90 likes | 153 Views
One of the best irrigation solenoids to use is 24VAC irrigation solenoid which helps your sprinkler flow the right amount of water the right way.
E N D
Things You Must Know About Irrigation Sprinklers While you get a water sprinkler for your house, you probably think that is the end of it. But no; you certainly cannot simply install it and forget about the rest. There are plenty of things you need to know and take care about it before and after you install the sprinklers. The most important thing you need to keep in mind is the type of irrigation solenoids. One of the best irrigation solenoids to use is 24VAC irrigation solenoid which helps your sprinkler flow the right amount of water the right way.
However, here are a few things you need to know about the irrigation solenoids – The access – Often your sprinkler installers are not licensed plumbers, and most likely, neither are you. Having a licensed professional come in to do simple work will save you a headache and valuable repair time. The pressure of the water – The pressure of the water matters a lot here. The more the pressure, the better. You need to make sure that your sparkler system is fitted in a way that it gives the maximum efficiency and provide you the right balance of the flow of the water that you need. Make sure to look at the bottom of the sprinkler which perfectly explains the markings and use them in order to make sure that you don’t overpower your pumps.
The sprinkler head – There are two main types of sprinkler heads to be installed: fixed and rotary, which put out differing amounts of water. If they're mixed, it can cause big problems for your newly installed system. Be sure you know which heads you have and be mindful of their placement. The solenoids – As mentioned earlier, the solenoids are pretty important parts of your sprinkler. Solenoid is a fancy term for the valves that regulate each zone of your yard. They allow water to enter each zone and shut it off after a specified amount of time. These are the heart of your system and are controlled by low-voltage wiring.
Make sure you know where to pour the water – Whilst you are ready to sprinkle water, you need to make sure that you are sprinkling the water at the right place. Take care of your surrounding and make sure you know where to pour the water. These are a few things you need to know about irrigation solenoids.
Contactus: Valves Direct Locations: PO Box 2037, Magill North, SA, Australia 5072 Phone No: +61 469881108 Website: www.valvesdirect.net/