1 / 11

Thermal Analysis of the necessity of A CPU Heat sink fan

Shaun Heldt and Tyler Merrell. Thermal Analysis of the necessity of A CPU Heat sink fan. Background. Most common type of cooling method Keeps CPU at a safe operating temperature Has fan to improve overall heat transfer of fins by introducing forced convection. Materials.

vadin
Download Presentation

Thermal Analysis of the necessity of A CPU Heat sink fan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Shaun Heldt and Tyler Merrell Thermal Analysis of the necessity of A CPU Heat sink fan

  2. Background • Most common type of cooling method • Keeps CPU at a safe operating temperature • Has fan to improve overall heat transfer of fins by introducing forced convection.

  3. Materials • 1 Intel I7-26000K Processor heat sink • 1 Fluke 51 Thermometer with K-thermocouple • 1 Soldering Iron • 1 Hot Glue Gun

  4. Experiment • Used glue gun and soldering iron to simulate a hot CPU • Measured temperature of the center of the heat sink and the fin tip while heating • Measured time to cool after heated • Compared with theoretical calculations to solve for Qout and the required air velocity for forced convection

  5. Data

  6. Natural Convection • Solve for Qout from natural convection of the heat sink to find if cooling due to natural convection is sufficient for cooling CPUs • Note: Qin from CPU equals 80W • Therefore, Qout must be greater than or equal to 80W for natural convection to be sufficient

  7. Natural Convection

  8. Thermal Circuit

  9. Compiled Calculations Qout= 6.77W Therefore, natural convection is not sufficient

  10. Forced Convection • Used forced convection calculations to solve for required airspeed from fans to have a Qout = 80W • Using previous calculations, an h value of 143.138 W/m2 would be required to sufficiently cool the CPU • Using Hilpert’s equation for cross flow of a square geometry and thermophysical properties we found that the required airspeed velocity is 2.913 m/s

  11. Conclusion • Approximations were made to form the model used in calculating the presented values, however, we believe that this model was a reasonable approximation of the system. • We found that forced convection through a heat sink is necessary in CPU cooling

More Related