1 / 9

Advanced TCP/IP Planning and Design

Advanced TCP/IP Planning and Design. Variable Length Subnet Mask (VLSM) Supernetting Classless Enter Domain Routing (CIDR). Variable-Length Subnet Mask. Variable-length subnet mask (VLSM) provide the capability to use different masks in a network for different segments.

valentine-salazar
Download Presentation

Advanced TCP/IP Planning and Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Advanced TCP/IP Planning and Design Variable Length Subnet Mask (VLSM) Supernetting Classless Enter Domain Routing (CIDR)

  2. Variable-Length Subnet Mask • Variable-length subnet mask (VLSM) provide the capability to use different masks in a network for different segments. • Large LANs could use a high bit-mask, while a serial link could use a smaller bit-mask ( /30) for two hosts (routers). • Not all routing protocols support VLSM

  3. VLSM Case How Many IPs will be lost if one of the usable subnets was used in a Point-to-point serial connection??? 172.17.0.0/20

  4. VLSM Case 172.17.48.0/20 • How would VLSM be used to break one of the big subnets into 8 smaller subnets where each subnet would have only 512 hosts?? • How would VLSM be used to break one of the 512-host subnet into several smaller subnets that would be used exclusively for serial links??? 172.17.62.0/23

  5. VLSM Case 172.17.48.0/23 172.17.62.0/30 Subnet bits = ??? Host bits = ??? Subnet bits = ??? Host bits = ??? 172.17.0.0/20

  6. Supernetting • Supernetting groups networks into larger supernets • How: by borrowing bits from the network portion of the address. • Why: Say that you want a LAN network to have more than 254 hosts; a class C network is not sufficient. You can group two Class C networks using supernets. • Benefits: Provide more IP addresses to the LAN segment without using secondary IP addresses on the router interface. (How would this effect the ISP???) • Grouping classfull networks into supernets is considered classless routing.

  7. Supernetting Case • Networks 192.168.4.0/24 and 192.168.5.0/24 are Class C networks with a default mask of 255.255.255.0. • These two networks are the same up to 23 bits. • They are combined or supernetted, into one network—192.168.4.0/23. • The mask for the new network is 255.255.254.0 • The first host address is 192.168.4.1. • The last host address is 192.168.5.254. • The broadcast address is 192.168.5.255.

  8. Address Aggregation • A set of classfull networks can also be summarized in routing entries by creating aggregate addresses at the supernet level. The depicted figure shows how address aggregation summarizes routes • in which Router A sends only one route, 208.10.8.0/22, to its upstream router.

  9. Case • Assume, for example, that network 172.17.0.0/16 will be used in a medium- to large-sized company with nine areas. • Each area could have several sites. • How can the network be divided allowing at least 2000 nodes per area? • Each area have the following: • Two large LANs with around 1000 hosts each • Four medium LANs with 200 hosts, • Five small LANs with 20 hosts, • Reserved addresses for serial links • Available room for future medium and small LANs.

More Related