1 / 8

Low Emissivity Coating Options for the HET Enclosure

Low Emissivity Coating Options for the HET Enclosure. 18 September 2002 John Good. Choices Available. Aluminized Mylar (3M product #8437) Emissivity = 0.03 Solar Absorption = 0.15 Aluminum Foil (3M product #427, 2.8 mil. Thick, Compac #804 – Bron Tapes, Inc.) Emissivity (new) = 0.03

trina
Download Presentation

Low Emissivity Coating Options for the HET Enclosure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Low Emissivity Coating Options for the HET Enclosure 18 September 2002 John Good

  2. Choices Available Aluminized Mylar (3M product #8437) Emissivity = 0.03 Solar Absorption = 0.15 Aluminum Foil (3M product #427, 2.8 mil. Thick, Compac #804 – Bron Tapes, Inc.) Emissivity (new) = 0.03 Emissivity (heavily oxidized) = 0.20 Solar Absorption (new) = 0.15 LO/MIT I/II Emissivity = 0.21 Solar Absorption = 0.22 TiO2 (White Paint) Emissivity = 0.87 Solar absorption = 0.25

  3. Where they are in use (an incomplete list). • Aluminized Mylar • SPIE technical papers. • Medical Imaging Equipment • Aluminum Foil • WIYN, LBT, IRTF, Magellan, CTIO? • LO/MIT I • Gemini, GTC

  4. Method of application. • Aluminum Foil • Clean surface with 50/50 alcohol/water solution and allow to dry. • Prime with 3M product #94 primer. • Wet surface with rag and let dry for 5 minutes. • Cut to shape • Paper linered acrylic adhesive. • Peel and stick. • Smooth with squeegee. • LO/MIT I • Water blast. • Dry. • Roll-on (2 coats).

  5. Longevity and Maintenance • Aluminum Foil • No problems reported from facilities using foil. • WIYN – 8 years old. • Failure mode: Adhesive failure (de-lamination). • Replacement: Remove, Clean, & Re-apply. • LO/MIT I • Company line: 6-7 Years • “Coating on steel roof still good after 14 years.” • Failure mode: Abrasion. 100% silicone binder is very soft, flexible and thin (1/2 to 1 mil.). • Replacement: Light water blast, recoat with roller.

  6. Cost (very preliminary) • Dome, CSB roof, GTAG roof • Aluminum Tape: $58-60k • $38,000 + Labor (~8-12 man-weeks) + $7k to $10k (125ft. Manlift) + $1,500 (Misc. Supplies). • LO/MIT I: $19-21k • $5.5k (paint) + Labor (~6-8 man-weeks) + $7k (125ft. Manlift) + $1,500 (Misc. Supplies).

  7. Test plan. • Materials • Aluminum Tape • Does the primer attack the present finish on the dome? • Ease of Application. • Day/Night thermal performance. • LO/MIT I • Ease of application. • Adhesion. • Day/Night thermal performance. • Location • Upper right hand corner of dome aperture (looking out of the dome).

  8. Information Sources • Chas Cavedoni – Gemini • Bob Aresty – SOLEC (manufacturer of LO/MIT) • Dan Neff – M3 Engineering & Technology, Inc. • http://www.electro-optical.com/ • Don Ketchem (Chemical Engineer) - 3M Corporation • George Kuenig – Superintendent IRTF • Bron Tapes of Nevada, LLC • http://www.ctio.noao.edu/telescopes/opteng/dome.html

More Related