1 / 32

Aircraft Repair and Supply Center

Aircraft Repair and Supply Center. Unique Identifier (UID) 2D Barcoding Project. U S COAST GUARD. UID / 2D BARCODING Datamatrix Symbol. NASA MARSHALL SPACE CENTER. DEPT OF DEFENSE. USCG. Partners in the future development of “UID”. ARSC. MARCH 2005. DEFINITION.

tod
Download Presentation

Aircraft Repair and Supply Center

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aircraft Repair and Supply Center Unique Identifier (UID) 2D Barcoding Project

  2. U S COAST GUARD UID / 2D BARCODING Datamatrix Symbol

  3. NASA MARSHALL SPACE CENTER DEPT OF DEFENSE USCG Partners in the future development of “UID” ARSC MARCH 2005

  4. DEFINITION UID:IS A NEW GLOBALLY UNIQUE “PART IDENTIFIER” CONTAINING DATA ELEMENTS USED TO TRACK PARTS THROUGHOUT THEIR LIFE CYCLE.

  5. United States Coast Guard Aircraft Repair And Supply Center 2D Barcoding UID Programs Background : *Started June 1996 *June 1997 Phase I: Installed 2D Barcoding labels on 500 HH-65 Flight Safety Critical Aircraft Parts (FSCAP) *June 1998: Integration of the USCG “AMMIS” computer program for logistics with the project’s software “Hardbody”.

  6. 2D Barcoding UID Programs (cont’d) * December 2002: Phase II included the “Permanent Direct Part Marking” of an additional 500 FSCAP items from the HH-60J, HC-130J and HU-25 aircraft. *February 2005: Signing of the MOU between NASA, DoD/OSD, and the USCG ARSC

  7. 2D BARCODING Program Benefits • Tamper – resistance; prevents duplication. • Will provide more solid evidence of criminal conduct thus ensuring a better chance of prosecution and conviction. • Automatically capture and update historical data for any given part. • Eliminate human error when capturing part identification. • Has the ability to provide readable markings on very small parts, and internal engine and gearbox parts. • Portable data readers (don’t have to remove part from aircraft to review history) • Accumulate part history in a central or national database. The FAA, DOT and the Aircraft Transportation Association (ATA) are addressing this issue.

  8. 2D BARCODING AdditionalBenefitsInclude: • Improve inventory / logistics management • Improve ability to trace parts • Improve flight and aviation maintenance • Improve operations efficiency which in turn will reduce overall cost and improve scheduling

  9. MILESTONES • The program has been marked by a number of technical firsts. • These included but are not limited to the following: • The first use of a fully integrated mobile marking cart in the field • The first use of a hand held laser to mark products in the field • The first use of the laser bonding process to mark FSCAPs. • The first use of color additives in conjunction with deep electro- • chemical etch and laser coating removal processes to improve • marking contrast. • The first read through paint markings applied to commercial • products.

  10. Marking Processes • Approved marking processes (as-defined by NASA-STD-6002 & MIL-STD-130 - Draft) • Decals • Dot Peen • Electro-Chemical Coloring • Micro-Milling • Ink Jet • Laser Coat & Discolor • Laser Coat & Remove Process • Stencil (ink and paint) • Gas Assisted Laser Etch • Deep Dot Peening (>.004-inch deep) • Laser Bonding • Laser Engineered Net Shaping (LENS) • Laser Engraving • Laser Inducted Surface Improvement (LISI)

  11. Types of Parts that were Marked • Airframe and structural components • Gear boxes and rotor components • Internal and external engine components

  12. New Technology Applications • The Dataline team shall arrange for the demonstration of new AIT technologies. • Mobile Marking Carts • Portable Vacuum Arc Vapor Deposition Marker • Read-through-paint (RTP) Readers • Strain Measurement System

  13. MXi Reader Mark Verification Data 2D Datamatrix Barcode USCG FSCAP Part

  14. This slide depicts the form that has been developed specifically for this project. Not only does it establish all of the pertinent data for each part; but also shows an actual photo of the part and will also show the location of the datamatrix bar code.

  15. 2D Barcoding Current Update During the period of Feb – Mar 2005 the US Coast Guard continued its efforts to study and gain ground in the 2D Symbology Technologies. During Phase II of the project some 500 parts were permanently marked with several methods of marking. As the Coast Guard continues to put forth efforts to lead the way in current technologies, they continue to study and document the facts discovered during these testing phases. Recently evaluated were 52 aircraft parts that were assigned at ARSC. These parts had been removed from aircraft for maintenance (Non-RFI), returned from overhaul (RFI), or currently installed on aircraft in for maintenance (PDM). The types of parts that were evaluated were mechanical, hydraulic, avionics, engine / gearbox. The types of markings that were evaluated were Laser Etch, Laser Bonding, Rastoring, Dot Peen, and tamper resistant labels.

  16. 2D BARCODING The following notes are an overview of evaluation results: All laser etching marks remain Grade “A” ·All dot peen read Grade “A” once the new paint was removed ·Rastoring showed signs of degrading from the overhaul process but still received a Grade “B”. Degrading occurred in the “Contrast” element of the evaluation. ·Laser bonding showed Grade “A” with a remarkable trait: The parts that are in a heavy hydraulic environment indicated 0 degradation for the label and adhesive. These parts have been installed and flown 97 and 102 hrs respectively. ·Tamper resistant labels in the avionics remained intact (2 parts thru overhaul) and a remarkable note is that we applied the same label to several main and tail rotor blades. Two main rotor blades were available for this evaluation. These blades have over 90 flight hours and the labels remain in place and grade “A” readable. The labels are located in the cuff area of the blade and are exposed to all elements of flight. * Note that all of the evaluated parts have flown between 90 and 162 hours

  17. DOD / OSD POLICY • UID: MIL-STD 130L – approved for release Oct 2003 • Mandatory UID DFARS clause to be included in all new solicitations and contracts issued after January 01, 2004. • UID must be applied to items that are serialized within DoD today or already have data plates. • Effective January 01, 2006 all government furnished property (GFP) must meet the UID Policy Requirements. • All programs must complete marking of items and all applicable embedded assets within items by December 31, 2010.

  18. UID Identification Recommendation from DHS: DHS: 7009 USCG: 4329 TSA: 2387 Serialized numbers in the que: example B479832Q3 Example of Marking UID: USCG PART: 7009 4329 B479832Q3 Serialized Numbers DHS USCG

  19. UID Identification Recommendation from DoD / OSD Construct #1 Issuing Agency Code: D Enterprise Identifier (MFR Cage): 0CVA5 Serial Number: 786950 Example: D 0 C V A 5 7 8 6 9 5 0 IAC EID Serial Number

  20. UID Identification Recommendation from DoD / OSD Construct #2 Issuing Agency Code (IAC): UN Enterprise Identifier (MFR Cage): 194532636 Orig. Part Number: 1234 Serial Number: 786950 Example: U N 1 9 4 5 3 2 6 3 6 1 2 3 4 7 8 6 9 5 0 ORIG PART NUMBER SERIAL NUMBER IAC EID

  21. MARKING AMMUNITION Over six hundred 9mm rounds have been marked and test fired. After firing into brick walls, water, wood, etc; the barcodes were still readable.

  22. Bullet Marking • Project initiated by Secret Service • Need to link spent bullets to shooters • Goal accomplished by adding 2-D symbol insert into bullet during manufacturing US Patent Number 5698816 • Insert placed between jacket and core • Markings survive discharge and impact • Ammunition lots assigned to individual Agents

  23. Small Arms • Project initiated by U.S. Army • Provides means to automate inventory and issuance • Symbols applied in arms rooms on-site using mobile laser • Marking process tested and approved by U.S. Army Armament Research and Development Center (AMSTA-AR-ESW-S), Rock Island, Illinois

  24. 5-Inch Shell Casing Marking • Project initiated by U. S. Navy and supported by United Defense, RVSI and Ferro Corporation • 2-D Symbols need to support MK45 Mod 4 ammunition auto-loading system • Markings applied using Laser bonding process - Metal power fused to surface using the heat generated by a laser beam.

  25. Radio Control Set with Datamatrix Label Bar-code recently implemented by Rockwell Collins 2D Barcode Label

  26. What’s in the future? • 2D Barcode project

  27. CONCLUSION In conclusion, the US Coast Guard is aggressively pursuing new processes and procedures to help prevent bogus, counterfeit and unapproved parts from entering not only the Coast Guard inventory; but all of the aviation industry as well. As we continue our research and development; the implementation and use of UID / 2D Barcoding will assist in the fight against the acquisition of unapproved parts; and enhance the processes of accountability; maintenance and safety. The US Coast Guard continues to lead the way in the development and application of 2D Datamatrix Barcoding within government and commercial agencies.

  28. Points of ContactUS Coast Guard UID / 2D Barcoding Project: Mr. Terry Boyce Mr. Dan Beals Voice Tel: 252-335-6508 Voice Tel: 252-334-5418 Fax: 252-334-5292 Fax: 252-334-5292 Pager: 1-877-713-6950 E-mail: tboyce@arsc.uscg.milE-mail: dbeals@arsc.uscg.mil

More Related