1 / 7

Alternating Currents

Current That Is Changing All the Time. Alternating Currents. Key Concepts. A direct current travels in one direction only. In alternating currents the direction of charge flow is changing all the time. The change in direction from forwards to backwards to forwards again is called a cycle .

trinh
Download Presentation

Alternating Currents

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Current That Is Changing All the Time Alternating Currents

  2. Key Concepts • A direct current travels in one direction only. • In alternating currents the direction of charge flow is changing all the time. • The change in direction from forwards to backwards to forwards again is called a cycle. • In Europe there are 50 cycles every second.

  3. DC from a battery +V0 AC waveform Time (s) -V0 ·One complete alternation is called a cycle (NOT wavelength). ·        The frequency is the number of cycles per second. Units are hertz (Hz). ·        The period is the time taken for one cycle. It is measured in seconds. f = 1/T. ·        The current follows exactly the same wave form as voltage.

  4. Why AC? • AC and DC are equally good at heating, lighting, or running motors. DC is essential for chemical processes such as electrolysis. • Low voltage DC is used in electronic devices. •  AC is much more easily distributed than DC.

  5. Root Mean Square Value The values of voltage and current are constantly changing in AC, unlike in DC in which they are steady. We can measure AC voltages in two ways: • Measure the peak to peak voltage, easily done on a cathode ray oscilloscope (CRO). • Measure the root mean square (rms) value, or the effective value.

  6. RMS Value • We use the rms value because its use allows us to do electrical calculations as if they were direct currents. • We measure the rms value with a voltmeter or ammeter.

  7. Relationship Between Peak Value and RMS Value Irms = I0 Vrms = V0 2 2 Voltage RMS voltage Peak Voltage Time Vrms = 0.71 Vpk

More Related