1 / 86

Frame Relay

Frame Relay. W.lilakiatsakun. Introduction (1). Frame Relay is a high-performance WAN protocol that operates at the physical and Data Link layers of the OSI reference model. a simpler version of the X.25 protocol

vinnie
Download Presentation

Frame Relay

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Frame Relay W.lilakiatsakun

  2. Introduction (1) • Frame Relay is a high-performance WAN protocol that operates at the physical and Data Link layers of the OSI reference model. • a simpler version of the X.25 protocol • Network providers commonly implement Frame Relay for voice and data as an encapsulation technique, used between LANs over a WAN.

  3. Introduction (2)

  4. Introduction (3)

  5. Introduction (4)

  6. Introduction to Frame Relay (1) • Frame Relay has lower overhead than X.25 because it has fewer capabilities. • Frame Relay does not provide error correction, modern WAN facilities offer more reliable connection services and a higher degree of reliability than older facilities. • The Frame Relay node simply drops packets without notification when it detects errors.

  7. Introduction to Frame Relay (2) • Frame Relay handles volume and speed efficiently by combining the necessary functions of the data link and Network layers into one simple protocol. • As a data link protocol, Frame Relay provides access to a network, delimits and delivers frames in proper order, and recognizes transmission errors through a standard Cyclic Redundancy Check.

  8. Introduction to Frame Relay (3) • As a network protocol, Frame Relay provides multiple logical connections over a single physical circuit and allows the network to route data over those connections to its intended destinations.

  9. Introduction to Frame Relay (4)

  10. Frame Relay Operation (1) • The connection between a DTE device and a DCE device consists of both a Physical layer component and a link layer component: • The physical component defines the mechanical, electrical, functional, and procedural specifications for the connection between the devices.

  11. Frame Relay Operation (2) • The link layer component defines the protocol that establishes the connection between the DTE device, such as a router, and the DCE device, such as a switch. • Frame Relay access device (FRAD) is known as the DTE. • The FRAD is sometimes referred to as a Frame Relay assembler/dissembler and is a dedicated appliance or a router configured to support Frame Relay.

  12. Virtual Circuit (1) • The connection through a Frame Relay network between two DTEs is called a virtual circuit (VC). • The connection is logical, and data moves from end to end, without a direct electrical circuit. • With VCs, Frame Relay shares the bandwidth among multiple users

  13. Virtual Circuit (2)

  14. Virtual Circuit (3) • There are two ways to establish VCs: • SVCs, switched virtual circuits, are established dynamically by sending signaling messages to the network (CALL SETUP, DATA TRANSFER, IDLE, CALL TERMINATION). • PVCs, permanent virtual circuits, are preconfigured by the carrier, and after they are set up, only operate in DATA TRANSFER and IDLE modes. • Note that some publications refer to PVCs as private VCs.

  15. Frame Relay DLCIs (1) • Frame Relay DLCIs (Data Link Connection Identifier) • They have local significance, which means that the values themselves are not unique in the Frame Relay WAN. • A DLCI identifies a VC to the equipment at an endpoint. • Two devices connected by a VC may use a different DLCI value to refer to the same connection.

  16. Frame Relay DLCIs (2)

  17. Frame Relay DLCIs (3)

  18. Frame Relay DLCIs (4)

  19. Frame Relay DLCIs (5)

  20. Multiple VC (1) • Frame Relay is statistically multiplexed, meaning that it transmits only one frame at a time, but that many logical connections can co-exist on a single physical line. • This capability often reduces the equipment and network complexity required to connect multiple devices, making it a very cost-effective replacement for a mesh of access lines

  21. Multiple VC (2)

  22. Frame Relay Encapsulation (1)

  23. Frame Relay Encapsulation (2)

  24. Frame Relay Encapsulation (3) • DLCI • The 10-bit DLCI is the essence of the Frame Relay header. • This value represents the virtual connection between the DTE device and the switch. • Each virtual connection that is multiplexed onto the physical channel is represented by a unique DLCI.

  25. Frame Relay Encapsulation (4) • Extended Address (EA) • If the value of the EA field is 1, the current byte is determined to be the last DLCI octet. • Although current Frame Relay implementations all use a two-octet DLCI, this capability does allow longer DLCIs in the future. • The eighth bit of each byte of the Address field indicates the EA.

  26. Frame Relay Encapsulation (5) • C/R (Command/Response) • The bit that follows the most significant DLCI byte in the Address field. • The C/R bit is not currently defined. • Congestion Control ( The FECN, BECN, and DE bits ) contains 3 bits that control the Frame Relay congestion-notification mechanisms.

  27. Frame Relay Topology (1) • Star Topology (Hub and Spoke) • A Company has a central site that acts as a hub and hosts the primary services. • the location of the hub is usually chosen by the lowest leased-line cost • Connections to each of the remote sites act as spokes. • each remote site has an access link to the Frame Relay cloud with a single VC.

  28. Frame Relay Topology (2)

  29. Frame Relay Topology (3)

  30. Frame Relay Topology (4) • Full Mesh Topology • A full mesh topology suits a situation in which the services to be accessed are geographically dispersed and highly reliable access to them is required. • A full mesh topology connects every site to every other site.

  31. Frame Relay Topology (5)

  32. Frame Relay Topology (6)

  33. Frame Relay Topology (7) • Partial Mesh Topology • With partial mesh, there are more interconnections than required for a star arrangement, but not as many as for a full mesh. • The actual pattern is dependant on the data flow requirements.

  34. Frame Relay Address Mapping (1) • Inverse ARP (The Inverse Address Resolution Protocol) • To obtain Layer 3 addresses of other stations from Layer 2 addresses, such as the DLCI in Frame Relay networks. • It is primarily used in Frame Relay and ATM networks.

  35. Frame Relay Address Mapping (2) • Dynamic Mapping • The Frame Relay router sends out Inverse ARP requests on its PVC to discover the protocol address of the remote device. • The router uses the responses to populate an address-to-DLCI mapping table on the Frame Relay router or access server.

  36. Frame Relay Address Mapping (3) • Static Mapping • The user can choose to override dynamic Inverse ARP mapping by supplying a manual static mapping for the next hop protocol address to a local DLCI. • You cannot use Inverse ARP and a map statement for the same DLCI and protocol.

  37. Frame Relay Address Mapping (4)

  38. LMI (Local Management Interface) (1) • The LMI is a keepalive mechanism that provides status information about Frame Relay connections between the router (DTE) and the Frame Relay switch (DCE). • Every 10 seconds or so, the end device polls the network, either requesting a dumb sequenced response or channel status information.

  39. LMI (Local Management Interface) (2) • If the network does not respond with the requested information, the user device may consider the connection to be down. • When the network responds with a FULL STATUS response, it includes status information about DLCIs that are allocated to that line. • The end device can use this information to determine whether the logical connections are able to pass data.

  40. LMI (Local Management Interface) (3)

  41. LMI (Local Management Interface) (4) • LMI Extensions (1) • VC status messages • Provide information about PVC integrity by communicating and synchronizing between devices, periodically reporting the existence of new PVCs and the deletion of already existing PVCs. • VC status messages prevent data from being sent into black holes (PVCs that no longer exist).

  42. LMI (Local Management Interface) (5) • LMI Extensions (2) • Multicasting • Allows a sender to transmit a single frame that is delivered to multiple recipients. • Multicasting supports the efficient delivery of routing protocol messages and address resolution procedures that are typically sent to many destinations simultaneously.

  43. LMI (Local Management Interface) (6) • LMI Extensions (3) • Global addressing • Gives connection identifiers global rather than local significance, allowing them to be used to identify a specific interface to the Frame Relay network. • Global addressing makes the Frame Relay network resemble a LAN in terms of addressing, and ARPs perform exactly as they do over a LAN.

  44. LMI (Local Management Interface) (7) • LMI Extensions (4) • Simple flow control • Provides for an XON/XOFF flow control mechanism that applies to the entire Frame Relay interface. • It is intended for those devices whose higher layers cannot use the congestion notification bits and need some level of flow control

  45. LMI (Local Management Interface) (8)

  46. LMI Frame Format

  47. LMI Operation (1)

  48. LMI Operation (2)

  49. LMI Operation (3)

  50. LMI Operation (4)

More Related