supplies 10x IO modules 4 IO modules Compact Redundant Hot Swap Hybrid Optional – No Fans
v4.0 Highlights General features • VLAN aware and unaware bridge • E-LAN, E-TREE services • Dedicated Ethernet module: 8 ports – RJ-45 or SFP • SFTP for enhanced security • SNTP – Synchinronizing all nodes to the same date and time source Carrier Ethernet capabilities • Traffic Management • Ethernet OAM • Ethernet PM Carrier Grade Ethernet Teleprotection Complete SHDSL EFM bonding solution • Ethernet ring Protection Switching (ITU-T G.8032) • Link Aggregation Control Protocol (IEEE 802.1AX) • Ultralow end-to-end commands and automation propagation delay over TDM or packet networks • EFM repeater (S-RPT) integration with optional power feeding
Carrier Ethernet Capabilities • Carrier Ethernet capabilities (With CL.2/A ) • Designed around RAD’s state of the art Carrier Ethernet engine (the same as the ETX line) • Traffic Management • Ethernet OAM • Performance Monitoring (Y.1731) • Bridge/Flow working modes • Ethernet Ring Protection (ERP) – G.8032v1 (With CL.2/A) • Migration path enabler (SDH to ETH) • Integrated ETX / Megaplex solution • 3rd Party interoperability • Dedicated Ethernet module • 8 x Copper (UTP) interfaces / 8 x Fiber (SFP) interfaces • Bridge / Flow working modes (Selection per port) • No need of external switch • MTU size: 9,600 Bytes Optimux ASMi PSN n x E1/T1 FE/ETH n x E1/T1 FE/ETH Local Services LS/HS Data SCADA Legacy services Voice MP-4100/4104 TDM-PW Gold Mission Critical Services EVC ETX-5300 MP-4100/4104 Silver ETX-5300 Real time - VOIP Bronze Video – best effort End-to-end Service Control, SLA Monitoring and Diagnostics
Megaplex-4 new Ethernet Services CE CE CE Headquarter Headquarter Headquarter UNI UNI • E-Line: point-to-point • Each EVC connects two or more UNIs • Replaces a TDM Private line (EPL) • Replaces ATM and FR (EVPL) • E-LAN: any-to-any • Multipoint L2 VPNs • Transparent LAN Service • Multicast networks • E-Tree: point-to-multi point • Point to multipoint connectivity – Internet access and/or IP TV services • No connection between leaves Point-to-Point EVC Megaplex-4 Megaplex-4 Megaplex-4 Megaplex-4 CE CE CE CE CE CE UNI UNI Megaplex-4 Megaplex-4 ETX Internet Router UNI UNI Any-to-any EVC UNI ETX ETX UNI Point-to-Multipoint EVC UNI UNI ETX
MEF CE 2.0 Highlights • CE 2.0 Service Manageability • E2E service and performance monitoring • Circuit validation and fault isolation • Benefit: Reduces service costs (OPEX) PSN E2E SLA Assurance eNB • CE 2.0 Multi-CoS – Multiple Classes-of-Service • Leverages TM tools for better QoS and Network Performance • Benefit: Efficient BW utilization avoids infrastructure over-build • Benefit: improve QoE by setting CBS per CoS (e.g. reduce queue length(CBS) for high priority, delay and jitter sensitive traffic while increasing CBSfor bursty, low priority traffic). E-Access • CE 2.0 Interconnect - Integrates autonomous CE networks • Accelerates delivery of off-net UNI-to-ENNI services • E-Access: New Wholesale Service • Benefit: Standardized Ethernet Access • Benefit: Minimizes quantity of custom Interconnectagreements UNI ENNI UNI EVC
Megaplex-4 Traffic Management Features • Extremely flexible classification (flow): • Port, VLAN-ID, P-bit, TOS-DSCP, EtherType • Hierarchical-QoS (H-QOS) with flow level TM (CL.2 Network ports): • CIR/EIR Policing per flow for differentiated services • SLA assurance in congested links - shaping per EVC • Up to 8 queues per flow with Strict Priority and WFQ scheduling • Simplifying operation with powerful bandwidth profiles • Benefits • Increased revenues using ‘Intelligent’ over subscription • Multiple services from same port - EVC • Higher bandwidth utilization - EIR • Better utilization of network resources • Maintain customer satisfaction with differentiated services • Different Drop probability, delay and jitter at different cost • Reduce churn by ensuring SLA • Per service shaping ensures bandwidth per customer (EVC, EVC.CoS)
Traffic Flow – Towards CL.2/A GE Scheduling (Between CoS) Policing (2R3C) Shaping (1R) Scheduling (Between EVCs) Mapping to Flow (marking EVC.CoS) Classification L2 Attributes 100,1 (RT) CIR/EIR 100.2 (ERP) WFQ, SP, WRED CIR/EIR 100.3 (WEB) Video CIR/EIR Shaping 100.4 (Unkn) CIR/EIR VoIP 100.5 (blocked) EVC1 CIR/EIR 200.1 (RT) EVC2 Shaping WFQ ERP CIR/EIR 200. 2 (ERP) EVCn CIR/EIR 200.3 (WEB) Web CIR/EIR Shaping 200.4 (Unkn) CIR/EIR Unknown 200.5 (Blocked) CIR/EIR WFQ, SP, WRED Social
OAM – Operations Administration & Maintenance Substation A Real Time Central Site Priority Data Real Time EVC Best Effort Megaplex-4 Priority Data UNI Megaplex-4 Best Effort EVC 1 PSN/TDM Substation B EVC 2 Real Time Real Time Priority Data EVC UNI Best Effort Priority Data Best Effort UNI IEEE 802.3-2005 (802.3ah) IEEE 802.1ag OAM / ITU-T Y.1731 PM IEEE 802.1ag Connectivity Management ITU-T Y.1731 Performance Monitoring
Typical Applications Last Mile Access for Layer-3 Network ETX ETH POP ETH • Traffic segregation among multiple customers using – VLAN per customer • Aggregating multiple end points from one or more customers • Forwarding Ethernet traffic based on VLAN, VLAN+MAC or MAC • Extending Ethernet connectivity over various media types ASMi/LA-210 SHDSL.bis Megaplex-4100 ETH Layer-3 PSN Optimux ETH FO RICi-4/8 n x E1 ETH ETH ETH Ethernet Layer-2 IP Layer-3
GbE Ring (ERPS – ITU-T G.8032) • Standard Ethernet Ring • Based on modern G.8032v1 ERPS (Ethernet Ring Protection Switching) • 3rd party interoperability • Can work with other devices that support the standard • Migration path enabler • Resilient topology with sub-50ms protection switching similar to SDH/SONET rings Control Center Teleprotection SCADA SCADA ETH Megaplex-4100 Megaplex-4100 Megaplex-4100 Megaplex-4100 Megaplex-4100 Voice Voice G.8032 ERPS SDH/SONET PBX PBX ETH SDH/SONET/GbE Airmux Airmux SHDSL.Bis FO Optimux-108 ASMi-54
Link Protection • LAG (Link Aggregation) – 802.1AX based • Redundant connection to a single upstream device via two ports which form a singe logical port • Provides both link protection as well as equipment protection • LACP (Link Aggregation Control protocol) used to sync LAG members and identify failures CPE PSN
Dedicated Ethernet Module • 8 Ethernet interfaces • High port density and low price per port • Fiber and Copper • UTP or SFP for flexible connectivity • Local Switching • Saves the need of an external switch • Bridge / Flow working modes (Selection per port) • MTU size: 9,600 Bytes ETH RTU IP/MPLS Substation/Train Station/Control Tower Megaplex-4100 Voice PC PBX SDH/SONET Router Server GbE VideoCamera ETH
CMD In/Out Teleprotection Module • 4 input commands • 8 output commands • 4 Primary commands, 4 Secondary commands • For each secondary command one primary command can be selected • More than one secondary command can be bounded to one primary command • Event time stamping based on IEC‐60870‐5‐104 • Event reporting: Commands, Automation, End‐to‐End Delay, Violations, Bit Error Rate • Hardware-based processing prevents mutual influence between commands
EFM Repeater – S-RPT/EFM • Managed modem transmitting full-duplex at data rates of up to 11.4 Mbps over 4-wire lines • TC-PAM 16/32 Line coding • EFM Bonding - Per IEEE802.3ah and ITU-T G.991.2 • Weatherproof metal enclosure for outdoor installation • Plastic enclosure for indoor installation • Local and remote power feeding
Typical Applications Solution benefits • Extend the reach – covers longer distance over DSL lines of High Ethernet rate (up to 11.4Mpbs) • EFM bonding – Reliable DSL line and high ETH rate up to 11.4Mbps • Varied power options – local and remote power feeding • Single management platform from the MP-4100 to the CPE (ASMi-54L/LA-210) • Zero Touch – full rate adaptation without any user confirmation Central Office SHDSL.bis Branch MPF Megaplex-4100 LAN LAN 120 VDC NMS FE PSN SHDSL.bis SHDSL.bis GbE Branch SHDSL.bis STM-1/OC-3 STM-4/OC-12 SDH/ SONET S-RPT/EFM S-RPT/EFM S-RPT/EFM ASMi-54L LA-210 FE S-RPT/EFM
Remote Power Feeding Options Central Office Branch MPF Megaplex-4100 LAN LAN NMS FE PSN 1 SHDSL.bis SHDSL.bis GbE 120 VDC Branch SHDSL.bis 2 STM-1/OC-3 STM-4/OC-12 SHDSL.bis SDH/ SONET S-RPT/EFM S-RPT/EFM S-RPT/EFM ASMi-54L LA-210 FE S-RPT/EFM S-RPT/4W/EFM powered from MPF (120VDC) S-RPT/4W/ EFM (2) powered from S-RPT(1) – Phantom power
CL.2 Options • Megaplex-4 v4.0 introduces two new CL.2 assembly options (CL.2/A) using RAD’s state of the art ETX Carrier Ethernet engine • The following table highlights the major differences
Case Study Major Power Utility in Russia: Substations interconnection over a Carrier-grade Ethernet network Carrier-grade Ethernet ETX-5300A ETX-5300A ETX-5300A TDM Uplinks Pseudowire 10 Gigabit Ethernet-based Core Network Old Substations Telemetry Telemetry Telemetry Megaplex Megaplex Megaplex Megaplex Megaplex RS-232 Telemetry SCADA SCADA RS-232 ExistingSDH SCADA n x E1 n x E1 ETH STM-1 STM-1 SCADA PBX PBX ETH PBX PBX Voice Existing SDH Voice 10 GbERing NMS New Control Center RS-232 Telemetry Server STM-1 RS-232 ETH ETH n x E1 SCADA ETH ETH ETH Voice PBX Old Substations Voice RS-232 Voice Ethernet Uplinks NMS Network Management New Substations
Case Study:Utilities in Russia: Integrated Data and Voice Services over SDH • Customer Benefits: • Legacy (FXS/FXO, 4-wire, RS-232) and Ethernet services over the SDH and Leased E1 • Centralized solution with management • Scalable, typical solutions for Power Industry • RAD Advantages: • Powerful Central Node, MP-4100 -based • Ethernet traffic concentration • Support the traffic protection in the STM-1 SDH ring Megaplex-2100 Megaplex-2100 Megaplex-2100 Megaplex-2100 LAN #1 10/100BaseT FXS/FXO/4W, RS-232 FXS/FXO/4W, RS-232 IP SDH E1 STM-1 GbE «NEW» remote nodes E1 Megaplex-4100 n x FractionalE1s FE1 FE1 LAN #n 10/100BaseT FXS/FXO/4W, RS-232 «Old» remote nodes FXS/FXO/4W, RS-232 FXS/FXO/4W, RS-232
Fiber and Copper Aggregation for Carrier Applications • Transport TDM and Ethernet from multiple branches over Fiber and/or copper to a central site, and aggregate the traffic towards SDH/SONET and/or PSN • Utilize existing copper/fiber infrastructure saving forklift expenses • Multiplex services at the CPE to optimize bandwidth and lower CapEx and OpEx • Aggregate Ethernet and TDM to SDH/SONET and/or PSN to optimize bandwidth towards the network • Smoothly migrate services reducing forklift costs and network downtime Branch Central Office SHDSL.bis FE NMS Megaplex-4100/4 PSN Branch E1 GbE FO FE STM-1/OC-3 STM-4/OC-12 SDH/SONET Branch FCD-IP E1 FE ASMi-54 Optimux-108
Case Study:Carrier: in Africa: Bank – Branches Connectivity over PSN • Customer Benefits: • Branches connectivity over any existing Last Mile infrastructure: Copper, PDH and Wireless • Reduce CapEx/OpExby leveraging existing infrastructure for providing ETH/IP connectivity for the branches over new IP-MPLS network, enabling fast delivery • RAD Advantages: • Support ETH services over any available access infrastructure • Complete Access solution with Aggregation platform (MP-4100), Aggregate any ETH/IP traffic coming from DSL, PDH, Wireless towards IP/MPLS Network. Branch Branches 2/4W SHDSL 2/4W SHDSL E1 E1 Router Router ETH ETH POP POP PDH PDH PDH Router Router Router VLANz Megaplex-4100 Megaplex-4100 2W SHDSL E1 E1 VLANy GbE GbE ETH VLANx E1 GT-IP/MPLS Branch ATM 2W SHDSL E1 ETH Branch ETH Airmux Airmux ATM ETH ATM ASMi-52 ASMi-52 ASMi-52 ASMi-52 ASMi-52 ASMi-52 RICi-E1
Case Study: Carrier in Africa: Ethernet and TDM Services over Copper or Fiber • RAD Advantage: • Wide range of interfaces (SHDSL/E1/ETH) • MP-4100 high capacity. STM-1 and legacy services on single BOX. • Multiratesupport • Single multi-functional platform • Customer Benefits • Reduce OpEx/CapExby Multiservice aggregation device at the PoP • Both E1 and Eth services over single Fiber • Ensure SLA by providing advance ETHservices with QoS Internet Customer A Customer A E1 E1 FO Link FO Link FE FE GE NMS Customer B Customer B GE Megaplex-4100 Megaplex-4100 STM-1 STM-1 FE FE SHDSL SHDSL SDHNetwork Customer C Customer C n x E1 n x E1 FE FE Optimux-108 Optimux-108 ASMi-54 ASMi-54 RICi-4E1 RICi-4E1
Service Assured Networking -Operational Core Network Substation • Operational network traditionally based on SDH/SONET • Carrier Ethernet is ideal for replacing SDH/SONET for operational applications, offering various advantages over IP/MPLS: • Simplified architecture and management • Reduced Total Cost of Ownership (TCO) • Increased security • Lower latency • Assured QoS using CE tools • Ongoing performance monitoring RTU RTU Teleprotection Teleprotection PBX PBX Best evolutional, resilient& secured solutionfor the operational Network Carrier Ethernet Substation NMS
is a unified, carrier-class management platform composed of three major management elements: • Element Management Level (FCAPS) • Performance Monitoring Portal • Network Service Manager
RADview Position RADview
Device Management • Megaplex-4 supports the following management capabilities Device Management • CLI driven terminal • Radius • TFTP/SFTP • Telnet • SSH • SNMP v1, v3 • Out-of-band management ports • Ethernet; RS-232 • In-band management
Summary • Even though the market is changing there is still a need for legacy equipment • Co-existence of network technology requires hybrid solutions • The Megaplex platform answers both legacy and future needs with its unique value proposition: • Lower CapEx using a single box solution • Lower OpEx by bandwidth optimization and low TCO • Support for legacy and for new services • Fiber and copper aggregation in the same box! • Clear migration path to PSN saves forklift upgrade costs • Unified solution as a central solution for multiple types of CPE • Powerful management • Clear roadmap with State of the Art innovations