1 / 9

Fin Design

Fin Design. T . T b. Total heat loss: q f =Mtanh(mL) for an adiabatic fin, or q f =Mtanh(mL C ) if there is convective heat transfer at the tip. Fin Effectiveness.

trina
Download Presentation

Fin Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fin Design T Tb Total heat loss: qf=Mtanh(mL) for an adiabatic fin, or qf=Mtanh(mLC) if there is convective heat transfer at the tip

  2. Fin Effectiveness How effective a fin can enhance heat transfer is characterized by the fin effectiveness f: Ratio of fin heat transfer and the heat transfer without the fin. For an adiabatic fin:

  3. Fin Effectiveness (cont.) • To increase f, the fin’s material should have higher thermal conductivity, k. • It seems to be counterintuitive that the lower convection coefficient, h, the higher f. But it is not because if h is very high, it is not necessary to enhance heat transfer by adding heat fins. Therefore, heat fins are more effective if h is low. Observation: If fins are to be used on surfaces separating gas and liquid. Fins are usually placed on the gas side. (Why?) • P/AC should be as high as possible. Use a square fin with a dimension of W by W as an example: P=4W, AC=W2, P/AC=(4/W). The smaller W, the higher the P/AC, and the higher f. • Conclusion: It is preferred to use thin and closely spaced (to increase the total number) fins.

  4. Fin Effectiveness (cont.)

  5. Fin Efficiency For infinite k T(x)=Tb, the heattransfer is maximum T(x)<Tb for heat transfer to take place Tb x x Total fin heat transfer qf Ideal heat transfer qmax Real situation Ideal situation

  6. Fin Efficiency (cont.) Use an adiabatic rectangular fin as an example: Figures 8-59, 8-60

  7. Overall Fin Efficiency Overall fin efficiency for an array of fins: qf Define terms: Ab: base area exposed to coolant Af: surface area of a single fin At: total area including base area and total finned surface, At=Ab+NAf N: total number of fins qb

  8. Heat Transfer from a Fin Array =Ab+NAb,f

  9. Thermal Resistance Concept L1 A=Ab+NAb,f t Rb=t/(kbA) T1 T T1 Tb T2 T R1=L1/(k1A) Tb T2

More Related