30 likes | 41 Views
A Broadband Internet Access Service is essential for tplinkwifi.net access, possibly either over Ethernet network cable wire, DSL or Cable network connection.
E N D
TP-link Router Setup Over tplinkwifi.net Prerequisites for Connecting to the TP-Link Wi-Fi Router wifi – TP-link router setup: ●A Broadband Internet Access Service is essential for tplinkwifi.net access, possibly either over Ethernet network cable wire, DSL or Cable network connection. ●A Cable or DSL Modem is a requisite too with a condition that it must have RJ45 connector if your TP-link router model is attached to modem with wired wire. ●A Computer device is needed for directing TP-link router login and TP-link router setup across tplinkwifi.net, it must be connected to the router model employing an Ethernet cable or utilizing RJ45 connectors. ●TCP/IP protocol should be functioning on the computer. ●Accessible Internet Web browsers to direct Asus router setup through router.asus.com login.
Positioning TP-Link Wi-Fi Router ahead of TP link Router Setup: ●Set your TP-Link Wi-Fi router in midway and open location of your house ●Position your TP-link router in the setting that would cause minimal wireless signal interference from any surrounding metal, or concrete or magnetic objects. ● Site your TP-link router on the floor to secure high wireless network signal strength from it. ●Set your TP-link router in the zone that is devoid of any direct sun rays. Installation of TP-Link Wi-Fi Router- TP-link router setup Before you initiate TP-link router setup, you must be certain about your TP-link router being connected to the Internet network connection via broadband service as discussed earlier. ●Turn out your previously connected modem, TP-link router &your computer by dowsing from power. ● Set up your TP-link router model in the middle zone for proper wireless network signal. ●Couple the TP-link router’s antennas to the provided ports in the upright direction and affix them pointing in all directions for uniform signal strength at all sides. ●Bridge the computer to the TP-link router model adjoining them at one of the four given LAN ports of the TP-link Wi-Fi router utilizing an Ethernet cable. ●Next, also link your modem to the TP-link router model adjoining it at the router’s given WAN port making use of another Ethernet cable.
●Boot up all the connected devices - computer, TP-link router model and turn on. ●Initiate the TP-link router setup directing tplinkwifi.net and router login details over web browsing. TP-link router setup directed through tplinkwifi.net 1. Direct the TP link router login over the web browsing window using the login web domain www.tplinkwifi.net utilizing TP-link router login steps as explained below. 2. Perform TP-link router login process over the browser: ●Get to the Internet Browsers on your Computer to reach through the TP-link router login with tplinkwifi.net. ●Input the TP-link router login web protocol address www.tplinkwifi.net or default IP TP 192.168.1.1 n web browser address bar to site the TP-link router configuration page. ●On the displayed login page, enter the TP-link router default information - that is “admin” in both the username and password tabs for reaching into the TP-link router’s admin page. 3. Authorize the TP-link router Configuration for wireless network settings to connect using the wireless SSID/network name And the network key as required. 4. The TP-link router setup is completed following the router configuration of the network directed over tplinkwifi.net.