1 / 6

RPL Applicability Statement for AMI

RPL Applicability Statement for AMI . Jorjeta Jetcheva (jorjeta.jetcheva@itron.com). IETF #81, IETF ROLL WG Québec City, Canada July 25-29, 2011. Scope & Goals. Why we need applicability statement for AMI AMI in rapid deployment world-wide

viola
Download Presentation

RPL Applicability Statement for AMI

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RPL Applicability Statement for AMI Jorjeta Jetcheva (jorjeta.jetcheva@itron.com) IETF #81, IETF ROLL WG Québec City, Canada July 25-29, 2011

  2. Scope & Goals • Why we need applicability statement for AMI • AMI in rapid deployment world-wide • Strong momentum in the Smart Grid industry towards utilizing open standards • Document how RPL can be used to meet AMI routing requirements • What this document is NOT • Document is not a deployment guide

  3. Document Overview (draft-ietf-roll-applicability-ami-01) • Introduction • Electric Metering • Gas and water metering • Deployment Scenarios • Network Topology • Traffic Characteristics • Using RPL to Meet Functional Requirements • RPL Profile • RPL Features • RPL Options • Recommended Configuration Defaults & Ranges • Manageability Considerations • Security Considerations • Others: TBD

  4. Sample AMI Deployment Scenario Characteristics • Millions of resource-constrained devices, including meters, DA devices, etc. • Network densities vary widely (1 to 100s of neighbors per node) • Each 1-10K devices form their own routing domain • Traffic between the meter and utility networks goes through one or more Network Aggregation Points (NAPs)

  5. Example AMI Applications • Meter Data Management (MDM) • Unicast & multicast communication between a utility application and the meters • Scheduled traffic, e.g., periodic meter reads • On-demand traffic, e.g., demand reads • Distribution Automation • Delay sensitive & delay tolerant P2P applications

  6. Status • The RPL AMI applicability Internet-Draft addresses one of the ROLL WG charter work items • Thank you for all comments received so far. Some active discussions going on in the following areas: • Comments on Trickle parameterization • Network density considerations • PAP2, SG-Net work at Open-SG/SG-Net • Looking forward to continued discussion/comments/feedback

More Related