270 likes | 529 Views
TopSURV. TopSURV – Start. Tap on. TopSURV - Static. Tick this to use Bluetooth. Select the device to use. TopSURV - Static. Tips: You will normally use demo mode. End users will not see this as they should have the activation ID for GPS+ after purchasing TopSURV. TopSURV - Static.
E N D
TopSURV – Start Tap on
TopSURV - Static Tick this to use Bluetooth Select the device to use
TopSURV - Static Tips: You will normally use demo mode. End users will not see this as they should have the activation ID for GPS+ after purchasing TopSURV.
TopSURV - Static Only “default” job is available if you run TopSURV for the first time Select the device to use
TopSURV - Static Tap here Tap here
TopSURV - Static Tap here Enter name Tips: For controller without keyboard, the TopSURV will display a input board once user tapping in any empty columns. Tips: controller with build in keyboard user can simply use it to enter name.
TopSURV - Static Tap here To create one tap here If you have a preset configuration you can use the dropdown list and select it
TopSURV - Static Tap here Enter a name Select survey type in this case PP Static The number of survey type is depend on the module purchase This list is the default setting and depend on the module purchase To create a new configuration
TopSURV - Static Tap here This will simulate GPS signal mostly use for training Select the base manufacturer
TopSURV - Static Tap here to continue Select receiver model Enter elevation mask Select antenna type and height
TopSURV - Static Tap here Enter logging rate Chose location log file to be store Define file name to use default or user define
TopSURV - Static Tap here Tap here Stake out setting does not apply to static survey Enter initialization time require
TopSURV - Static Tap here Tap here Stake out setting does not apply to static survey
TopSURV - Static What is Co-Op Tracking? GPS Co-Op Tracking allows you to go places and work accurately where no other receiver can. So what exactly is GPS Co Op tracking? The best way to explain it is with an example. Tracking a star at night using a pair of binoculars is pretty easy when sitting in one place. But, tracking the same star while you are driving across a bumpy road at 20 mph and passing through trees is nearly impossible. GPS Co-op tracking is a unique way to use the satellites with their extremely precise and predictable orbit (position) to look back at the moving GPS receiver and keep it in it’s field of view at all times, and when it disappears under tree’s or behind a building for a few seconds, to immediately pick it up when it reappears, hence the term co-op tracking. The receiver and satellites are co-operating to perform this advanced tracking capability.
TopSURV - Static Tap here Tap here
TopSURV - Static Tap here Tap here Tap here Tap here Select geoid file if you country use geoid Tap here Tap here Select this Tap here Tap here Tap here Tap here
TopSURV - Static Tap here Tap here Select unit to use
TopSURV - Static Tap here Tap here
TopSURV - Static Tap Here Tap Here Tap here Tap here Tap here
TopSURV – Static Enter point number or name Enter code
TopSURV - Static Enter name of the point Enter description of the code Select style of point, line and area Select type Point Line Area
TopSURV - Static Enter attribute Capture photo note
TopSURV - Static Tap here Tap here Tips: Please ensure you have sufficient observation time in relation to baseline length. Tips: You can change elevation mask by tapping on Settings.
TopSURV - Static Tap here Tap here