90 likes | 406 Views
Manufacturing ammonia. Fertilisers and much more. Global production of ammonia. Uses.
E N D
Fertilisers and much more Global production of ammonia Uses The annual production of ammonia remained fairly constant over the past six years or so. Although manufactured in countries around the world, in 2009 the four biggest producers and the quantities they produced are: 80% of ammonia produced is used in the manufacture of fertilisers. 20% is used for other purposes: plastics ● synthetic ● fibres ● explosives ● dyes ● pharmaceuticals ● industrial refrigerant ● industrial and domestic cleaning agent. China 51 352 000 tonnes (about ⅓ of the world’s production) India 13 600 000 tonnes Russia 12 678 000 tonnes USA 9 355 000 tonnes
The process • Ammonia plant • An ammonia plant has a number of key sections: • Primary reformer • Secondary reformer • Carbon dioxide absorber • Ammonia convertor Raw materials The raw materials needed are air, natural gas (or other hydrocarbons) and steam. Removal of sulfur from feedstock, e.g. natural gas, involves these chemical reactions: R-SH + H2 H2S + RH H2S + ZnOZnS + H2O
Primary reformer The chemistry After the removal of sulfur compounds, the gas is mixed with superheated steam and fed into a primary reformer. The mixture is heated to 770 oC in the presence of a nickel catalyst and these reversible reactions occur: CH4 + H2O ⇌ CO + 3H2 ∆Ho298 = +206 kJ mol−1 CO + H2O ⇌ CO2 + H2 ∆Ho298 = −41 kJ mol−1 Overall reaction: CH4 + 2H2O ⇌ CO2 + 4H2 ∆Ho298 = +165 kJ mol−1 The overall reaction (methane and steam to carbon dioxide and hydrogen) is highly endothermic. Therefore, maintaining a high reaction temperature moves the position of equilibrium to the right. The mixture that emerges is called synthesis gas. The plant
Secondary reformer Reforming Only 30-40% of the hydrocarbon is reformed in the primary reformer because of the equilibrium reactions. The synthesis gas is cooled slightly to 735 oC, mixed with air and passed into the secondary reformer. Highly exothermic reactions happen such as: CH4 + 2O2 2H2O + CO2 ∆Ho298 = −82 kJ mol−1 With the energy released and further heating a temperature of about 1000 oC is reached and up to 99% conversion to methane to hydrogen achieved. Nitrogen (from the air) is used later in the synthesis of ammonia. Shift conversion Any remaining carbon monoxide in the gas mixture is converted to carbon dioxide in the shift section of the process: CO + H2O ⇌ CO2 + H2 ∆Ho298 = −41 kJ mol−1 • The shift conversion happens in two stages: • High temperature shift (iron oxide/chromium oxide catalyst at about 400 oC) that lowers the carbon monoxide content from 12-15% to about 3%. • Low temperature shift (copper oxide/zinc oxide-based catalyst at about 200-220 oC) which lowers the carbon monoxide content further to about 0.2-0.4%.
Ammonia synthesis Removal of water and carbon dioxide The gas mixture now consists of mainly hydrogen, nitrogen, carbon dioxide and steam. Cooling the gas causes steam to condense and be removed as liquid water. Carbon dioxide is removed by chemical or physical absorption. It is used for the manufacture of urea. Methanation Any remaining amounts of carbon monoxide and carbon dioxide must be removed before the ammonia synthesis stage as they would poison the catalyst. This is done by reacting them with hydrogen at 300 oC over a nickel-containing catalyst. CO + 3H2 ⇌ CH4 + H2O ∆Ho298 = −206 kJ mol−1 CO2 + 4H2 ⇌ CH4 + 2H2O ∆Ho298 = −165 kJ mol−1 The emerging gas must be completely dry and so water produced in these reactions is removed by condensation. Ammonia synthesis The synthesis of ammonia takes place on an iron catalyst at pressures usually in the range 10-25 MPa and temperatures in the range 350-550 oC N2 + 3H2 ⇌ 2NH3 ∆Ho298 = –92 kJ mol−1 The conditions used are a compromise between yield, speed and energy demands.