1 / 71

Network layer

Network layer. Chapter 6 Intro to Routing & Switching. objectives. Upon completion of this chapter, you should be able to: Describe the purpose of the network layer Explain why IPv4 uses other layers for reliability Explain how host devices use routing tables to direct packets

todd-moon
Download Presentation

Network layer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Network layer Chapter 6 Intro to Routing & Switching

  2. objectives • Upon completion of this chapter, you should be able to: • Describe the purpose of the network layer • Explain why IPv4 uses other layers for reliability • Explain how host devices use routing tables to direct packets • Compare host and router routing tables • Describe components of a router • Describe the boot-up process of a Cisco router • Configure a Cisco router and interfaces • Configure a default gateway

  3. 6.1.1 The network layer

  4. Network layer

  5. 6.1.2 All about ip

  6. ip • Low overhead • Delivers packet to destination only • Does NOT track or manage flow • Other layers handle that • Connectionless • Doesn’t need a connection established w/ dest. • Best effort delivery • Unreliable, no guarantee (other layers) • Media independent • Doesn’t matter which type of cable being used

  7. Media independent • Doesn’t matter what cables/media it travels over • What layer handles the prep for media?

  8. ACTIVITY • 6.1.2.6 • Read each IP characteristic & decide if it describes connectionless, best effort, or media independent.

  9. Review- 3Q • IP is described as connectionless, or connection-oriented? • Connectionless • When using IP, what protocol would be used to acknowledge delivery of packets and retransmission of missing ones? • TCP • What layer does TCP operate at? • Transport

  10. 6.1.3 Ipv4 packet

  11. ipV4 packet • Includes Header & Payload • Header includes: • Source & destination IP • DS (Differentiated Services) • Defines the priority of each packet • Protocol • TCP/UDP • TTL (Time-to-Live) • Hops until dropped

  12. Sample ipv4 header Version, IP’s DS, Total Length, Flags, TTL

  13. review • Which field in the IPv4 header… • Tells the priority of a packet? • DS • Helps with fragmented packets when split to not exceed the MTU on media? • Flags • Name a connectionless layer 3 protocol that is popular & in use today? • IP • What helps IP with guaranteed delivery? • TCP

  14. 6.1.4 Ipv6 packet

  15. What’s wrong with ipv4? • Running out of addresses • Routing tables growing • Lack of end to end connectivity • NAT is normally used • NAT allows certain private IP addresses to be used within a network and not shared with the outside world • The internal private IP gets translated to a public one to send data across Internet

  16. IPv4 to IPv6 • 32-bit addresses • 4 billion available • Many header fields • Must use NAT • To conserve addresses • 128-bit addresses • 340 undecillion avail. • Less header fields • Better packet handling • No need for NAT • A lot of IPv6 addresses IPv4 IPv6

  17. Ipv6 header & IPv4 header

  18. Sample ipv6 header Version, Payload Length, Hop Limit, IPv6 addresses

  19. activity • Handout to compare IPv4 & 6 headers • 6.1.4.6 • Read each IPv6 header description & click which field it belongs to.

  20. review • Explain NAT. • Private internal IP addresses. Can’t be seen outside network. Translate to a public IP for the entire internal network. • Why is NAT not needed with IPv6? • A ton of addresses! • What field in an IPv6 header… • Has routers use the same path for real-time packets? • Flow label • Is like the DS field for priority? • Traffic Class

  21. review • Review the picture. • What kind of IP is being used? • IPv4 • How many hops from PC1 to PC33? • 3

  22. 6.2.1 How a host routes

  23. Host ready to send • Itself (loopback) • 127.0.0.1 • Local • Shares same network address • Remote • On a different network

  24. Host ipv4 routing table • PC has a “mini” routing table

  25. activity • 6.2.1.7 • Identify the parts of a host routing table

  26. review • How does a PC know where to send packets? • It has its own routing table • What 2 commands on a PC will view the routing table? • Netstat –r or route print

  27. review

  28. 6.2.2 Router routing table

  29. How to route the packet • After packet reaches DG (router), it looks at the routing table to see where to send it • What’s in the table? • Directly connected routes • Remote routes

  30. What would it know?

  31. Routing table • Show ip route • Stored in RAM • How it was learned • When it was updated • Which interface to use to get to that network

  32. Parts of routing table

  33. ROUTING TABLE- OTHER NETWORKS

  34. 192.168.10.0/24 10.1.1.0/24 .10 .10 G0/0 .1 209.165.200.224 /30 PC1 .1 .226 .225 S0/0/0 R1 R2 .1 G0/1 .1 .10 .10 PC2 10.1.2.0/24 192.168.11.0/24 R1#show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks D 10.1.1.0/24 [90/2170112] via 209.165.200.226, 00:00:05, Serial0/0/0 D 10.1.2.0/24 [90/2170112] via 209.165.200.226, 00:00:05, Serial0/0/0 192.168.10.0/24 is variably subnetted, 2 subnets, 3 masks C 192.168.10.0/24 is directly connected, GigabitEthernet0/0 L 192.168.10.1/32 is directly connected, GigabitEthernet0/0 192.168.11.0/24 is variably subnetted, 2 subnets, 3 masks C 192.168.11.0/24 is directly connected, GigabitEthernet0/1 L 192.168.11.1/32 is directly connected, GigabitEthernet0/1 209.165.200.0/24 is variably subnetted, 2 subnets, 3 masks C 209.165.200.224/30 is directly connected, Serial0/0/0 L 209.165.200.225/32 is directly connected, Serial0/0/0 R1#

  35. activity • 6.2.2.7 • Identify the elements of a routing table • Lab 6.2.2.8 • Discover your PC’s routing table

  36. review • A packet comes into the interface of a router. Which address does it check? • Destination IP • What does it then use that address to look at? • Routing table • What happens if a match is found for the destination network? • It sends it out that port towards that destination

  37. review • What command displays the routing table on a router? • Show ip route • Where is the routing table stored? • RAM • What would happen if a destination network was not in the routing table and there was no default route configured? • Packet is dropped

  38. 6.3.1 Anatomy of a router

  39. The router is a computer • OS • RAM • CPU • ROM

  40. Router memory

  41. Router interfaces WAN Serial Ports in slot LAN interfaces LAN Interfaces in slot Console Port RJ45 AUX Port RJ45

  42. activity • 6.3.1.8 • Match the router interface or function with its description • Lab 6.3.1.9 • Explore the router externally & using show commands • Lab 6.3.1.10 • Determine connectivity options on a router

  43. Review- 5Q • Where is the IOS stored? • Flash • Where is the running-config at? • RAM • Where is the startup-config stored? • NVRAM • Where is the limited IOS at? • ROM • Where is the routing table stored? • RAM

  44. Review- 4Q • Based on the last 5 questions, which ones will get “lost” if you lose power to the router & why? • Running-config & routing table because they are in RAM • Which ports on the router will allow out-of-band management? • Console & AUX • If you want to gain access to router configuration remotely through Telnet or SSH, which interfaces would you be “connecting” to? • Ethernet/LAN or Serial/WAN • What 2 things get copied into RAM upon a normal boot? • IOS & startup-config

  45. 6.3.2 Router boot-up

  46. Boot summary • Similar to PC booting • POST • IOS in flash memory & loads into RAM • Startup-config loads into RAM • Becomes running-config • Changes made to config happen in RAM/running-config • MUST SAVE THEM!

  47. Step 1 • POST tests hardware (CPU, Memory) • ROM: Bootstrap • Boot Image • Begins search for IOS

  48. Step 2 • Locate & load IOS into RAM • Usually in Flash (default) or TFTP Server

  49. Step 3 • Configuration File or Setup • NVRAM (1st), TFTP Server (2nd), Console (3rd) • If found, copies into RAM • Becomes the running-config • If not found, enters Setup Mode

  50. Verify & troubleshoot • Show version • IOS version • Version of bootstrap • Location & name of IOS • CPU & RAM • Interfaces • Amount of NVRAM & Flash • Config-register • 0x2102

More Related