1 / 23

Rocks of different origins and ages occur in three fundamentally different geological provinces

Rocks of different origins and ages occur in three fundamentally different geological provinces. Mountain belts Cratons or shield areas Rift systems Have paired deep valleys and flanking mountain ranges Boundaries between valleys and flanking ranges are steeply-inclined faults

ulla
Download Presentation

Rocks of different origins and ages occur in three fundamentally different geological provinces

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rocks of different origins and ages occur in three fundamentally different geological provinces • Mountain belts • Cratons or shield areas • Rift systems • Have paired deep valleys and flanking mountain ranges • Boundaries between valleys and flanking ranges are steeply-inclined faults • Faults accommodate crustal elongation • Rifts experience extensive igneous activity • Volcanoes in rift systems are rarely explosive; volcanism is quiescent

  2. Rocks of different origins and ages occur in three fundamentally different geological provinces • Mountain belts • Cratons or shield areas • Rift systems • Consist of linked collections of deep valleys and moderately high flanking mountain ranges • Steeply-inclined faults mark the boundaries between deep valleys and flanking ranges • Faults accommodate crustal elongation • Valleys and flanking ranges are often the locus of extensive igneous activity • Active volcanoes in rift systems are rarely explosive; volcanism is quiescent

  3. Bulk chemical composition of continents difficult to determine accurately, but we estimate: • Continental rock is relatively enriched in • SiO2 Al2O3 K2O Na2O CaO • Continental rock is relatively depleted in • FeO MgO

  4. Taking the elevation of 1 km below sea level as edge of continents, roughly 40% of earth’s crust is continental

  5. Ocean basins • Four ocean basins on earth at present • Ocean floors have a restricted suite of rock types • Unconsolidated sediments (clays, oozes, etc.) • Fine-grained sedimentary rocks • Extrusive igneous rocks - basalts • Intrusive igneous rocks - gabbros • Foundation isserpentinized peridotites, which are part of the earth’s mantle

  6. Ocean basins • Four ocean basins on earth at present • Atlantic, Pacific, Indian, & Arctic • Find a relatively restricted suite of rock types on ocean floors • Unconsolidated sediments • Fine-grained sedimentary rocks (clays, oozes, etc.) • Extrusive igneous rocks of a particular chemical composition - basalts • Intrusive igneous rocks of the same particular chemical composition - gabbros • All are underlain byserpentinized peridotites, which are part of the earth’s mantle

  7. Ocean floors are so dominated by basalts that the bulk chemical composition of oceanic rock is relatively easy to estimate: • Ocean floor rock is relatively enriched in • Al2O3 CaO FeO MgO • Ocean floor rock is relatively depleted in • SiO2 K2O Na2O

  8. Oceanic rocks are uniformly younger than 200 Ma old While this sounds like an immense length of time, it is only about 5% of earth’s history

  9. Unique geomorphologic features in ocean basins • Continental shelves • 70-80 km wide regions where water depth <200 m • Underlain by thick accumulations of unconsolidated sediments and young sedimentary rocks • Sediment derived from adjacent continent • Strata lie on abasementof continental rock • Are the submerged fringes of continents

  10. Unique geomorphologic features in ocean basins • Continental shelves • Typically 70-80 km wide; water depth is typically <200 m • Often have very thick accumulations of unconsolidated sediments and young sedimentary rocks • Detritus or sediment is derived from the adjacent continent • Sedimentary rocks lie on abasementof regular, continental rock. Basement may be igneous, metamorphic, or old sedimentary rocks, depending upon what crops out above shoreline. • Continental shelves are the submerged fringes of continents • Continental slopes • Continental rises • Abyssal plains

  11. Unique geomorphologic features in ocean basins • Continental shelves • Continental slopes • Seaward of continental shelf, water depths increase from 200 mto3-4 km • Average surface slope is 4-5 • Underlain by sedimentary rocks continuous with those in continental shelves • Basement still is typical continental rock

  12. Unique geomorphologic features in ocean basins • Continental shelves • Continental slopes • Continental slopes are found seaward of continental shelves • Water depths increase from 200 mto3-4 km(5-10 km along ‘active’ continental margins) • Average surface slope is 4-5°; slope is very gentle but is still20x average dip of continental shelves • Underlain by young sedimentary rocks that are continuous with those found in continental shelves • Basement still is typical continental rock • Continental rises • Abyssal plains

  13. Unique geomorphologic features in ocean basins • Continental shelves • Continental slope • Continental rises • Seaward of continental rise • Water depths usually about3-4 km • Average surface slope is ~1° • Underlain by strata continuous with those in continental slopes • Basementcan be either granites or basalts and gabbros

  14. Unique geomorphologic features in ocean basins • Continental shelves • Continental slope • Continental rises • Found seaward of continental rise • Water depths usually about3-4 km(5-10 km along ‘active’ continental margins) • Average surface slope is ~1° • Underlain by young sedimentary rocks that are continuous with those found in continental shelves • Basementmay be either continental rock (granites) or oceanic rock (basalts and gabbros) • Abyssal plains

  15. Unique geomorphologic features in ocean basins • Continental shelves • Continental slopes • Continental rises • Abyssal plains • Lie beneath3.5-5 kmof water • Nearly level, often featurelessplains • Abyssal hills rise <1 km above abyssal plains • Seamountsrise >1 km above abyssal plains • Sea floor sedimentary rocks are distinct from those found near continents • Basement is basalts or gabbros

  16. Unique geomorphologic features in ocean basins • Continental shelves • Continental slopes • Continental rises • Abyssal plains • Nearly levelfloors of ocean basins lie beneath3.5-5 kmof water • Largely featureless, but with some local relief • Abyssal hills rise < 1km above abyssal plains • Seamountsrise > 1 km above abyssal plains • Underlain by young sedimentary rocks that are distinct from those found fringing the continents • Basement is oceanic rock (basalts or gabbros)

  17. Continental shelves, slopes and rises are dissected by submarine canyons • Deep, V-shaped valleys • Some submarine canyons abut or connect with rivers that flow off continents • Turbidity currents derived from rivers erode a continuation of the river • Some submarine canyons are ‘headless’ • Headless canyons often have periodic spacing • inferred to where escaping from sediment weakens sediments and sedimentary rocks, leading to slope failure

  18. Continental shelves, slopes and rises are dissected by submarine canyons • Deep, V-shaped valleys eroded into shelves, slopes and, to a lesser degree, rises • Some submarine canyons abut or connect with rivers that flow off continents • Sediment-charged river water in turbidity currents flows down canyon, eroding a continuation of the river • Some submarine canyons are ‘headless’ • Headless canyons often have periodic spacing along the continental margin • Are inferred form where a high water table leads to weakening of sediments and sedimentary rocks, which causes slope failure

  19. The remaining geomorphic features in ocean basins (found in the abyssal plains) correlate with and correspond to three distinct geological provinces

  20. Mid-ocean ridges (MORs) • Stand 2.5-4 km above abyssal plains, and may be ~1000 kmacross • Axial valleysare 600 m – 2 km lower than ridge mountains • Axial valley/ridge mountains abut oceanic fracture zones • Numerous volcanoes have quiescent eruptions • Axial valleys & ridge mountains composed of basalts in distinctive pillow forms

  21. Mid-ocean ridges (MORs) • Stand 2.5-4 km above abyssal plains, and may be ~1000 kmacross • Characterized by high relief; steep-sided axial valleysortroughsare 600 m – 2 km lower than adjacent ridge mountains • In plan, straight sections of axial valley/ridge mountains abut against oceanic fracture zones • Axial valleys and ridge mountains dotted by active volcanoes that erupt often, with a quiescent eruption style • Axial valleys and ridge mountains composed of volcanic rock - basalts in distinctive pillow forms

  22. Mid-ocean ridges (MORs), continued • Near axial trough, sediments and sedimentary rocks are thin or absent • Sediment thickness increases with distance from axial trough, but never exceeds 1.3 km • Age ofoldestsediments increases with distance from axial trough • Sedimentary rocks are cut by faults, but MORs are not like continental mountains

  23. Mid-ocean ridges (MORs), continued • In vicinity of ridge mountains or axial valleys, rare unconsolidated sediments and sedimentary rocks occur in thin, flat-lying layers • Thickness of sediment cover increases with distance from axial trough, but never exceeds 1.3 km • Sedimentary rocks may be cut by faultsbut are not deformed like sedimentary rocks in continental mountains • Age ofthe oldest sedimentary rock (lying on basalt) is greater at increasing distance from axial trough

More Related