What To Do When Car Key Won't Turn In Ignition

1. What To Do When Car Key Won't Turn In Ignition Think of a situation when you have planned to go to some amazing tourist spot with your family in your car and your car won’t turn in the ignition. It is nothing less than a small storm which would shake up your entire plan. You can face issues with your car key not turning in ignition very often even it is about you at home or at the office or at any place without you even knowing about the fault. There can be certain situations when you do not have any help around you or you are not having time to wait for the arrival of ​Locksmith West Los Angeles ​services. Here are a few things which you can do on your own in case you are not able to get your key turned in the ignition. Steer the wheel: the first thing which you must do when your car key is not turning, you must check for the steering wheel. The steering wheel, when moved once it is locked, would resist the movement of the key in the ignition. Moving the steering to the left and the right direction would help you get your key move in the ignition. This is one of the most basic steps which you can perform in the situation of your key not turning in. Lubrication: the next thing which is most probably causing the resistance or friction to the movement of the key in the ignition cylinder is the dry or rusty lock. The continuous use and abrasion of the inside area of ignition cylinder get exposed to rust or other dust and dirt particles which restricts the movement of the key. You can add some lubrication in the keyhole and lubricate the key as well to get it fixed. Once you are done with lubrication, wait for 2-3 minutes and try turning on the key. Fixing and Replacement: the next move can be little tough as in this case you may need to fix or replace your key. Sometimes your key could have some dents or bends in it which may be restricting it to enter properly into the keyhole. In such situation, you can use a hammer or some other tool to get it straight into the ignition. In case, the key does not move in the ignition you may need to reach for the spare key because there can be some fault with the key that cannot be fixed. Ignition cylinder: the next thing is little difficult to perform, because you may have to reach for the ignition cylinder. You need to put some lubricating material and strike the lock pin and get the ignition cylinder out. Once it is out you can replace it with a new one on your own and fix it at the same place to make sure your key start to work well in the ignition.

2. Calling Locksmith: In case, you are done with all these steps, the last move is to reach for the locksmith because now the job is out of your hands. A professional locksmith in West Los Angeles could help you with quick service over your car key lock within 24 hours to make sure you do not face any trouble with the ignition. Moreover, they would also offer you warranty over the replaced parts so that you can rely on quality assurance.