100 likes | 541 Views
Use of RID IdentiFINDER ultra in Expert Mode. Enter expert mode. Command “OPTIONS”. Expert mode – show spectrum. Go through menu Or directly from the identification display. Expert mode – spectrum menu. Function 1 Function 2. Functions of the spectra mode. EXIT CURRIGHT CLEAR
E N D
Enter expert mode • Command “OPTIONS”
Expert mode – show spectrum • Go through menu • Or directly from the identification display
Expert mode – spectrum menu Function 1 Function 2 • Functions of the spectra mode EXIT CURRIGHT CLEAR LOAD SUB CHAN./ENERGY LT/RT PRESET ACQ/STOP CURLEFT ZOOM + - SAVE IDENTIFY LOG/SQRT/LIN TESTM SLIBSPEC SKIP
MORE OPTIONS SHOW SPECTRUM IDENTIFY OPTIONS PRESET SETUP RECALIBRATE ADVANCED OPTIONS MORE OPTIONS GAMMA/N COUNTING FINDER OPTIONS DOSERATE OPTIONS ALARM OPTIONS ADVANCED OPTIONS SETUP DISP./TIME MAINTENANCE STABILIZATION CALIBRATION SOURCE DATA LOGGING MAINTENANCE CHANGE PASSWORD SHOW STATUS FACTORY DEFAULTS ERASE ALL SPECTRA FACTORY TESTS Expert mode – main menu
Expert mode – main menu MORE OPTIONS See next page • DOSERATE OPTIONS • IntTime [s] 15 • Unit Sv/h, rem/h, Bq GAMMA / N COUNTING • ALARM OPTIONS • Alarm Indication: ON/OFF for sound, vibrating and light • Dose alarm level 200 mSv • Dose rate alarm level 100µSv/h • Neutron alarm level 2 per 20 sec. • FINDER OPTIONS • Time [0.1s] 3 • Sensitivity [%] 100
Expert mode – more options DO CALIBRATION Starts re-calibrating process SHOW SPECTRUM See before • PRESET SETUP • REAL TIME [none] • LIVE TIME [none] • IDENTIFY OPTIONS • Identify Settings: • Time [s] 60 • No. of Nuclides: 2 - 4 • Library: SECUR / Customs / Indust. / Medical / Nuclear / OSI • Edit isotope list: e.g. • Cs-137 SCI--- • I-131 SC-M— • Don’t change this isotope list! ADVANCED OPTIONS See next page
Expert mode – advanced mode • STABILISATION • Source stab. status • PSA stab. status • LED stab. status • SETUP DISPLAY / TIME • Display settings • Language: ENG / SPA / FRA / DEU / RUS • BkLight • Contrast • Autom. OFF • Date / Time • CALIBRATION SOURCE • Cs-137 • K-40 MAINTENANCE See next page • DATA LOGGING • Set ON/Off and measurement time
Expert mode – maintenance FACTORY TEST • Hardware test (buttons) • Display test • Alarm light test • Sound test • CHANGE PASSWORD • Set password (confirming password when you enter expert mode again) • Clear password FACTORY DEFAULT reset to factory settings ERASE ALL SPECTRA erase all stored spectra • SHOW STATUS • Version • Battery • Backup battery • High Voltage