1 / 14

PPPL: CAD Development of Modular Coils Phase 4

Aug 26, 2003. PPPL: CAD Development of Modular Coils Phase 4. 1/2” Insulation gap was added between housings. 1. 20 Degree segment view. 2. 180 Degree Segment View. 3. Step-Up for connecting surfaces. Coil-Housing surfaces need to be brought inward too aid in clearing the adjacent housing.

vanida
Download Presentation

PPPL: CAD Development of Modular Coils Phase 4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aug 26, 2003 PPPL:CAD Development of Modular CoilsPhase 4

  2. 1/2” Insulation gap was added between housings 1

  3. 20 Degree segment view 2

  4. 180 Degree Segment View 3

  5. Step-Up for connecting surfaces Coil-Housing surfaces need to be brought inward too aid in clearing the adjacent housing 4

  6. Surface Clearances Former collision area 13 11 11 Former collision area 13 5

  7. Coil - 11 6

  8. Coil - 12 7

  9. Coil - 13 8

  10. Coil 11 - with 2” flange height Extra room for clamps and cooling channel 9 * Surfaces not developed

  11. Coil 12 - with 2” flange height 10 * Partially developed surfaces

  12. Coil 13 - with 2” flange height * Partially developed surfaces 11

  13. Collision not yet addressed Simple edge chamfer should make them clear 12

  14. Section views with 2” flange height 13

More Related