1 / 49

CHEM 312: Lecture 3 Radioactive Decay Kinetics

CHEM 312: Lecture 3 Radioactive Decay Kinetics. Outline Readings: Modern Nuclear Chemistry Chapter 3; Nuclear and Radiochemistry Chapters 4 and 5 Radioactive decay kinetics Basic decay equations Utilization of equations Mixtures Equilibrium Branching Cross section Natural radiation

troy-contreras
Download Presentation

CHEM 312: Lecture 3 Radioactive Decay Kinetics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHEM 312: Lecture 3Radioactive Decay Kinetics Outline • Readings: Modern Nuclear Chemistry Chapter 3; Nuclear and Radiochemistry Chapters 4 and 5 • Radioactive decay kinetics • Basic decay equations • Utilization of equations • Mixtures • Equilibrium • Branching • Cross section • Natural radiation • Dating

  2. Introduction • Number of radioactive nuclei that decay in a sample decreases with time • Exponential decrease • Independent of P, T, mass action • Conditions associated with chemical kinetics • Electron capture and internal conversion can be affected by conditions • Specific for isotope • Irreversible • Decay of given radionuclide is random • Statistical • Evaluate behavior of group

  3. Basic Decay Equations • Decay is 1st order • Rate proportional to amount of parent isotope • Equal to the rate of isotope disintegration • Proportional to number of radioactive nuclei • rate of decay=decay constant*# radioactive nuclei • A=lN • Decay constant is average decay probability per nucleus for a unit time • Represented by l

  4. probability of disintegration independent past history and present circumstances depends only on length of time interval Probability of decay: p=Dt Probability of not decaying: 1-p=1- Dt (1- Dt)n=probability that atom will survive n intervals of Dt nDt=t, therefore (1-  Dt)n =(1-  t/n)n limn∞(1+x/n)n=ex, (1- t/n)n=e-t is limiting value Considering No initial atoms fraction remaining unchanged after time t is N/No= e-t N is number of atoms remaining at time t Basic decay equations N=Noe-t

  5. Radioactivity as Statistical Phenomenon: Error from Counting • Binomial Distribution for Radioactive Disintegrations • Probability W(m) of obtaining m disintegrations in time t from No original radioactive atoms • For radioactive disintegration • p=1-e-t • Average number M of atoms disintegrating in time t is M=No(1-e-t) • For small t, M=Not and disintegration R=M/t=No • Small t means count time is short compared to half life • Corresponds to -dN/dt=N • Expected Standard Deviation • M is number of counts • Relative error = s-1 • What is a reasonable number of counts for an experiment? • More counts, lower error

  6. Measured Activity • Activity (A) determined from measured counts by correcting for geometry and efficiency • Convert counts to decay • Units • Curie • 3.7E10 decay/s • 1 g 226Ra • A= lN • Becquerel • 1 decay/s • A= lN • A=Aoe-t

  7. Half Life and Decay Constant • Half-life is time needed to decrease nuclides by 50% • Relationship between t1/2 and l • N/No=1/2=e-t • ln(1/2)=-t1/2 • ln 2= t1/2 • t1/2=(ln 2)/ • Short half-lives can be measured • Evaluate activity over time • Observation on order of half-life • Long half-lives • Based on decay rate and sample • Need to know total amount of nuclide in sample • A=lN

  8. Exponential Decay • Average Life () for a radionuclide • found from sum of times of existence of all atoms divided by initial number of nuclei • 1/l=1/(ln2/t1/2)=1.443t1/2=t • Average life greater than half life by factor of 1/0.693 • During time 1/ activity reduced to 1/e it’s initial value • Total number of nuclei that decay over time • Dose • Atom at a time

  9. Equations to Utilize • Nt=Noe-lt • N=number of nuclei, l= decay constant, t=time • Also works for A (activity) or C (counts) • At=Aoe-lt, Ct=Coe-lt • A= lN • 1/l=1/(ln2/t1/2)=1.443t1/2=t

  10. Half-life calculation Using Nt=Noe-lt • For an isotope the initial count rate was 890 Bq. After 180 minutes the count rate was found to be 750 Bq • What is the half-life of the isotope • 750=890exp(-l*180 min) • 750/890=exp(-l*180 min) • ln(750/890)= -l*180 min • -0.171/180 min= -l • 9.5E-4 min-1=l=ln2/t1/2 • t1/2=ln2/9.5E-4=729.6 min

  11. Half-life calculation A=lN • A 0.150 g sample of 248Cm has a alpha activity of 0.636 mCi. • What is the half-life of 248Cm? • Find A • 0.636 E-3 Ci (3.7E10 Bq/Ci)=2.35E7 Bq • Find N • 0.150 g x 1 mole/248 g x 6.02E23/mole= 3.64E20 atoms • l=A/N= 2.35E7 Bq/3.64E20 atoms=6.46E-14 s-1 • t1/2=ln2/l=0.693/6.46E-14 s-1=1.07E13 s • 1.07E13 s=1.79E11 min=2.99E9 h=1.24E8 d =3.4E5 a

  12. Counting A=lN • Your gamma detector efficiency at 59 keV is 15.5 %. What is the expected gamma counts from 75 micromole of 241Am? • Gamma branch is 35.9 % for 241Am • C=(0.155)(0.359)lN • t1/2=432.7 a* (3.16E7 s/a)=1.37E10 s • l=ln2/1.37E10 s=5.08E-11 s-1 • N=75E-6 moles *6.02E23/mole=4.52E19 atoms • C=(0.155)(0.359)5.08E-11 s-1*4.52E19 =1.28E8 Bq

  13. Specific activity • Activity of a given amount of radionuclide • Use A=lN • Use of carrier should be included • SA of 226Ra • 1 g 226Ra, t1/2= 1599 a • 1 g * 1 mole/226 g * 6.02E23 atoms/mole = 2.66E21 atom = N • t1/2=1599 a *3.16E7 s/a = 5.05E10 s • l=ln2/ 5.05E10 s =1.37E-11 s-1 • A= 1.37E-11 s-1 * 2.66E21=3.7E10 Bq

  14. Specific Activity • 1 g 244Cm, t1/2=18.1 a • 1 g * 1 mole/244 g * 6.02E23 atoms/mole = 2.47E21 atom = N • t1/2=18.1 a *3.16E7 s/a = 5.72E8 s • l=ln2/ 5.72E8 s =1.21E-9 s-1 • A= 1.21E-9 s-1 * 2.47E21=2.99E12 Bq • Generalized equation for 1 g • 6.02E23/Isotope mass *2.19E-8/ t1/2 (a) • 1.32E16/(Isotope mass* t1/2 (a))

  15. Specific Activity

  16. Specific Activity • Activity/mole • N=6.02E23 • SA (Bq/mole) of 129I, t1/2=1.57E7 a • t1/2=1.57E7 a *3.16E7 s/a = 4.96E14 s • l=ln2/ 4.96E14 s =1.397E-15 s-1 • A= 1.397E-15 s-1 *6.02E23=8.41E8 Bq • Generalized equation • SA (Bq/mole)=1.32E16/t1/2 (a)

  17. Specific Activity

  18. Specific activity with carrier • 1E6 Bq of 152Eu is added to 1 mmole Eu. • Specific activity of Eu (Bq/g) • Need to find g Eu • 1E-3 mole *151.96 g/mole = 1.52E-1 g • =1E6 Bq/1.52E-1 g =6.58E6 Bq/g • =1E9 Bq/mole • What is SA after 5 years • t1/2=13.54 a • = 6.58E6*exp((-ln2/13.54)*5)= • 5.09E6 Bq/g

  19. Lifetime • Atom at a time chemistry • 261Rf lifetime • Find the lifetime for an atom of 261Rf • t1/2 = 65 s • t=1.443t1/2 • t=93 s • Determines time for experiment • Method for determining half-life

  20. Mixtures of radionuclides • Composite decay • Sum of all decay particles • Not distinguished by energy • Mixtures of Independently Decaying Activities • if two radioactive species mixed together, observed total activity is sum of two separate activities: A=A1+A2=c11N1+c22N2 • any complex decay curve may be analyzed into its components • Graphic analysis of data is possible

  21. l=0.554 hr-1 t1/2=1.25 hr l=0.067 hr-1 t1/2=10.4 hr Can determine initial concentration and half-life of each radionuclide

  22. Parent – daughter decay • Isotope can decay into radioactive isotope • Uranium decay series • Lower energy • Different properties • A • Z • Spin • Parity • For a decay parent -> daughter • Rate of daughter formation dependent upon parent decay rate- daughter decay rate

  23. Parent - daughter • For the system 1 decays into 2 • Rearranging gives • Solve and substitute for N1 using N1t=N1oe-lt • Linear 1st order differential equation • Solve by integrating factors • Multiply by el2t

  24. Parent-daughter • Integrate from t • Multiply by e-l2tand solve for N2 Decay of initial daughter Growth of daughter from parent

  25. Parent daughter relationship • Can solve equation for activity from A=lN • Find maximum daughter activity based on dN/dt=0 • Solve for t • For 99mTc (t1/2=6.01 h) from 99Mo (2.75 d), find time for maximum daughter activity • lTc=2.8 d-1, lMo=0.25 d-1

  26. Half life relationships • Can simplify relative activities based on half life relationships • No daughter decay • No activity of daughter • Number of daughter atoms due to parent decay • No Equilibrium • if parent is shorter-lived than daughter (12), no equilibrium attained at any time • daughter reaches maximum activity when 1N1=2N2 • All parents decay, then decay is based on daughter

  27. Half life relationships • Transient equilibrium • Parent half life greater than 10 x daughter half life • (1 < 2) • Parent daughter ratio becomes constant over time • As t goes toward infinity

  28. Half life relationship • Secular equilibrium • Parent much longer half-life than daughter • 1E4 times greater (1 << 2) • Parent activity does not measurably decrease in many daughter half-lives

  29. Many Decays • Bateman solution • Only parent present at time 0

  30. Branching decay • Branching Decay • partial decay constants must be considered • A has only one half life • if decay chain branches and two branches are later rejoined, branches are treated as separate chains • production of common member beyond branch point is sum of numbers of atoms formed by the two paths • Branching ratio is based on relative constants • li/lt is the % of the decay branch

  31. Branching Decay • For a branching decay of alpha and beta • At=Aa+Ab • A=lN, so • ltN=laN+lbN; lt=la+lb • 1=Aa /At+Ab /At; 1=la /lt+lb /lt • Consider 212Bi, what is the half life for each decay mode? • Alpha branch 36 %, beta branch 64 % • t1/2=60.55 min • lt=0.0114; 0.36=la /lt; 0.36=la /0.0114; la=0.0041 • t1/2alpha = 169 min • lt=la+lb; 0.0114=0.0041+lb; 0.0073=lb • t1/2beta = 95.0 min

  32. Equations for production reactions: Cross Sections • The probability of a nuclear process is generally expressed in terms of a cross section  that has the dimensions of an area. • Originates from simple picture that probability for reaction between nucleus and impinging particle is proportional to the cross-sectional target area presented by the nucleus • Doesn’t hold for charged particles that have to overcome Coulomb barriers or for slow neutrons • Total cross section for collision with fast particle is never greater than twice the geometrical cross-sectional area of the nucleus • 10-24 cm2=1 barn

  33. Cross sections • For a beam of particles striking a thin target with minimum beam attenuation the cross section for a particular process is defined as: • When a sample is embedded in a uniform flux of particles incident on it from all direction, such as in a nuclear reactor, the cross section is defined: • Ri= # of processes of type under consideration occurring in the target per unit time • I= # of incident particles per unit time • n= # of nuclei/cm3 • x=target thickness (cm) • =flux of particles/cm2/sec • N=number of nuclei contained in sample

  34. Production of radionuclides • s=cross section • f=neutron flux • t=time of irradiation • (1-exp-(l1t)) gives maximum level (saturation factor) • If the disintegration rate of radioactive product at end bombardment is divided by saturation factor, formation rate is obtained • R=A/(1-e-(lt))

  35. Nuclei production: Short irradiation compared to half-life • Find amount of 59Fe (t1/2=44.5 d, l = 1.803E-7 s-1) from irradiation of 1 g of Fe in a neutron flux of 1E13 n/cm2/s for 1 hour • 58Fe(n,g)59Fe: 58Fe+ n g + 59Fe s=1.3E-24 cm2 • No= 1g/55.845 g/mol *6.02E23 atom/mol*0.00282 • No=3.04E19 atom • R= 1E13 n/cm2/s *1.3E-24 cm2 * 3.04E21 atom • R=3.952E8 atoms/sec • 1.423E12 atoms 59Fe in 1 hour

  36. Nuclei production: Long irradiation compared to half-life • Find amount of 56Mn (t1/2=2.578 hr, l = 7.469E-5 s-1) from irradiation of 1 g of Mn in a neutron flux of 1E13 n/cm2/s for 1 hour • 55Mn(n,g)56Mn: 55Mn+ n g + 56Mn s=13.3E-24 cm2 • No= 1g/54.93804 g/mol *6.02E23 atom/mol • No=1.096E22 atom • R= 1E13 n/cm2/s *13.3E-24 cm2 * 1.096E22 atom • R=1.457E12 atoms/sec • 5.247E15 atoms 56Mn in 1 hour (does not account for decay)

  37. Formation rate from activity • R=A/(1-e-(lt)) • 4.603E15 atoms 56Mn (t1/2=2.578 hr, l = 7.469E-5 s-1) from 1 hour irradiation • A=lN= 4.603E15* 7.469E-5 =3.436E11 Bq • R=A/(1-e-(lt)) • R= 3.436E11/(1-exp(- 7.469E-5 *3600)) • R=1.457E12 atom/sec

  38. Environmental radionuclides • Primordial nuclides that have survived since time elements were formed • t1/2>1E9 a • Decay products of these long lived nuclides • 40K, 87Rb, 238U, 235U, 232Th • shorter lived nuclides formed continuously by the interaction of comic rays with matter • 3H, 14C, 7Be • 14N(n, 1H)14C (slow n) • 14N(n, 3H)12C (fast n) • anthropogenic nuclides introduced into the environment by activities of man • Actinides and fission products • 14C and 3H

  39. Dating • Radioactive decay as clock • Based on Nt=Noe-lt • Solve for t • N0 and Nt are the number of radionuclides present at times t=0 and t=t • Nt from A = λN • t the age of the object • Need to determine No • For decay of parent P to daughter D total number of nuclei is constant

  40. Dating • Pt=Poe-lt • Measuring ratio of daughter to parent atoms • no daughter atoms present at t=0 • All daughter due to parent decay • No daughter lost during time t • A mineral has a 206Pb/238U =0.4. What is the age of the mineral? • 2.2E9 years

  41. Dating • 14C dating • Based on constant formation of 14C • No longer uptakes C upon organism death • 227 Bq 14C/kgC at equilibrium • What is the age of a wooden sample with 0.15 Bq/g C? • t=(1/(ln2/5730 a))*ln(0.227/0.15)=3420 a

  42. Dating • Determine when Oklo reactor operated • Today 0.7 % 235U • Reactor 3.5 % 235U • Compare 235U/238U (Ur) ratios and use Nt=Noe-lt

  43. Topic review • Utilize and understand the basic decay equations • Relate half life to lifetime • Understand relationship between count time and error • Utilization of equations for mixtures, equilibrium and branching • Use cross sections for calculation nuclear reactions and isotope production • Utilize the dating equation for isotope pair

  44. Study Questions • Compare and contrast nuclear decay kinetics and chemical kinetics. • If M is the total number of counts, what is the standard deviation and relative error from the counts? • Define Curie and Becquerel • How can half-life be evaluated? • What is the relationship between the decay constant, the half-life, and the average lifetime? • For an isotope the initial count rate was 890 Bq. After 180 minutes the count rate was found to be 750 Bq. What is the half-life of the isotope? • A 0.150 g sample of 248Cm has a alpha activity of 0.636 mCi. What is the half-life of 248Cm?  • What is the half life for each decay mode for the isotope 212Bi? • How are cross sections used to determine isotope production rate? • Determine the amount of 60Co produced from the exposure of 1 g of Co metal to a neutron flux of 1014 n/cm2/sec for 300 seconds. • What are the basic assumptions in using radionuclides for dating?

  45. Pop Quiz • You have a source that is 0.3 Bq and the source is detected with 50 % efficiency. It is counted for 10 minutes. Which total counts shown below are not expected from these conditions? • 95, 81, 73, 104, 90, 97, 87

  46. Useful projects • Make excel sheets to calculate • Mass or mole to activity • Calculate specific activity • Concentration and volume to activity • Determine activity for counting • Isotope production from irradiation • Parent to progeny • Daughter and granddaughter • i.e., 239U to 239Np to 239Pu

More Related