1 / 13

31 août 2011 Didier Laporte – LPNHE Paris

IBL Integration Stave Review Université de Genève. 31 août 2011 Didier Laporte – LPNHE Paris. About the stave. Drawings :. Drawings on EDMS ( cern ) : Stave assembly : ATU-SYS-ED-0007, version 5 , Stave omega : ATU-SYS-ED-0005, version 3 ,

uma-marks
Download Presentation

31 août 2011 Didier Laporte – LPNHE Paris

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IBL Integration Stave Review Université de Genève 31 août 2011 Didier Laporte – LPNHE Paris

  2. About the stave

  3. Drawings : • Drawings on EDMS(cern) : • Staveassembly : ATU-SYS-ED-0007, version 5, • Staveomega : ATU-SYS-ED-0005, version 3, • Stave pipe : ATU-SYS-ED-0011, version 3, • Stavefoam : ATU-SYS-ED-0004, version 3, • Stave face plate : ATU-SYS-ED-0008, version 2, • Stave end block – side A : ATU-SYS-ED-0006, version 5, • Stave end block – side C : ATU-SYS-ED-0009, version 5, • Stave middle leg : ATU-SYS-ED-0010, version 5, • Half central ring : ATU-SYS-ED-0027, version 1, • Blocage central : ATU-SYS-ED-0028, version 1, • 3D model on EDMS (in2p3): I-027361, V.2 : 16 aout 2011

  4. Modules drawings No drawing about mix sensorchoice !!! • ATU-SYS-ED-0012 : Chip 3D sensor position, • ATU-SYS-ED-0013 : Double chip planarsensor position layout, • ATU-SYS-ED-0014 : Simple chip planarsensor position layout,

  5. Module on stave

  6. IBL layout • Stave orientation If α 12,24° • Flex gap : 0,28 mm/1,058mm • Module radius : R 33,25mm If α 14° • Flex gap : 0,8 mm/1,405 mm • Module radius : R 32,77mm

  7. Prototype

  8. Nextstep : part I • Weneed to validatedetailsdrawings, • tolerances • IBL layout, (12,24° / 14°), • Sensorsdrawing (mix choice), • Interface : Flex, Beam Pipe, IST,….) • Reducematerial (yes or no ?) • Prototype aluminium -> prototype PEEK • PEEK from CERN, • Machiningat LPNHE Paris, • Planning…

  9. Staveassembly on support WithUnige

  10. container Length : 8900 mm !!!

  11. Dummystave -> Final stave Length : 7000 mm (2750+1500+2750)

  12. Assembly scenario

  13. Nextstep : part II • Weneed : • Final pieces (LPNHE Paris): • End ring side A • End ring side C • Centrale ring : • Dummystave (x14) (who?), • All interfaces pièces, • Planning.

More Related