1 / 7

SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013

SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 . Sketch of the full assembled mockup . Closing sheet. 72 cubes. PEHD primary shielding 4 parts. Al frame, 4 parts. MPPC. Backside stiffeners. MPPC protection.

tom
Download Presentation

SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 Sketch of the full assembled mockup Closing sheet 72 cubes PEHD primary shielding 4 parts Al frame, 4 parts MPPC Backside stiffeners MPPC protection Mockup will be built to test assembly solutions and the proposed design of the SOLID detector

  2. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 2 kinds of stifferner will be tested. Stiffener will be use to improve the stiffness of the détection plane during the assembly procedures (backside stiffener mounted only) and during the shipping and mounting on site (stiffener mounted en both side). Sheet and stiffener will be removed after the detector installation. Shorts stiffeners 1 mm stainless steel sheet longs stiffeners

  3. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 mockup, with back side shorts stiffeners, ready to be filled with cubes and fibres

  4. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 Cube size: 50.5x50.5x50.5 Including, cube, tyvek Lithium, savety marging Cross section of the mockup Optical fiber Clothing sheet thickness: 1 mm (material to be defined, PVC, …) PEHD, thickness: 20 mm Al frame thickness: 50 mm

  5. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 Lifting eye bolt Detector (mockup) in working configuration, for the testing of the lifting solution, supporting solutions, will be built also to test the stiffness of the plastic closing sheet alone when the detector is in vertical position. Possibles supports

  6. SOLID : Assembly Mockup : Buhour-Guilloux : 12/2013 MMPC used for the design

  7. Proposition de table de montage Cadre 1.4x1.4m Orientable et élévatrice Assemblage des plans Mis en position pour manipulation

More Related