1 / 18

Woodwork Tools 2 Quiz

Woodwork Tools 2 Quiz. 1.What is the correct name for this tool?. Depth Gauge. Cutting Gauge. Mortise Gauge. Marking Gauge. 2. Which of the following tools would be used to rip a standard sheet of 9mm Plywood in half?. A Coping Saw. A Tenon Saw. A Jnr Hacksaw. A Panel Saw.

tosca
Download Presentation

Woodwork Tools 2 Quiz

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Woodwork Tools 2 Quiz

  2. 1.What is the correct name for this tool? Depth Gauge Cutting Gauge Mortise Gauge Marking Gauge

  3. 2. Which of the following tools would be used to rip a standard sheet of 9mm Plywood in half? A Coping Saw A Tenon Saw A Jnr Hacksaw A Panel Saw

  4. 3. What is the correct name for this saw? Flush Cut Saw Dovetail Saw Pad Saw Bow Saw

  5. 4.What is the correct name for this tool? End Cutters Engineers Pliers Pliers Pincers

  6. 5.Which joint is this tool normally used to mark out? Rebate Joint Cross Halving Joint Mortise & Tenon Joint Through Housing Joint Dovetail Joint Stopped Housing Joint

  7. 6.What is the correct name for this tool? Sliding Bevel Cutting Gauge Mitre Gauge Adjustable Square

  8. 7. Which picture shows the correct way to use these pincers ? Roll the pincers as shown Pull the pincers as shown

  9. 8. Which of the following tools would be used to start a small hole for a screw? A Countersink Drill A Bradawl A Nail Punch A Scriber

  10. 9. What is the blade of a Panel saw made from? Spring Tempered Tool Steel Stainless Steel Cart Iron Bright Drawn Mild Steel (BDMS)

  11. 10. What is the correct name for the tool being used in this picture? Router Cutting Gauge Sliding Bevel Cabinet Scraper Mortise Gauge

  12. 11. What is the correct name for the tools shown below? Hollow point Nail Punch Centre Punch Parallel Punch Dot Punch

  13. 12.What is the correct name for this part of a Mortise Gauge? Thumbscrew Spur Stem Stock

  14. 13. Which of the following tools would be used for marking out angles other than 90˚ A Try Square An Engineers Square A Sliding Bevel Odd Leg Callipers

  15. 14. What are Trammels normally used for? Drawing lines parallel to an edge Marking out Mortise Joints Marking out Circles Centre Punching Holes

  16. 15. What is the correct name for this tool? Panel Saw Coping Saw Piercing Saw Flush Cut Saw Bow Saw Fret Saw Dovetail Saw

  17. Quiz Completed Well Done

  18. Wrong Click here to try again

More Related