270 likes | 293 Views
Stream Erosion & Deposition. Chapter 6 sections 1 and 2. What is a Stream?. A stream is a moving body of water that eventually connects to an ocean Note: Today we will be discussing large streams called rivers!.
E N D
Stream Erosion & Deposition Chapter 6 sections 1 and 2
What is a Stream? • A stream is a moving body of water that eventually connects to an ocean Note: Today we will be discussing large streams called rivers!
1. Velocity – how fast or slow the river is moving; this determines the rivers ability to erode sediments River Characteristics Which river has a greater velocity?
River Characteristics 2. Gradient – the slope or steepness of the river; the steeper the gradient, the more energy
River Characteristics 3. Discharge – the amount of water moving by a certain point of the river in a set time The Amazon River in South America has greatest discharge 212,400 m3/s Mississippi River in USA has 7th greatest discharge at 17,300 m3/s
4. Stream Channel – the course that the water flows in a river River Characteristics
Following a River from Source to Mouth • A river begins at the source/headwaters • This is usually where you find the steepest gradient • You may also find V-shaped valleys here
Young Streams: -steep slope/gradient -high velocity -down cutting erosion http://pinker.wjh.harvard.edu/photos/american_west/pages/Yosemite%20Falls.htm
Mature Streams • flood plain develops • lower slope/gradient • meanders (bends) form http://dynamic.ou.edu/notes/running_water/running_water.html
OLD Streams -low slope/gradient -very wide channel and floodplain -abundant meanders NIAGARA RIVER
Following a River from Source to Mouth • Alluvial fans – fan-shaped sediment deposit that forms when a high gradient stream leaves a narrow valley
Following a River from Source to Mouth • As the river continues, you will also find many tributaries – this is where one stream empties into another As more tributaries add water to the main river, the amount of discharge increases
Following a River from Source to Mouth • As the river moves downhill, it will erode its channel until it hits base level • Base level is the lowest point to which a river can erode its channel
Following a River from Source to Mouth • As a river approaches base level, it can develop meanders – bends in the stream channel
Following a River from Source to Mouth • Delta - a fan-shaped sediment deposit where a river empties into an ocean at mouth
Sediment Transport in Rivers • Streams carry sediment in 3 ways: • In solution (dissolved load) • In suspension (suspended load) • Scooting or rolling along bottom (bed load)
1. Dissolved Load Sediments that are dissolved into river water
2. Suspended Load • Fine-grained sediment (like sand, silt, clay) that remains in the water during transportation • Usually what you see that makes a river look dirty • Most sediment carried by a stream is suspended • This amount increases dramatically during flood
3. Bed Load • Heavier, coarse grained sediments that travel along the bottom of a stream. • Causes the most stream erosion! • Sediment may not move frequently
Higher velocities on outside of meanders causes erosion (cut bank) Lower velocities on inside of meanders causes deposition (point bar) Fig. 10.6 Meander Velocity
A. Narrow and Deep Less resistance Faster flow B. Wide and Shallow More resistance Slower flow C. Rough Streambed More resistance Slower flow Channel Shape and Roughness
Stream Velocity Controls: • How much and what grainsize of sediment is • Eroded and • Transported • Where and what grainsize size will be sediment
Drainage Patterns A. Dendritic Geology controls stream patterns • Uniformly Erodible (e.g., flat-lying sedimentary rocks of the Midwest) • Conical Mountains (e.g., Volcanoes) • Fractured bedrock (shallow bedrock) • Resistant ridges of tilted sedimentary rocks (e.g., Valley and Ridge Province of Pennsylvania) B. Radial C. Rectangular D. Trellis