Datornätverk A – lektion 5

1. Datornätverk A – lektion 5 Kapitel 6: Multiplexing Adressering: IP-adresser, DNS, DHCP, ARP, subnetting, URL (Visas på tavlan)

2. Chapter 6 Multiplexing

3. Figure 6.2Categories of multiplexing

4. Figure 6.4FDM (Frekvensdelningsmultiplex, frequency division multiplex) Exempel på FDM-teknik: ADSL-modem, kabel-TV-modem, trådlös kommunikation.

5. Figure 6.5FDM demultiplexing example

6. Example 1 Assume that a voice channel occupies a bandwidth of 4 KHz. We need to combine three voice channels into a link with a bandwidth of 12 KHz, from 20 to 32 KHz. Show the configuration using the frequency domain without the use of guard bands. Solution Shift (modulate) each of the three voice channels to a different bandwidth, as shown in Figure 6.6.

7. Figure 6.6Example 1

8. Example 2 Five channels, each with a 100-KHz bandwidth, are to be multiplexed together. What is the minimum bandwidth of the link if there is a need for a guard band of 10 KHz between the channels to prevent interference? Solution For five channels, we need at least four guard bands. This means that the required bandwidth is at least 5 x 100 + 4 x 10 = 540 KHz, as shown in Figure 6.7.

9. Figure 6.7Example 2

10. Example 3 Four data channels (digital), each transmitting at 1 Mbps, use a satellite channel of 1 MHz. Design an appropriate configuration using FDM Solution The satellite channel is analog. We divide it into four channels, each channel having a 250-KHz bandwidth. Each digital channel of 1 Mbps is modulated such that each 4 bits are modulated to 1 Hz. One solution is 16-QAM modulation. Figure 6.8 shows one possible configuration.

11. Figure 6.8Example 3

12. Example 4 The Advanced Mobile Phone System (AMPS) uses two bands. The first band, 824 to 849 MHz, is used for sending; and 869 to 894 MHz is used for receiving. Each user has a bandwidth of 30 KHz in each direction. The 3-KHz voice is modulated using FM, creating 30 KHz of modulated signal. How many people can use their cellular phones simultaneously? Solution Each band is 25 MHz. If we divide 25 MHz into 30 KHz, we get 833.33. In reality, the band is divided into 832 channels.

13. 6.2 WDM Wave Division Multiplexing (Fiber optics)

14. Figure 6.10WDM = Wave division multiplexing Fiberkabel En laser per kanal

15. Figure 6.11Prisms in WDM multiplexing and demultiplexing

16. Figure 6.12TDM, Tidsmultiplex (Time Division multiplex)

17. Note: TDM is a digital multiplexing technique to combine data.

18. Figure 6.13TDM frames

19. Note: In a TDM, the data rate of the link is n times faster, and the unit duration is n times shorter.

20. Figure 6.14Interleaving

21. Example 6 Four channels are multiplexed using TDM. If each channel sends 100 bytes/s and we multiplex 1 byte per channel, show the frame traveling on the link, the size of the frame, the duration of a frame, the frame rate, and the bit rate for the link. Solution The multiplexer is shown in Figure 6.15.

22. Figure 6.15Example 6

23. Example 7 A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. Show the output with four arbitrary inputs. What is the frame rate? What is the frame duration? What is the bit rate? What is the bit duration? Solution Figure 6.16 shows the output for four arbitrary inputs.

24. Figure 6.16Example 7

25. Figure 6.18DS hierarchy

26. Figure 6.19T-1 line for multiplexing telephone lines

27. Table 6.2 E line rates

28. Figure 6.21Multiplexing and inverse multiplexing Exempel: ISDN