A Detailed Guide to Removing and Replacing Skid Steer Tracks

1. A Detailed Guide to Removing and Replacing Skid Steer Tracks Rubber tracks are one of the vital components of skid steers, as these machines rely on the tracks for proper movement. The tracks' rubber materials allow the skid steer to navigate rugged terrains while placing minimal pressure on the surface. However, these tracks wear out over time, impacting the machine's efficiency. Fortunately, knowing the signs of degradation can help you determine when to invest in the replacement rubber tracks and reduce downtime. This article will discuss the signs to replace the skid steer tracks and the proper track replacement process. Signs You Need to Replace Skid Steers Rubber Tracks Properly functioning skid steer tracks lead to safe usage of machinery. High-quality rubber tracks protect surfaces and provide optimal traction to the equipment for harsh weather conditions. However, continuous use of rubber tracks beyond their expected lifespan can result in inefficient work and put operators at risk.

2. So, it's vital to recognize the following discussed signs that your skid steer rubber tracks need replacement: External track damage You can easily identify exterior damage to your skid steer. Constant exposure to rocky surfaces can make tracks susceptible to apparent damage. Moreover, conditions like driving over curbs usually place more stress on the rubber. The mini excavator track might have missing components, cracks, exposure to cords, or other damages, indicating they are no longer fit for regular use. Worn sprockets Sprockets are vital for the proper functioning of skid steers. Now that the motor powers them, sprockets can break down faster than other components. The signs you should look for worn-out sprockets include derailing, broken teeth, or unevenness during use. Replacing the sprockets will help because broken pieces can lead to unsafe driving conditions. Irregular tread depth The tread depth of skid steer rubber tracks also signifies their conditions. Your tracks should display consistent depth across surfaces as it creates even traction and stable surfaces. On the other hand, flattened treads can create unstable operating conditions. You should measure the tread depth frequently to gauge its status and replace the track if the tread depth is reduced. Skid Steer Rubber Tracks Replacement Checklist To replace your skid steer rubber tracks, you will need the following: ● ● ● ● Support stands Safety gear like gloves, glasses, and boots Lifts and jacks Specialized removal tools How to Remove and Replace Skid Steer Rubber Tracks?

3. The first thing you should bear in mind is to carry the replacement rubber tracks process in an open area with plenty of room and a flat surface. The following discussed are the basic steps for track removal and replacement: 1. Release the track tension: Use a wrench to loosen the grease fitting. Next, you need to push in the idler frame and remove grease from its position. 2. Lift the equipment: Suspend the skid steer using lifts and jacks. Always use heavy-duty jacks, as they provide the most protection for the machine when lifted in the air. 3. Remove the current track: Take the help of a partner to pull the current rubber track off the front idler and then sprocket. 4. Install the new track: Once the current track is removed, place the new one on the rear idler, sprocket, and then the front idler. See to it that they align with the right grooves. 5. Align the rubber tracks: You can secure the new track by tightening the grease fitting. In addition, get the new track to the correct tension levels with the help of grease. 6. Test the equipment: Lower the machine to the ground and ask the operator to drive it forward and backward to ensure the tracks function correctly. All-in-All All tracks, whether skid steer or mini excavator track, need replacement at some point. You should identify the signs of wear or damage on the skid steer tracks, and if you think they are no longer fit for regular use, consider replacing them. Always find the new rubber tracks that match your skid steer needs. Contact Us Company Name: Track Hutt Address: 324 Saint Andrews Rd,Rincon,GA,31326,United States Phone(s) : (912) 394-3233 Email id: trackhutt@gmail.com Website: https://trackhutt.com/