1 / 26

Lecture C

Lecture C. Semiconductor circuit elements and dependent sources. Semiconductor devices and active circuit elements. Examples: Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) Bipolar Junction Transistors (BJTs) Operational amplifiers (op-amps). Active circuit elements - MOSFETs.

truda
Download Presentation

Lecture C

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture C Semiconductor circuit elements and dependent sources

  2. Semiconductor devices and active circuit elements • Examples: • Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) • Bipolar Junction Transistors (BJTs) • Operational amplifiers (op-amps)

  3. Active circuit elements - MOSFETs • MOSFETs can be modeled as dependent sources • MOSFETs can be n-channel (n-FETs) or p-channel (p-FETs) • Construction and operation of nFETS:

  4. MOSFET operation – continued • Application of a voltage difference between the gate and source allows current to flow from the drain to the source.

  5. N-channel MOSFETs • MOSFETs have 3 terminals • Gate, source, drain • Circuit symbol: • Description of behavior: • Increasing vGS increases drain current • Notes: • External power supply required! • Low power requirements at gate • ID = 0 unless vGS exceeds the threshold voltage (VT)

  6. Fluid system analogy • General MOSFET behavior: • Applied gate-to-source voltage allows current to flow from drain to source • Valve in fluid system

  7. Example MOSFET circuit • If vGS < VT ID = 0 and vOUT = vDS; increasing vGSreducesvOUT

  8. MOSFETs as switches • If the gate voltage of the MOSFET toggles between two values, the MOSFET can behave as a switch:

  9. MOSFETs as dependent sources • Approximate i-v curves: • Simple saturation-region MOSFET model: • Notes: • VT is the threshold voltage; ID = 0 if vGS < VT

  10. Analog and digital signals • Signals (voltages and currents) can be thought of as being either analog or digital • Analog signals are continuous (they take on all intermediate values when they change) • Digital signals are discrete (they can change abruptly between values)

  11. Reminder: annotate previous slide to show analog, digital signal.

  12. Analog and digital signals – continued • Whether a signal (or circuit) is treated is being analog or digital is dependent upon how you want to model the circuit (it depends on the application) • For example, our MOSFET can act in two ways: • A MOSFET acting as a switch is generally treated as a digital circuit element • A MOSFET acting as a dependent source is generally treated as an analog circuit element

  13. p-channel MOSFETs • Operation of p-channel MOSFETs (p-FETs) is “similar” to n-FETs, EXCEPT: • Negative gate voltage applied, and current direction reversed • Operation is “inverted” from the n-FET operation

  14. Demos: • Show MOSFETS • Show variation in source current with gate voltage. (Emphasize that external power supply is required)

  15. Active circuit elements - BJTs • BJTs – Bipolar Junction Transistors • BJTs can be npn or pnp • npn BJT construction: • BJTs can also be used as dependent power sources • BJTs provide a current controlled current source: the base current is used to control the collector-to-emitter current

  16. Discussion: • Probably counter-productive to try to do a detailed discussion of BJT operation. • What (basically) happens is that an applied base current allows a much larger current to flow from the collector to the emitter

  17. npn BJTs – continued • BJTs have three terminals: • Base, collector, emitter • npn BJT circuit symbol: • Approximate i-v curves:

  18. Note that the emitter current is equal to the collector current plus the base current (it is approximately equal to the collector current, since the base current is generally small)

  19. BJTs as dependent sources • Simple active-region BJT model: •  is the current gain; it is generally large (often over 100) • BJTs are commonly used as amplifiers. Low power at the base is converted to high power at the collector/emitter.

  20. Demo: • Show BJTs • Illustrate change in emitter current with base current (voltage). Emphasize external power supply.

  21. Active circuit elements - operational amplifiers • Operational amplifier (or op-amp) based circuits are often used to perform mathematical operations • Operational amplifiers are constructed of a number of transistors, but are typically represented by the circuit symbol:

  22. Annotate previous slide to show: • Two inputs • One output • External power supplies (it’s an active circuit element)

  23. Notes about operational amplifiers • Op-amp circuits have two inputs and one output • Op-amps require (generally) two external power supply inputs • There is (ideally) no current flow into the input terminals • The op-amp absorbs no power from the circuit • The output voltage is the difference in the input voltages, multiplied by a large number (ideally, infinity) • However, the output voltage cannot exceed the range set by the external power supplies

  24. Example op-amp circuits • Inverting voltage amplifier: • This overall circuit can be modeled as a dependent source (it is a voltage controlled voltage source)

  25. Example op-amp circuits • Differencing circuit: • This circuit can also be modeled as a voltage controlled voltage source (except two voltages control the output)

  26. Demo: • Show op-amp • Show op-amp circuits; emphasize external power supplies. Mention voltage rails limit output voltages.

More Related